İsmail COŞKUN, Osman KALENDER, Yavuz EGE

İndüksiyon Bobin Silahı İçin Uygun Stator Bobini Geometrisinin Araştırılması

Bu çalışmada, indüksiyon bobin silahı için uygun bir stator bobini geometrisi araştırılmıştır. Benzetim programları ile yapılan analizler ve deneysel çalışmalar sonucunda merminin fırlatıcıdan çıkış hızında, stator ve mermi bobininin ortak indüktansını belirleyen değişkenlerin etkili olduğu görülmüştür. İndüksiyon bobin silahında uygun stator bobini geometrisinin tespit edilmesi, çözülmesi gereken çok önemli bir problemdir. Bu maksatla, mikrodenetleyici kontrollü yeni bir indüksiyon bobin silahı tasarlanmış ve bu çalışma kapsamında stator bobini bobini geometrisinin, merminin çıkış hızına etkileri araştırılarak sonuçlar ayrıntılı olarak tartışılmıştır

THE RESEARCH OF THE SUITABLE STATOR COIL GEOMETRY FOR INDUCTION COIL GUN

In this study, the suitable geometry of a stator coil for induction coil gun have been researched. As the result of analyses and experimental studies made through simulations, the parameters determining the mutual inductance of the stator and the projectile coils have been effective in the projectile speed. In the induction coil gun, finding the suitable geometry of the stator coil are one of the most important problems needed to be solved. In this case, a new type microcontroller basis induction coil gun has been designed and the effects of geometry of the stator coil on the projectile speed has been researched and the results have been discussed

Keywords:

Induction coil gun Stator Coil, Flux concentrator Coil, Projectile Speed,

PDF

___

(1) Kaye, R.J., “ Design and Performance of Sandia’s contactless coilgun for 50 mm projectiles,”, IEEE Trans. on Mag., 29: 680-685 (1993).
(2) Bauer, D. P., “A Novel Railgun Launcher Design”, IEEE Trans. on Mag., 3(1): 267- 272 (1995).
(3) Matyac, M. J., Christopher, F., Jaminson, K.A., Persad C. and Marshall R.A., “Railgun Performance Enhancement From Distribution of Energy Feeds”, IEEE Trans. on Mag., 31(1): 332-337 (1995).
(4) Ingram, S. K., “Theoretical Analysis of a Collapsing Field accelerator”, 6th Symposium of Electromagnetic Launch Technology, Austin, Texas, 28-30 (1992).
(5) Seely, S. and Poularikas A. D., “Electromagnetics–Classical and Modern Theory and Applications”, Marcel Dekker Inc., New York, 19-21 (1979).
(6) He, J. L., Levi E., Zabar Z. and Birenbaum L. “Concerning the Design of Capacitively Driven Induction Coil Guns”, IEEE Trans. on Plasma Science, 17(3): 429-438 (1984).
(7) Andrews, J. A., “Coilgun Structures”, IEEE Trans. on Mag., 29(1): 637-642 (1993).
(8) Williamson, S., Horne C.D. and Haugh D.C., “Design of Pulsed Coil-Guns”, IEEE Trans. on Mag., 31(1): 516-521 (1995).
(9) Laithwaite, E. R., “Propulsion Without Wheels”, English University Pres Ltd., 74-79 (1966).
(10) Eliot, D. G. “Travelling-Wave Induction Launchers”, IEEE Trans. on Mag., 25(1): 159-163 (1989).
(11) Honig, E.M., “Progress in Developing Repetitive Pulse System Utilizing Inductive Energy Store”, 4th IEEE Pulsed Power Conference, Albuquerque, New Mexico, 6-8 (1983).
(12) McKinney, K. and Mongeau, P., “Multiple Stage Pulsed Induction Acceleration”, IEEE Trans. on Mag., 20(2): 239-242 (1984).