___

• Aslanlar, S., “The effect of nucleus size on
• mechanical properties in electrical resistance
• spot welding of sheets used in automotive
• industry”, Materials and Design, 27(2): 125-
• , 2006.
• Aslanlar, S., Ogur, A., Ozsarac, U. ve Ilhan, E.,
• “Welding time effect on mechanical properties
• of automotive sheets in electrical resistance spot
• welding”, Materials and Design, 29(7): 1427-
• , 2008.
• Uematsu, Y., Tokaji, K., Tozaki, Y., Kurita, T.
• ve Murata, S., “Effect of refilling probe hole on
• tensile failure and fatigue behavior of friction
• stir spot welded joints in Al-Mg-Si alloy”,
• International Journal of Fatigue, 30(10-11):
• -1966, 2008.
• Chae, S. W., Kwon, K. Y. ve Lee, T. S., “An
• optimal design system for spot welding
• locations”, Finite Elements in Analysis and
• Design, 38(3): 277-294, 2002.
• Buffa, G., Fratini, L. ve Piacentini, M., “On the
• influence of tool path in friction stir spot
• welding of aluminum alloys”, Journal of
• Materials Processing Technology, 208(1-3):
• -317, 2008.
• Rogeon, P., Carre, P., Costa, J., Sibilia, G. ve
• Saindrenan, G., “Characterization of electrical
• contact conditions in spot welding assemblies”,
• Journal of Materials Processing Technology,
• (1-3): 117-124, 2008.
• Anık, S., Ogur, A., Vural, M. ve Turan, H.,
• “Direnç nokta kaynak elektrodu ömrünün
• deneysel analizi”, Mühendis ve Makina, (513):
• -
• Lathabai, S., Painter, M. J., Cantin, G. M. D. ve
• Tyagi, V. K., “Friction spot joining of an
• extruded Al-Mg-Si alloy”, Scripta Materialia,
• (10): 899-902, 2006.
• Kim, D. C., Park, H. J., Hwang, I. S. ve Kang,
• M. J., “Resistance spot welding of aluminum
• alloy sheet 5J32 using SCR type and inverter
• type power supplies”, Archives of Materials
• Science and Engineering, 38(1): 55-60, 2009.
• Badarinarayan, H., Yang, Q. ve Zhu, S., “Effect
• of tool geometry on static strength of friction stir
• spot-welded aluminum alloy”, International
• Journal of Machine Tools & Manufacture,
• (2): 142-148, 2009.
• Tran, V. X., Pan, J. ve Pan, T., “Effects of
• processing time on strength and failure modes of
• dissimilar spot friction welds between aluminum 5754-O and 7075-T6 sheets”, Journal of
• Materials Processing Technology, 209(8):
• -3739, 2009.
• Lin, P. C., Pan, J. ve Pan, T., “Failure modes and
• fatigue life estimations of spot friction welds in
• lap-shear specimens of aluminum 6111-T4
• sheets. Part 1: Welds made by a concave tool”,
• International Journal of Fatigue, 30(1): 74-89,
• -
• P. C., Pan, J. ve Pan, T., “Failure modes and
• fatigue life estimations of spot friction welds in
• lap-shear specimens of aluminum 6111-T4
• sheets. Part 2: Welds made by a flat tool”,
• International Journal of Fatigue, 30(1): 90-
• , 2008.
• Tran, V. X., Pan, J. ve Pan, T., “Fatigue
• behavior of aluminum 5754-O and 6111-T4 spot
• friction welds in lap-shear specimens”,
• International Journal of Fatigue, 30(12):
• -2190, 2008.
• Wang, D. A. ve Chen, C. H., “Fatigue lives of
• friction stir spot welds in aluminum 6061-T6
• sheets”, Journal of Materials Processing
• Technology, 209(1): 367-375, 2009.
• Gerlich, A. P. ve Shibayanagi, T., “Grain
• boundary sliding during friction stir spot
• welding of an aluminum alloy”, Scripta
• Materialia, 60(4): 236-239, 2009.
• Wang, D. A. ve Lee, S. C., “Microstructure and
• failure mechanisms of friction stir spot welds of
• aluminum 6061-T6 sheets”, Journal of
• Materials Processing Technology, 186(1-3):
• -297, 2007.
• Arul, S. G., Pan, T., Lin, P. C., Pan, J., Feng, Z.
• ve Santella, M. L., “Microstructures and failure
• mechanisms of spot friction welds in lap-shear
• specimens of aluminum 5754 sheets”, Society of
• Automotive Engineers, 1256: 2005.
• Senyen, C., “Alüminyum alaşımlarının
• kaynağında dikkat edilecek hususlar”, Kaynak
• Teknolojisi III. Ulusal Kongresi Bildiriler
• Kitabı, 253–265, 2001.
• Gerlich, A., Su, P. ve North, T. H., “Tool
• penetration during friction stir spot welding of
• Al and Mg alloys”, Journal of Materials
• Science, 40: 6473-6481, 2005.
• Feng, Z. ve Eberhardt, J. J., “Friction stir
• welding and processing of advanced materials”,
• High Strength Weight Reduction Materials
• Progress Report, 122 134, 2005.
• Külekci, M. K. ve Sık, A., “Effects of tool
• rotation and transverse speed on fatigue
• properties of friction stir welded AA 1050-H18
• aluminium alloy”, Archives of Metallurgy and
• Materials, 51(2): 213-216, 2006.
• Külekci, M. K., Sık, A. ve Kaluç, E., “Effects of
• tool rotation and pin diameter on fatigue
• properties of friction stir welded lap joints”, The
• International Journal of Advanced
• Manufacturing Technology, 36(9-10): 877-
• , 2006.
• Öcalır, Ş., Sürtünme Karıştırma Kaynağı ile
• Yapılan Alüminyum Alaşımı Birleştirmelerde
• Optimum Parametrelerin Belirlenmesi,
• Master, Mersin Üniversitesi, Fen Bilimleri
• Enstitüsü, 2009.
• Kahraman, B., Otomotiv Endüstrisinde
• Kullanılan 5754 Alüminyum Alaşımı Sacların
• Direnç Nokta Kaynağı(RSW) ve Sürtünme
• Karıştırma Nokta Kaynağı(FSSW)
• Yöntemleri ile Birleştirilmesi, Master, Kocaeli
• Üniversitesi, Fen Bilimleri Enstitüsü, 2009.
• Kaluç, E. ve Taban, E., Sürtünen Eleman İle
• Kaynak (FSW) Yöntemi, MMO/2007/460,
• Ankara, 2007.
• Çam, G., Güçlüer, S., Çakan, A. ve Serindağ, H.
• T., “Mechanical properties of friction stir buttwelded
• Al-5086 H32 plate”, Mat.-Wiss. U.
• Werkstofftech, 40(8): 638-642, 2009.
• Çam, G., “Sürtünme karıştırma kaynağı (SKK):
• Al alaşımları için geliştirilmiş yeni bir kaynak
• teknolojisi”, Mühendis ve Makine, (541): 2005.
• Canyılmaz, E. ve Kutay, F., “An alternative
• approach to analysis of variance in Taguchi
• Method”, Journal of The Faculty of
• Engineering and Architecture of Gazi
• University, 18(3): 51-63, 2003.
• Hamzaçebi, Ç. ve Kutay, F., “Taguchi metodu:
• Bir uygulama”, Teknoloji, 6(3-4): 7-17, 2003.
• Gökçe, B. ve Taşgetiren, S., “Kalite için deney
• tasarımı”, Makine Teknolojileri Elektronik
• Dergisi, 6(1): 71-83, 2009.
• Şirvancı, M., Kalite İçin Deney Tasarımı:
• Taguchi Yaklaşımı, Literatür Yayınları,
• İstanbul, Türkiye, 1997.
• Mitlin, D., Radmilovic, V., Pan, T., Chen, J.,
• Feng, Z. Ve Santella, M. L., “Structureproperties
• relations in spot friction welded (also
• known as friction stir spot welded) 6111
• aluminum”, Materials Science and
• Engineering A, 441(1-2): 79-96, 2006.