Color stability of CAD/CAM materials with colored beverages thermocycling

Aim: The aim of this study was to compare the effects of different surface finishing treatments applied to two different CAD/CAMmaterials on the color stability after thermal aging with coffee and cola.Materials and Methods: Polymerized resin nanoceramic (LAVA Ultimate, LU) and lithium disilicate glass-ceramic (IPS e.max CAD, EC)were examined in the study. The samples with A1 HT color at a size of 14 x 12 mm and a thickness of 0.5 ± 0.05 mm were preparedfrom these ceramic materials (N=144). Color measurement of each specimen was calculated with a spectrophotometer using colorparameters on a gray backing between baseline color, polishing/glazing and after 5000 cycles of coffee and cola thermocycling.ANOVA and the Fisher’s LSD test were used for testing statistical significance (p < 0.05).Results: LU exhibited higher color change values than EC after thermal aging. In the EC group, glazing provided statistically differentresults as compared to the manual and control groups (p < 0.05). The lowest color change for all stages was observed in IPS e.maxCAD ceramics that were treated by glazing.Conclusion: In terms of color stability, glazing can be recommended for EC, and manual polishing as an alternative to glazing for LU.

PDF

___

1. Barizon KT, Bergeron C, Vargas MA, et al. Ceramic materials for porcelain veneers: part II. Effect of material, shade, and thickness on translucency. J Prosthet Dent 2014;112:864- 70.
2. Kilinc H, Turgut S. Optical behaviors of esthetic CAD-CAM restorations after different surface finishing and polishing procedures and UV aging: An in vitro study. J Prosthet Dent 2018;120:1-7.
3. dos Santos DM, da Silva EVF, Watanabe D, et al. Effect of different acidic solutions on the optical behavior of lithium disilicate ceramics. J Prosthet Dent 2017;118:430-36.
4. Ren YF, Feng L, Serban D, et al. Effects of common beverage colorants on color stability of dental composite resins: the utility of a thermocycling stain challenge model in vitro. J Dent 2012;40:48-56.
5. Villalta P, Lu H, Okte Z, et al. Effects of staining and bleaching on color change of dental composite resins. J Prosthet Dent 2006;95:137-42.
6. Acar O, Yilmaz B, Altintas SH, et al. Color stainability of CAD/ CAM and nanocomposite resin materials. J Prosthetic Dent 2016;115:71-5.
7. Motro PF, Kursoglu P, Kazazoglu E. Effects of different surface treatments on stainability of ceramics. J Prosthet Dent 2012;108:231-7.
8. Vichi A, Fonzar RF, Goracci C, et al. Effect of finishing and polishing on roughness and gloss of lithium disilicate and lithium silicate zirconia reinforced glass ceramic for CAD/ CAM systems. Oper Dent 2018;43:90–100.
9. Fasbinder DJ, Neiva GF. Surface evaluation of polishing techniques for new resilient CAD/CAM restorative materials. J Esthet Restor Dent 2016;28:56-66.
10. Lawson NC, Burgess JO. Gloss and stain resistance of ceramic-polymer CAD/CAM restorative blocks. J Esthet Restor Dent 2016;28:40-5.
11. Ardu S, Braut V, Gutemberg D, et al. A long-term laboratory test on staining susceptibility of esthetic composite resin materials. Quintessence Int 2010;41:695–702.
12. Kuenhi RG, Marcus RT. An experiment in visual scaling of small color differences. Color Res App 1979;4:83-91.
13. Alp G, Subasi MG, Johnston WM, et al. Effect of surface treatments and coffee thermocycling on the color and translucency of CAD-CAM monolithic glass-ceramic. J Prosthet Dent 2018;120:263-68.
14. Kanat-Ertürk B. Color stability of CAD/CAM ceramics prepared with different surface finishing procedures. J Prosthodont 2019, doi: 10.1111/jopr.13019.
15. Palla ES, Kontonasaki E, Kantiranis N, et al. Color stability of lithium disilicate ceramics after aging and immersion in common beverages. J Prosthetic Dent 2017;119:632-42.
16. Karaokutan I, Yilmaz Savas T, Aykent F, et al. Color stability of CAD/CAM fabricated inlays after accelerated artificial aging. J Prosthodont 2016;25:472-7.
17. Gawriolek M, Sikorska E, Ferreira LF, et al. Color and luminescence stability of selected dental materials in vitro. J Prosthodont 2012;21:112-22.
18. Ferracane JL. Hygroscopic and hydrolytic effects in dental polymer networks. Dent Mater 2006;22:211-22.