Experimental realization of a multi-input buck–boost DC–DC converter

In this paper, steady and dynamic performance of a multi-input buck–boost DC–DC converter is presented. The converter has the ability to supply energy from storage and renewable energy sources individually to the load. It maintains a constant output voltage under various transient conditions of load as well as source. It has the capability to operate in buck, boost, and buck–boost modes of operation. The mathematical model of the converter is developed, which is further used to design controllers for the converter. A laboratory prototype is developed for experimental realization of the converter. The analysis, design, simulation, and experimental results of the converter prove that it is suitable in hybrid electric or renewable energy systems application.

PDF

___

Kondrath N, Kazimierczuk M. Unified model to derive control-to-output transfer function of peak current-modecontrolled pulse-width modulated DC-DC converters in continuous conduction mode. IET Power Electron 2012; 5:1706-1713.
Mohan N, Undeland T, Robbins W. Power Electronics: Converters, Applications and Design. 3rd ed. New York,NY, USA: Wiley, 2007.
Chen J, Shen P, Hwang Y. A high efficiency positive buck boost converter with mode-select circuit and feed forward techniques. IEEE T Power Electr 2013; 28: 4240-4247.
Wang Y, Liu W, Ma H, Chen L. Resonance analysis and soft switching design of isolated boost converter with coupled inductors for vehicle inverter application. IEEE T Power Electr 2015; 30: 1383-1392.
Hong J, Lee H, Nam K. Charging method for the secondary battery in dual-inverter drive systems for electric vehicles. IEEE T Power Electr 2015; 30: 909-921.
Rahman A, Razak A, Hassan S. A conceptual implementation of a buck converter for an off-grid hybrid system consisting of solar and wind turbine sources. Turk J Elec Eng & Comp Sci 2016; 24: 3782-3791.
Laldin O, Moshirvaziri M, Trescases O. Predictive algorithm for optimizing power flow in hybrid ultracapacitor/battery storage systems for light electric vehicles. IEEE T Power Electr 2013; 28: 3882-3895.
Yang D, Yang M, Ruan X. One-cycle control for double-input dc/dc converter. IEEE T Power Electr 2012; 27:4646-4655.
Wang Q, Zhang J, Ruan X, Jin K. Isolated single primary winding multiple-input converters. IEEE T Power Electr 2011; 26: 3435-3442.
Ouyang Z, Zhang Z, Andersen M, Thomsen OC. Four quadrants integrated transformers for dual-input isolated dc–dc converters. IEEE T Power Electr 2012; 27: 2697-2702.
Nejabatkhah F, Danyali S, Hosseini S, Sabahi M, Niapour S. Modeling and control of a new three-input dc–dc boost converter for hybrid pv/fc/battery power system. IEEE T Power Electr 2012; 27: 2309-2324.
Wu H, Zhang J, Xing Y. A family of multi-port buck-boost converters based on dc link inductors (DLIs). IEEE T Power Electr 2015; 30: 735-746.
Yuan Y, Cheng K. Multi-input voltage-summation converter based on switched-capacitor. IET Power Electron 2013; 6: 1909-1916.
Wai R, Lin C, Liaw J, Chang Y. Newly designed zvs multi-input converter. IEEE T Ind Electron 2011; 58: 555-566.
Danyali S, Hosseini S, Gharehpetian G. New extendable single stage multi-input dc–dc/ac boost converter. IEEE T Power Electr 2014; 29: 775-788.
Dusmez S,Li X, Akin B. A new multi input three-level dc/dc converter. IEEE T Power Electr 2016; 31: 1230-1240.
Li W, Xu C, Luo H, Hu Y, He X, Xia C. Decoupling-controlled triport composited dc/dc converter for multiple energy interface. IEEE T Ind Electron 2015; 62: 4504-4513.
Liu F, Wang Z, Mao Y, Ruan X. Asymmetrical half-bridge double-input dc/dc converters adopting pulsating voltage source cells for low power applications. IEEE T Power Electr 2014; 29: 4741-4751.
Kumar L, Jain S. Multiple-input DC/DC converter topology for hybrid energy system. IET Power Electron 2013; 6: 1483-1501.
Ahmadi R, Ferdowsi M. Double-input converters based on h-bridge cells: derivation, small-signal modeling, and power sharing analysis. IEEE T Circuits Syst 2012; 59: 875-888.
Jiang W, Fahimi B. Multiport power electronic interface — concept, modeling, and design. IEEE T Power Electr 2011; 26: 1890-1900.
Onar O, Khaligh A. A novel integrated magnetic structure based dc/dc converter for hybrid battery/ultracapacitor energy storage systems. IEEE T Smart Grid 2012; 3: 296-307.