Al2O3 İLAVESİNİN ALÜMİNYUM ve ALUMİX 231 ESASLI METALİK KÖPÜĞÜN KÖPÜRME ÖZELLİKLERİNE ETKİSİ
Yapılan çalışmada, toz metalurjisi yöntemi ile saf alüminyum ve ön alaşımlı Alumix 231 (Al-Cu %2,5-Mg%0,5–Si %14) esaslı Al2O3 parçacık takviyeli kompozit köpükler üretilmiştir. Al ve Alumix 231 tozları ile % 1oranında titanyum hidrür tozları ve % 1-3-5-7 oranlarında Al2O3 parçacıkları üç boyutlu karıştırıcıdakarıştırılmıştır. Karışım tozlar kalıp içerisinde 600 MPa basınç altında preslenerek blok numuneler halinegetirilmiştir. Elde edilen blok numuneler fırın içerisinde 550 ºC sıcaklıkta 3 saat ön ısıtmaya ve aynı zamanda dasinterlemeye tabii tutulmuş ve numunelere daha sonra 690 ve 710° C sıcaklıkta köpürtme işlemi yapılmıştır.Köpürtme işlemi sonrasında numuneler fırından alınarak atmosfer ortamında soğutulmuştur. Elde edilen köpüknumunelerde Al2O3 ilavesinin lineer genleşme, parça yoğunluğu ve gözenek boyutuna etkileri araştırılmıştır.
___
- Gui M.C., Wang D.B., Wu J.J., Yuan G.J., Li
- C.G., “Deformation and damping behaviors of
- foamed Al-Si-SiCp composite”, Materials
- Science and Engineering, A286:282-288, 2000.
- Banhart J., “Manufacture, characterisation and
- application of cellular metals and metal foams”,
- Progress in Materials Science, 46: 559-632,
- -
- Feng Y., Zheng H., Zhu Z., Zu F., “The
- Microstructure and electrical conductivity of
- aluminium alloy foams”, Material Chemistry
- and Physics, 78: 196-201, 2002.
- Banhart J., “Aluminium Foams: On the Road to
- Real Applications”, Materials Research Society
- Bulletin, 290-295, 2003.
- Hanssen, A.G., Langseth, M., Hopperstad,
- O.S.,”Optimum design for energy absorption of
- square aluminium columns with aluminium foam
- filler”, International Journal of Mechanical
- Sciences, 43:153-158, 2001.
- Song, H.W., Fan, Z.H., Yu, G., Wang, Q.C.,
- “Partition energy absorption of axially crushed
- aluminum foam-filled hat sections”,
- International Journal of Solids and Structures,
- :2575 – 2583, 2005.
- Crupi, V., Montanini, R., ”Aluminium foam
- sandwiches collapse modes under static and
- dynamic three-point bending”, International
- Journal of Impact Engineering, 34:509-517,
- -
- Seitzberger, M., Rammerstorger, F.G., Degischer,
- H.P., “Crushing of axially compressed steel tubes
- filled with aluminium foam”, Acta Mechanica,
- : 95-103, 1997.
- Bostan, B., “Mekanik alaşımlama ve ekstrüzyon
- sonrası Al4C3 oluşumunun incelenmesi”, J. Fac.
- Eng. Arch. Gazi Univ., Vol 23, No 2, 343-348,
- -
- Hanssen A.G., Langseth, M., Happerstad, O.S.,
- “Static and dynamic crushing of circular
- aluminium extrusions with aluminium foam
- filler”, Int. J. of Impact Eng., 24 (5): 475-507,
- -
- Amjad, S., “Thermal Conductivity and Noise
- Attenuation in Aluminium Foams”,
- Adissertation submitted for the degree of
- Master of Philosophy in Materials Modelling
- at the University of Cambridge, 3-7, 2001.
- Çinici H., Türker M., “TM Yöntemi İle Üretilen
- Alüminyum Esaslı Metalik Köpüğe Deformasyon
- Miktarının Etkilerinin Araştırılması”, 13. Uluslar
- arası Metalürji ve Malzeme Kongresi, İstanbul
- – Türkiye, 854-860, 2006.
- Babcsán N., Leitlmeier D., Degischer H.P.,
- “Foamability of Particle Reinforced Aluminum
- Melt”, Mat.-wiss. u. Werkstofftech., 34: 22-29,
- -
- Liu, J., Yu, S., Zhu, X., Wei, M., Li, S., Luo, Y.,
- Liu, Y., “Effect of Al2O3 short fiber on the
- compressive properties of Zn-22Al foams”,
- Materials Letters, 62:3636-3638, 2008.
- Haesche, M., Weise, J., Moreno, F., Banhart, J.,
- “Influence of particle additions on the foaming
- behaviour of AlSi 11/ TiH2 composites made by
- semi-solid processing”, Materials Science
- Engineering A, 480:283-288, 2008.
- Uzun, A., Gökmen, U., Türker, M., ‘‘Toz
- Metalurjisi Yöntemi İle Üretilen Alüminyum
- Esaslı Metalik Köpükte Si İlavesinin Köpürmeye
- Etkisi’’, 5th International Advanced
- Technologies Symposium (IATS’09), 1003-
- , Karabük, Turkey, 2009.
- Helwing, H. M., Hiller, S., Garcia-Moreno, F.,
- Banhart, J., “Influence of Compaction Conditions
- on the Foamability of AlSi8Mg4 Alloy”,
- Metallurgical and Materials Transactions B,
- Volume 40, Number 5, 755-767, 2009.
- Kim, H.Y., Park, S.Y., Hur, B.Y., Lee, S.W.,
- “Rheology Characteristics of Al-Si Alloy and Mg
- Alloy for Metal Foam Manufacturing”,
- Materials Science Forum, 464-467, 2005.
- Esmaeelzadeh, S., Simchi, A., ‘‘Foamability and
- compressive properties of AlSi7–3 vol.% SiC–0.5
- wt.% TiH2 powder compact’’, Materials Letters,
- :1561–1564, 2008.