___

• Siefert, A., Pankoke, S., ve Wölfel, H.P., “Virtual
• Optimisation of Car Passenger Seats: Simulation
• of Static and Dynamic Effects on Drivers’
• Seating Comfort”, International Journal of
• Industrial Ergonomics, 38, 410-424, 2008.
• Karabulut, H., Öztürk, E., Çınar, C., “Dynamic
• Modeling and Investigation of Vibrations of a
• Single Cylinder Four-Stroke Diesel Engine”, J.
• Fac. Eng, Arch. Gazi Univ., Cilt 26, No 1, 173-
• , 2011.
• Taylor, C.F., The Internal Combustion Engine
• in Theory and Practice Vol. II: Combustion,
• Fuels, Materials, Design 2nd ed., The M.I.T.
• Pres, 1985.
• Boysal, A. ve Rahnejat, H., “A Torsional
• Vibration Analysis of a Multi-Body Single
• Cylinder Internal Combustion Engine Model”,
• Applied Mathematical Modelling, Cilt 21, 481-
• , 1997.
• Brusa, E., Delprete, C. ve Genta, G., “Torsional
• Vibration of Crankshafts: Effects of Non-constant
• Moments of Inertia”, Journal of Sound and
• Vibration, 205(2), 135-150, 1997.
• Drew, S.J., Hesterman, D.C. ve Stone, B.J., “ The
• Torsional Excitation of Variable Inertia Effects in
• A Reciprocating Engine”, Mechanical Systems
• and Signal Processing, Cilt 13, No 1, 125-144,
• -
• Metallidis P. ve Natiavas S., “Linear and
• Nonlinear Dynamics of Reciprocating Engines”,
• International Journal of Non-Linear
• Mechanics, Cilt 38, 723-738, 2003.
• Pasricha, M.S. ve Hashim, F.M., “Effect of the
• Reciprocating Mass of Slider Crank Mechanism
• on Torsional Vibrations of Diesel Engine
• Systems”, Asean Journal on Science and
• Technology for Development, Cilt 23, No 1, 71-
• , 2006.
• Goudas, I. ve Natsiavas, S., “Non-linear
• Dynamics of Engine Mechanism with a Flexible
• Connecting Rod”, Proceedings of the
• Institution of Mechanical Engineers, Part K:
• Journal of Multi-body Dynamics, Cilt 218, 67-
• , 2004.
• Wauer, J. ve Bührle, P., “Dynamics of a Flexible
• Slider-crank Mechanism Driven by a Non-ideal
• Source of Energy”, Nonlinear Dynamics, Cilt
• , 221-242, 1997.
• Suh, C.H. ve Smith, C.G., “Dynamics Simulation
• of Engine Mount Systems”, Society of
• Automotive Engineers Inc., SAE-971940, 561-
• , 1997.
• Wang, R., A Study of Vibration Isolation of
• Engine Mount System, MsD Thesis, Concordia
• University, The Department of Mechanical and
• Industrial Engineering, 2005.
• Tao, J.S., Liui, G.R. ve Lam, K.Y., “Design
• Optimization of Marine Engine Mount System”,
• Journal of Sound and Vibration, Cilt 235, No
• , 477-494, 2000.
• Kim, J.H. ve Lee, J.M., “Elastic Foundation
• Effects on The Dynamic Response of Engine
• Mount Systems”, Proc. Instn. Mech. Engrs Part
• D: J Automobile Engineering, Vol. 214, 45-53,
• -
• Hoffman, D.M.W. ve Dowling, D.R., “Modeling
• Fully Coupled Rigid Engine Dynamics and
• Vibrations,” 1999 SAE Noise and Vibrations
• Conference, Vol. 2, Traverse City, MI,
• Warrendale, PA, 747–755 1999.
• Hadi, R., The Identification of The Inertial
• Characteristics of An ICE Through Steady
• State Vibration Measurement, PhD. Thesis,
• Wayne State University, Mechanical
• Engineering, 2002.
• Hoffmann, D.M.W. ve Dowling, D.R., “Fully
• Coupled Rigid Internal Combustion Engine
• Dynamics and Vibration: Part I Model
• Development”, Journal of Engineering for Gas
• Turbines and Power, Cilt 123, 677-684, 2001.
• Rideout, D.G., Stein, J.L. ve Louca, L.S.,
• “Systematic Assessment of Rigid Internal
• Combustion Engine Dynamic Coupling”, Journal of Engineering for Gas Tubines and
• Power, Cilt 130, 1-12, 2008.
• Hesterman, D.C. ve Stone, B.J., “A Systems
• Approach to the Torsional Vibration of Multi
• Cylinder Reciprocating Engines and Pumps”,
• Proceedings of the Institution of Mechanical
• Engineers, Part C: Journal of Mechanical
• Engineering Science, Cilt 208, 395-408, 1994.
• Zweiri, Y.H., Whildborne, J.F. ve Seneviratne,
• L.D., “Detailed Analytical Model of A Single-
• Cylinder Diesel Engine in The Crank Angle
• Domain”, Proceedings of the Institution of
• Mechanical Engineers, Part D: Journal of
• Automobile Engineering, Cilt 215, 1197-1216,
• -
• Guzzomi, A.L., Hesterman, D.C. ve Stone, B.J.,
• ‘The Effect of Piston Friction on Engine Block
• Dynamics’, Proceedings of the Institution of
• Mechanical Engineers, Part K: Journal of
• Multi Body Dynamics, Cilt 221, 277-289, 2007.
• Rezeka, S.F., A Mathematical Model of
• Reciprocating Combustion Engine Dynamics
• for The Diagnosis of Deficient Energy
• Conversion, PhD. Thesis, Wayne State
• University, Mechanical Engineering, 1984.
• Patil, A.B. ve Ranade, N.S., “Computer
• Simulation of an I.C. Engine During Cranking by
• a Starter Motor”, SAE International:
• International Congres and Exposition,
• Michigan, SAE-930626, 89-95, 1993.
• Karaçay, T., Eroğlu, M., Aktürk, N., “An
• Investigation Into Ride Characteristics of Two
• Degree of Freedom System Quarter Car Moving
• on a Rough Surface”, J. Fac. Eng, Arch. Gazi
• Univ., Cilt 18, No 4, 1-13, 2003.
• Choi, S.B. ve Song, H.J., “Vibration Control of a
• Passenger Vehicle Utilizing a Semi-active ER
• Engine Mount”, Vehicle System Dynamics,
• (3), 193-216 (2002).
• Foumani, M.S., Khajepour, A. ve Durali, M.,
• “Optimization of Engine Mount Characteristics
• Using Experimental/Numerical Analysis”,
• Journal of Vibration and Control, 9, 1121-
• , 2003.
• Hillis, A., J., Harrison, A.J.L. ve Stoten, D.P., “A
• Comparision of Two Adaptive Algoritms for The
• Control of Active Engine Mounts”, Journal of
• Sound and Vibration, Cilt 286, 37-54, 2005.
• Jazar, G.N., Houim, R., Narimani, A. ve
• Golnaraghi, M.F., “Frequency Response and
• Jump Avoidance in A Nonlinear Passive Engine
• Mount”, Journal of Vibration and Control, Cilt
• , No 11, 1205-1237, 2006.
• Golnaraghi, M.F. ve Jazar, G.N., “Development
• and Analysis of a Simplified Nonlinear Model of
• Hydrolic Engine Mount”, Journal of Vibration
• and Control, 7, 495-526 2001.
• Christopherson, J. ve Jazar, G.N., “Dynamics
• Behaviour Comparision of Passive Hydrolic
• engine Mounts, Part 1: Mathematical Analysis”,
• Journal of Sound and Vibration, Cilt 290,
• -1070, 2006.
• Lee, Y.W. Ave Lee, C.W., “Dynamic Analysis
• and Control of an Active Engine Mount System”,
• Proc. Instn. Mech. Engrs. Part D: J
• Automobile Engineering, Vol. 216, 921-931,
• -
• Hoffmann, D.M.W., In-line internal
• combustion engine dynamics and vibration,
• Ph. D. Thesis, The University of Michigan, 1999.
• Palavan, S., Pistonlu Makinalar Dinamiği,
• İ.T.Ü. Makine Fakültesi Ofset Atölyesi, 36-45,
• -
• Karabulut, H., “Dynamic model of a two-cylinder
• four-stroke internal combustion engine and
• vibration treatment”, Int. J of Engine Research,
• doi:10.1177/1468087412442618.
• Öztürk, E., İçten yanmalı motorlarda
• titreşimlerin incelenmesi, Doktora Tezi, Gazi
• Üniversitesi Fen Bilimleri Enstitüsü, 2011.