Plazma Ark Kaynağıyla Birleştirilen AISI 410S Ferritik Paslanmaz Çeliğin Mikroyapı ve Mekanik Özelliklerine Isıl İşlemin Etkisi

Bu çalışmada, AISI 410S ferritik paslanmaz çelik saclar farklı kaynak parametreleri kullanılarak plazma ark kaynak yöntemi ilebirleştirilmiştir. Plazma ark kaynaklı birleştirmelere kaynak sonrası ısıl işlem uygulanmıştır. Isıl işlemli ve ısıl işlemsizbirleştirmelerin mekanik özellikleri ve mikroyapısı incelenmiştir. Çalışma sonucunda, artan ısı girdisine bağlı olarak tane yapısınınirileşmesi nedeniyle kaynaklı birleştirmelerin çekme dayanımı ve sertliğinde azalma meydana gelmiştir. Ayrıca ısıl işlem uygulanankaynaklı birleştirmelerin sertlik ve çekme dayanımı ısıl işlemsiz birleştirmelere göre daha düşük bulunurken, sünekliğin arttığıbelirlenmiştir.

Influence of Heat Treatment on Microstructure and Mechanical Properties of Plasma Arc Welded AISI 410S Ferritic Stainless Steel

In this study, AISI 410S ferritic stainless steel sheets were joined with plasma arc welding method by using different welding parameters. Heat treatment was applied to plasma welded joints. This study investigated mechanical properties and microstructure of heat treated and non heat treated plasma welded joints. The study revealed that, there have been decreases in tensile strength and hardness of welded joints because of grain coarsening caused by increasing heat input. Hardness and tensile strength of heat treated welded joints were lower and ductility was increasing compared to the ones of non heat treated welded joints.

PDF

___

[1] Lippold J C and Kotecki DJ 2005 Welding Metallurgy and Weldability of Stainless Steels. New York: A John Wiley & Sons.
[2] Taban, E., Deleu, E., Dhooge, A. ve Kaluç, E. (2009). Laser welding of modified 12% Cr stainless steel: Strength, fatigue, toughness, microstructure and corrosion properties. Materials and Design, 30, 1193-1200.
[3] Taban, E., Dhooge, A. ve Kaluç, E. (2009). Plasma arc welding of modified 12%Cr stainless steel. Materials and Manufacturing Processes, 24, 649-656.
[4] Köse, C. ve Topal, C. (2019). Effect of post weld heat treatment and heat input on the microstructure and mechanical properties of plasma arc welded AISI 410S ferritic stainless steel. Materials Research Express, 6, 066517.
[5] Amuda, M. O. H. ve Mridha, S. (2011). An overview of sensitization dynamics in ferritic stainless steel welds. International Corrosion Science, Article ID 305793, 1-9.
[6] Correa, E. O., Costa, S. C. ve Santos, J. N. (2008). Weldability of iron-based powder metal materials using pulsed plasma arc welding process. Journal of Materials Processing Technology,198, 323-329.
[7] Taban, E. (2008). Toughness and microstructural analysis of superduplex stainless steel joined by plasma arc welding. Journal of Materials Science, 43, 4309-4315.
[8] Tan, H., Wang, Z, Jiang, Y., Han, D., Hong, J., Chen, L., Jiang, L. ve Li, J. (2011) .Annealing temperature effect on the pitting corrosion resistance of plasma arc welded joints of duplex stainless steel UNS S32304 in 1.0 M NaCl. Corrosion Science, 53, 2191-2200.
[9] Kökey, C., Sezgin, S., Çavuşoğlu, N., İrizalp, S.G. ve Saklakoğlu, İ.E. (2016). İnce paslanmaz çelik sacların fiber lazer ile kaynak edilebilirliğinin incelenmesi. Mühendis ve Makina, 57, 66-72.
[10] Aydın, K. ve Karaağaç, İ. (2019). Lazer kaynaklı HSLA sac malzemelerde geri esnemenin deneysel araştırılması. Avrupa Bilim ve Teknoloji Dergisi, 17, 29-37.
[11] Gupta, S. K., Raja, A. R., Vahista, M. ve Yusufzai, M. Z. K. (2019). Hysteresis loop analysis of gas metal arc welded ferritic stainless steel plate. Materials Research Express, 6, 096110.
[12] Abioye, T. E., Omotehinse, I. S., Oladele, I. O., Olugbade, T. O. ve Ogedengbe, T. I. (2020). Effects of post-weld heat treatments on the microstructure, mechanical and corrosion properties of gas metal arc welded 304 stainless steel. World Journal of Engineering, 17, 87-96.
[13] Köse, C. ve Topal, C. (2019). Laser welding of AISI 410S ferritic stainless steel. Materials Research Express, 6, 0865g4.
[14] Gordon, W. ve van Bennekom, A. (1996). Review of stabilisation of ferritic stainless steels. Materials Science and Technology, 12, 126-131.
[15] El-Batahgy, A. (1997). Effect of laser welding parameters on fusion zone shape and solidification structure of austenitic stainless steels. Materials Letters, 32, 155-163.
[16] Kou, S. (2003). Welding Metallurgy. Hoboken: Second Editon A John Wiley & Sons INC. Publication.
[17] Amuda, M. O. H. ve Mridha, S. (2013). Grain refinement and hardness distribution in cryogenically cooled ferritic stainless steel welds. Materials and Design, 47, 365-371.
[18] Kah, D. H. ve Dickinson, D. W. (1981). Weldability of ferritic stainless steels. Welding Journal, August, 135-142.
[19] Pekkarinen, J. ve Kujanp, V. (2010). The effects of laser welding parameters on the microstructure of ferritic and duplex stainless steels welds. Physics Procedia, 5, 517-523.