Heuristic algorithm-based estimation of rotor resistance of an induction machine by slot parameters with experimental veri cation

The estimations of induction machine equivalent circuit parameters are still being widely used in the analysis and in determining the characteristics of the machine. Since the most important part of the machine is the rotor where torque is produced, the calculation of rotor resistance correctly will directly affect all other data. Almost all parameters belonging to the stator side can easily be determined through external measurements. However, due to the formulation of the rotor as a closed box, estimating rotor resistance and the rotor's slot shape by heuristic algorithms, without damaging the rotor physically, and comparing it with its actual value constitutes the rst focus of this study. In this regard, rotor resistance and slot parameters are estimated through heuristic algorithms depending on the induction machine design aspects. Secondly, an improved particle swarm optimization is presented and compared with conventional PSO and genetic algorithm.

PDF

___

[1] Was M, Krzeminski Z, Toryat HA. Neural-network-based parameter estimations of induction motors. IEEE T Ind Electron 2008; 55: 1783-1794.
[2] Maitre J, Gaboury S, Bouchard B, Bouzouane A. An effective identi cation of the induction machine parameters using a classic genetic algorithm, NSGAII and -NSGA III. In: 2015 6th International Conference on Information, Intelligence, Systems and Applications; 2015. pp. 1-6.
[3] Kampisios K, Zanchetta P, Geraga C, Trentin A, Jasim O. Induction motor parameters identi cation using genetic algorithm for varying ux levels. In: 2008 13th Power Electrinics and Motion Control Conference, 2008. pp. 887-892.
[4] Kwon C, Sudhoff D. Genetic algorithm-based induction machine characterization procedure with application to maximum torgue per amp control. IEEE T Energy Conv 2006; 21: 405-415.
[5] Raie A, Rastchi V. Accurate identi cation of parameters, in winding function model of induction motor, using genetic algorthm. In:2002 Proceedings of the 41st SICE Annual Conference, 2002. pp. 2430-2434.
[6] Huynh DC, Dunnigan MW. Parameter estimation of an induction machine using advanced particle swarm opti- mization algorithms. IET Elec Power Appl 2010; 4: 748-760.
[7] Huynh DC, Dunnigan MW. Parameter estimation of an induction machine using a dynamic particle swarm opti- mization algorithms. In: 2010 IEEE International Symposium on Industrial Electronics, 2010. pp. 1414-1419.
[8] Huynh DC, Dunnigan MW. Parameter estimation of an induction machine using a chaos particle swarm optimisation algorithms. In: 2010 5th IET International Conference on Power Electronics, Machines and Drives, 2010. pp. 1-6.
[9] Ojaghi M, Daliri S. A detailed dynamic model for single-phase shaded pole induction motors. In: 2015 18th International Conference on Electrical Machines and Systems, 2015. pp. 1987-1992.
[10] Riveros JA, Reina DG, Barrero F, Toral SL, Duran MJ. Five-phase induction machine parameter identi cation using PSO and standstill techniques. In: 2015 Industrial Electronics Society, 41st Annual Conference of the IEEE, 2015. pp. 613-618.
[11] Grewal GS, Rajpurohit BS. Induction machine efficiency estimation using population based algorithm. In: 2014 IEEE 6th India International Conference on Power Electronics, 2014. pp. 1-6.
[12] Yous L, Bouchemha A, Bechouat M, Boukrouche A. Induction machine parameter identi cation: a comparison between GAs and PSO approaches. In: 2013 8th International Conference and Exhibition on Ecological Vehicles and Renewable Energies; 2013. pp. 1-5.
[13] To ghi EM, Mahdizadeh A, Feyzi MR. Online estimation of induction motor parameters using a modi ed particle swarm optimization technique. In: 2013 Industrial Electronics Society, 39th Annual Conference, 2013. pp. 3645-3650.
[14] Ramya AS, Raja P. Estimation and performance evalution of an induction machine using optimization techniques. In: 2012 IEEE International Conference on Power Electronics, Drives and Energy Systems, 2012. pp. 1-6.
[15] Telford D, Dunnigan MW, Williams BW. Online identi cation of induction machine electrical parameters for vector control loop tuning. IEEE T Ind Electron 2003; 50: 253-261.
[16] Huang KS, Wu QH, Turner DR. Effective identi cation of induction motor parameters based on fewer measurements. IEEE T Energy Conv 2002; 17: 55-60.
[17] Faiz J, Shari an MBB. Different techniques for real time estimation of an induction motor rotor resistance in sensorless direct torque control for electric vehicle. IEEE T Energy Conv 2001; 16: 104-109.
[18] Duan F, Zivanovic R, Al-savari S, Mba D. Induction motor parameter estimation using sparse grid optimization algorithm. IEEE T Ind Info 2016. pp. 1-1.
[19] Uphues A, Notzold K, Wegener R, Soter S. Comparison of parameter identi cation approaches with linearised process models based on PLS for induction machine with P > 100kW. In: 2016 IEEE International Conference on Industrial Technology, 2016. pp. 134-140.
[20] Tekgun B, Sozer Y, Tsukerman I. Modeling and parameter estimation of split-phase induction motors. IEEE T Ind Appl 2016; 52: 1431-1440.
[21] Lee SB, Habetler TG, Harley RG, Gritter DJ. A stator and rotor resistance estimation technique for conductor temperature monitoring. IEEE Ind Appl 2000; 1: 381-387.
[22] Boglietti A, Cavagnino A, Lazzari M. Computational algorithms for induction-motor equivalent circuit parameter determination-part I: resistances and leakage reactances. IEEE T Ind Electron 2011; 58: 3723-3733.
[23] Boglietti A, Cavagnino A, Lazzari M. Computational algorithms for induction motor equivalent circuit parameter determination-part II: skin effect and magnetizing characteristics. IEEE T Ind Electron 2011; 58: 3734-3740.
[24] Lee SJ, Kim JM, An DK, Hong JP. Equivalent circuit considering the harmonics of core loss in the squirrel-cage induction motor for electrical power steering application. IEEE T Magn 2014; 50.
[25] Pedra J, Sainz L. Parameter estimation of squirrel-cage induction motors without torque measurements. Iee Proce- Elec Power Appl 2006; 153: 263-270.
[26] Zhou P, Gilmore J, Badics Z, Cendes ZJ. Finite element analysis of induction motors based on computing detailed equivalent circuit parameters. IEEE T Magn 1998; 34: 3499-3502.
[27] Lin WM, Su TJ, Wu RC. Parameter identi cation of induction machine with a starting no-load low-voltage test. IEEE T Ind Electron 2012; 59: 352-360.
[28] Campos-Delgado DU, Arce-Santana ER, Espinoza-Trejo DR. Edge optimisation for parameter identi cation of induction motors. IET Elec Power Appl 2011; 5: 668-675.
[29] Repo AK, Rasilo P, Arkkio A. Dynamic electromagnetic torque model and parameter estimation for a deep-bar induction machine. IET Elec Power Appl 2008; 2: 183-192.
[30] Castaldi P, Tilli A. Parameter estimation of induction motor at standstill with magnetic ux monitoring. IEEE T Contr Syst T 2005; 13: 386-400.
[31] Derdiyok A. Simple method for speed and rotor resistance estimation of induction machines. IEE Proce-Elec Power Appl 2003; 150: 289-294.
[32] Boduroglu, T. The Lessons of Electric Machinery, Transformers. _ Istanbul, Turkey: Beta, 1988