___

• Liter S.G., Kaviany M., “Pool-boiling CHF
• enhancement by modulated porous-layer coating:
• theory and experiment”, International Journal
• of Heat and Mass Transfer, Cilt 44, 4287–4311,
• -
• İnternet: Türk Toz Metalurjisi Derneği “Toz
• Metalurjisi Üretim Teknikleri” http://www.
• turktoz.gazi.edu.tr/ttmd_tr.htm, 2009.
• Qiao, Y.X., Zheng, Y.G., Okafor, P.C., Ke, W.,
• “Electrochemical behaviour of high nitrogen
• bearing stainless steelin acidic cloride solution:
• Effect of oxygen, acid concentration and surface
• roughness”, Electrochimica Acta., Cilt 54,
• –2304, 2009.
• Sato, S., Enoeda, M., Kuroda, T., Oharo, Y.,
• Mohri, K., Cardella, A., “Characteristic
• evaluation of HIP bonded SS/DSCu joints for
• surface roughness”, Fusion Engineering and
• Design, Cilt 58-59, 749–754, 2001.
• Torikai, Y., Penzhorn, R.D., Matsuyama, M.,
• Watanabe, K., “Tritium uptake by SS316 and its
• decontamination”, Journal of Nuclear
• Materials, Cilt 329-333, 1624–1628, 2004.
• Wang, Y., Northwood, D.O., “An investigation
• into polypyrrole-coated 316L stainless steel as a
• bipolar plate material for PEM fuel cells”,
• Journal of Power Sources., Cilt 163, 500–508,
• -
• Neikov O., Naboychenko S., Mourachova I.,
• Gopienko V.,Frishberg I., Handbook
• Nonferrous Metal Powders: Technologies and
• Applications, Elsevier, Amsterdam, 2009.
• Cora Ö. N., Usta Y., Koç Y., “Micromanufacturing
• of micro-scale porous surface
• structures for enhanced heat transfer applications:
• an experimental process optimization study”
• Journal of Micromechanics and
• Microengineering, pp.1-19, 2009.
• Koç, M, Usta, Y., Karakoç, A., “Investigations on
• thermo-mechanical fabrication of micro-scale
• porous surface features”, Journal of Power
• Sources, Cilt 179, 592–602, 2008.
• Mahabunphachai, S., Koç, M., Ni, J.,
• “Development of a novel process for
• manufacturing of fuel cell bipolar plates: internal
• pressure assisted embossing of microchannels
• with in-die mechanical joining”, 2006 ASME
• International Conference on Manufacturing
• Science and Engineering, MSEC2006-21034,
• Ypsilanti, 1-5, 2006.
• Gu, D., Shen, Y., “Processing conditions and
• microstructural features of porous 316L stainless
• steel components by DMLS-mechanical
• fabrication of micro-scale porous surface
• features”, Applied Surface Science, Cilt 255,
• –1887, 2008.
• Molin, S., Gazda, M., Kusz, B., Jasinski, P.,
• “Evaluation of 316 L porous stainless steel for
• SOFC support”, Journal of the European
• Ceramic Society, Cilt 29, 757–762, 2009.
• İnternet: Hacettepe Üniversitesi “Yakıt
• Hücrelerinin Tarihçesi” http://yunus.hacettepe.
• edu.tr/~yilser/yakitpili.htm, 2010.
• İnternet: University of Denver “The Telegraph
• Line: Batteries” http://mysite.du.edu/~jcalvert/,
• -
• İnternet: The Hebrew University of Jerusalem
• The Institute of Chemistry “Origin of the Electric
• Current: Galvanic Batteries”
• http://chem.ch.huji.ac.il/history/grove.htm, 2010.
• F. Barbir, “PEM Fuel Cells: Theory and
• Practice”, Elsevier, 2005.
• Dündar F., PEM tipi yakıt hücrelerinde
• kullanılan katalizörlerde farklı karbon desteği
• kullanılarak yüzey alanının arttırılması ve
• kinetik özelliklerinin geliştirilmesi, Yüksek
• Lisans Tezi, Gebze Yüksek Teknoloji Enstitüsü
• Mühendislik ve Fen Bilimleri Enstitüsü, Gebze,
• -
• Berning, T., Djilali, N., “Transport Phenomena in
• a PEM Fuel Cell: A Parametric Study Using a
• Three-Dimensional Computational Model
• Transport phenomena in a PEM fuel cell”, 11th
• Canadian Hydrogen Conference, Victoria, 699-
• , 2001.
• İnternet: TMMOB İnşaat Mühendisleri Odası
• “Çimento Tipinin Donatı Korozyonuna Etkisi”
• http://www.e-kutuphane.imo.org.tr/pdf/3157.pdf,
• -
• İnternet: TMMOB Metalurji Mühendisleri Odası
• “AISI 316L Tipi Östenitik Paslanmaz Çeliklerin
• Taneler Arası Korozyona Duyarlılığının
• Elektrokimyasal Polarizasyon Yöntemiyle
• Belirlenmesi” http://www.metalurji.org.tr/dergi/
• dergi140/ d140_5061.pdf, 2010.
• TS 2040 EN ISO 1302, “Geometrik mamul
• özellikleri (GMÖ) – Teknik mamul dokümantasyonunda
• yüzey durumlarının gösterilişi”, Türk
• Standardı, (2005).