Tetregonal Zirkonya KAtkılı Cr3C2NiCr Sermet Kompozitlerin Karakterizasyonu ve Mekanik Özellikleri
Sermetler yaygın olarak kesici takım ucu olarak kullanımlarıdır. Buna yönelik ticari markalar da farklı isimler altında patentlenmiş ve kullanıma sunulmuştur. Bu çalışmada, tetragonal zirkonya katkılı Cr3C2Ni(Cr) sermetlerin sinterlenme davranışları ve bu katkıların mekanik özelliklere etkileri incelenmiştir. Sinterlenme davranışlarının belirlenmesi için üç farklı sıcaklıkta kinetik çalışmaları yapılmış ve oluşan fazlar XRD ve SEM ile incelenmiştir. Katkıların mekanik özelliklere etkisini incelemek için elastik modül, sertlik ve kırılma tokluğu deneyleri yapılmıştır. Elde edilen veriler ışığında, sinterleme sıcaklığı 1300°C olarak belirlendi. Elastik modül, sertlik ve kırılma tokluğu değerleri de 1300°C'de yapılan sinterleme sonucunda %2 3Y-TZP katkılı sermette sırasıyla 307 GPa, 10.5 GPa ve 12.1 MPa.√m olarak belirlenmiştir
Characterization and MEchanical Properties of Tetragonal Zirconia Reinforced Cr3C2Ni(Cr) Cermet Composites
Cermets are widely used in cutting tool industry. Commercial brands are also usable under different patents. In this study, the effect of 3Y-TZP reinforcements on the sintering behaviors and mechanical properties of Cr3C2-Ni(Cr) cermets were investigated. Sintering kinetics were studied by sintering at three different temperatures and formed phases were evaluated by XRD and SEM analysis. To investigate the effect of reinforcement on the mechanical properties, the elastic modulus, hardness and fracture toughness experiments were carried out. 1300°C was found as sintering temperature from sintering kinetic studies. Elastic modulus, hardness and fracture toughness values were found as 307 GPa, 10.5 GPa and 12.1 MPa.√m, respectively. © Afyon Kocatepe Üniversitesi
___
- C-D. QIN, B. D. (1993). "Diffusion bonding of a nickel (chromium) alloy to zirconia: mechanical properties and interface microstructures." JOURNAL OF MATERIALS SCIENCE 28 4366-4374.
- Gulgun, M. A., M. H. Nguyen, et al. (1999). "Polymerized organic-inorganic synthesis of mixed oxides." Journal of the American Ceramic Society 82(3): 556-560.
- Kriven, W. M., B. R. Rosczyk, et al. (2003). "Synthesis of mixed conducting oxides by an organic steric entrapment method." 27th International Cocoa Beach Conference on Advanced Ceramics and Composites: A 24(3): 287-292.
- Lee, S. J. and W. M. Kriven (1998). "Preparation of ceramic powders by a solution-polymerization route employing PVA solution." 22nd Annual Conference on Composites, Advanced Ceramics, Materials, and Structures: B 19(4): 469-476.
- Lide, D. R. (1998). Handbook of Chemistry and Physics (87 ed.). Boca Raton, FL, CRC Press.
- Mecholsky, J. J. (1993). "Strength and fracture of glass and ceramics, Glass Science and Technology, Vol. 12. By J. Mencik. Elsevier, Amsterdam 1992, 356 pp., hardcover $ 110.50, ISBN 0-444-98685-5." Advanced Materials 5(3): 224-225.
- Nguyen, M. H., S. J. Lee, et al. (1999). "Synthesis of oxide powders by way of a polymeric steric entrapment precursor route." Journal of Materials Research 14(8): 3417-3426.
- Pastor, H. (2007). Chapter 9: Materials for Cutting, Drilling and Tribology. Ceramic Materials: Processes, Properties and Applications. P. B. J.-C. Niepce, ISTE Ltd.
- Tracey, V. A. (1992). "Nickel in Hardmetals." Refractory Metals & Hard Materials 11 137-149.
- Upadhyaya, G. S. (2001). "Materials science of cemented carbides-an overview." Materials and Design 22: 483- 489.
- Zhang, S. (1993). "Titanium carbonitride-based cermets: processes and properties." Materials Science and Engineering, A 163 141-148.