Hatice YILDIZ DURAN, Dilaver PORSUK, Esra DEMİRHAN

116128

Free Electron Laser Optimisation with Genesis 1.3

Free Electron Laser Optimisation with Genesis 1.3

5 - 100 nm wavelength laser beam design study has been done from 1 GeV electron beam energy. By using Superconducting 1½ - cell gun cavity has been considered to give first push to electrons after the extraction of the electrons from photocathode. Furthermore, 8 ? 9 - cell superconducting cavities are considered in the simulations for main acceleration part in order to accelerate electrons to get close to speed of light. When the desired beam is obtained energetically, beam are sent to undulator section, where the electron beam is radiated. By using Genesis 1.3 Code whole beam behaviour are simulated inside the undulator section. In this study, output power, intensity of radiation, ponderomotive force, phases of radiation are traced and obtained throughout the undulator. Optimized beam and laser parameters are presented.

___

http://pbpl.physics.ucla.edu/~reiche/
P. Elleaume et al. / NIM-A, 455, 2000, 503-523.
http://www.ittvis.com/language/en
US/Downloads/ProductDownloads.aspx
M. Xie, Proceedings of PAC 1995, p.183.

Avrupa Bilim ve Teknoloji Dergisi-Cover

Yayın Aralığı: 4
Başlangıç: 2013
Yayıncı: Osman Sağdıç

Arşiv

Sayıdaki Diğer Makaleler

Free Electron Laser Optimisation with Genesis 1.3

Hatice YILDIZ DURAN, Dilaver PORSUK, Esra DEMİRHAN

Biochemical Changes in the Composition of Saliva in Young Men from North Jordan Using Mobile Phones

Khalid M Abu KHADRA, Ahmad M KHALİL, Mahmoud Abu SAMAK, Ahmad ALJABERİ

Calculation of Neutron Production in Selected Target Materials by Beam of Protons Using FLUKA Code

Demet SARIYER, Rahmi KÜÇER, Nermin KÜÇER

Manufacturing of a Hand Bone Structure From CTScan Data by Using 3D FDM Desktop Printer

Thoermodynamic Analyses of Steam Injected Gas Turnine Cogeneration Cycles

İlhan Tekin ÖZTÜRK, Rabi KARAALİ

Effects of Spark Plasma Sintering Parameters of Boron Carbide Ceramics Using Metallic Aluminum in Square Cross Section

Meral CENGİZ, S Çağrı ÖZER, A Beril TUĞRUL, Filiz Cinar SAHİN, Gültekin GÖLLER, Onuralp YÜCEL, Bülent BÜYÜK

The Effect of Cold Stream of Vortex Tube on Efficiency of the Vapor Compression Refrigeration System

Merve ŞENTÜRK ACAR, Oğuz ARSLAN

Characterization of ITO Thin Films Prepared by DC Magnetron Sputtering

Nalan Çiçek BEZİR, Dumitru LUCA, Aydın Kamil ERDEM

The Calculated Neutron Capture Cross-Section of the 238U and 232Th in the Range of 5-20 MeV

U AKÇAALAN, R ÜNAL, B. ORUNCAK

Effect of Torsional Stiffness on Distribution of Live Load on Skew Bridges

Iman MOHSENİ, Khalim RASHİD