A fabrication-oriented remeshing method for auxetic pattern extraction
A fabrication-oriented remeshing method for auxetic pattern extraction
We propose a method for extracting auxetic patterns from meshes for fabrication by modifying the existingmesh primitives directly and fully automatically. This direct approach is novel in the sense that most of the fabricationoriented surface tiling methods introduce additional primitives, such as curve networks in an interactive semiautomaticframework. Our method is based on a remeshing procedure that converts a given quad mesh with arbitrary topologyinto our desired structure that is ready to be fabricated. The main advantages of establishing auxetic patterns onmeshes are the achieved flexibility using cheap inflexible materials as well as less material usage and fabrication time, asdemonstrated in our results.
___
- [1] Gao W, Zhang Y, Ramanujan D, Ramani K, Chen Y et al. The status, challenges, and future of additive manufacturing in engineering. Computer-Aided Design 2015; 69: 65–89.
- [2] Ma C, Wei LY, Tong X. Discrete element textures. ACM Transactions on Graphics 2011; 30 (4): 62.
- [3] Praun E, Finkelstein A, Hoppe H. Lapped textures. In: Proceedings of the 27th Annual Conference on Computer
Graphics and Interactive Techniques; New Orleans, LA, USA; 2000. pp. 465–470.
- [4] Lefebvre S, Hoppe H. Appearance-space texture synthesis. ACM Transactions on Graphics 2006; 25 (3): 541–548.
- [5] Zhou K, Huang X, Wang X, Tong Y, Desbrun M et al. Mesh quilting for geometric texture synthesis. ACM
Transactions on Graphics 2006; 25 (3): 690–697.
- [6] Garg A, Sageman-Furnas AO, Deng B, Yue Y, Grinspun E et al. Wire mesh design. ACM Transactions on Graphics
2014; 33 (4): 66–1.
- [7] Torres C, Campbell T, Kumar N, Paulos E. Hapticprint: Designing feel aesthetics for digital fabrication. In:
Proceedings of the 28th Annual ACM Symposium on User Interface Software and Technology; Charlotte, NC,
USA; 2015. pp. 583–591.
- [8] Dumas J, Lu A, Lefebvre S, Wu J, Dick C. By-example synthesis of structurally sound patterns. ACM Transactions
on Graphics 2015; 34 (4): 137.
- [9] Chen W, Zhang X, Xin S, Xia Y, Lefebvre S et al. Synthesis of filigrees for digital fabrication. ACM Transactions
on Graphics 2016; 35 (4): 98.
- [10] Schumacher C, Thomaszewski B, Gross M. Stenciling: Designing structurally-sound surfaces with decorative
patterns. In: Benes B, Chen M (editors). Computer Graphics Forum. Volume 35. New York, NY, USA: The
Eurographics Association and John Wiley & Sons Ltd, 2016, pp. 101–110.
- [11] Zehnder J, Coros S, Thomaszewski B. Designing structurally-sound ornamental curve networks. ACM Transactions
on Graphics 2016; 35 (4): 99.
- [12] Zhao H, Gu F, Huang QX, Garcia J, Chen Y et al. Connected fermat spirals for layered fabrication. ACM
Transactions on Graphics 2016; 35 (4): 100.
- [13] Jacobson A, Baran I, Kavan L, Popović J, Sorkine O. Fast automatic skinning transformations. ACM Transactions
on Graphics 2011; 31 (4): 77.
- [14] Sahillioglu Y, Yemez Y. Minimum-distortion isometric shape correspondence using EM algorithm. IEEE Transactions on Pattern Analysis and Machine Intelligence 2012; 34 (11): 2203–2215.
- [15] Spillmann J, Teschner M. Cosserat nets. IEEE Transactions on Visualization and Computer Graphics 2009; 15 (2): 325–338.
- 16] Wolff K, Poranne R, Glauser O, Sorkine-Hornung O. Packable springs. Computer Graphics Forum 2018; 37 (2): 251-262.
- [17] Perez J, Thomaszewski B, Coros S, Bickel B, Canabal JA et al. Design and fabrication of flexible rod meshes. ACM Transactions on Graphics 2015; 34 (4): 138.
- [18] Panetta J, Zhou Q, Malomo L, Pietroni N, Cignoni P et al. Elastic textures for additive fabrication. ACM
Transactions on Graphics 2015; 34 (4): 135.
- [19] Schumacher C, Bickel B, Rys J, Marschner S, Daraio C et al. Microstructures to control elasticity in 3d printing.
ACM Transactions on Graphics 2015; 34 (4): 136.
- [20] Martinez J, Dumas J, Lefebvre S. Procedural Voronoi foams for additive manufacturing. ACM Transactions on
Graphics 2016; 35 (4): 44.
- [21] Konakovic M, Crane K, Deng B, Bouaziz S, Piker D et al. Beyond developable: computational design and fabrication with auxetic materials. ACM Transactions on Graphics 2016; 35 (4): 89.
- [22] Guseinov R, Miguel E, Bickel B. Curveups: shaping objects from flat plates with tension-actuated curvature. ACM Transactions on Graphics 2017; 36 (4): 64.
- [23] Schumacher C, Marschner S, Cross M, Thomaszewski B. Mechanical characterization of structured sheet materials.
ACM Transactions on Graphics 2018; 37 (4): 148.
- [24] Wang W, Wang TY, Yang Z, Liu L, Tong X et al. Cost-effective printing of 3d objects with skin-frame structures.
ACM Transactions on Graphics 2013; 32 (6): 177.
- [25] Lu L, Sharf A, Zhao H, Wei Y, Fan Q et al. Build-to-last: strength to weight 3d printed objects. ACM Transactions
on Graphics 2014; 33 (4): 97.
- [26] Mueller S, Im S, Gurevich S, Teibrich A, Pfisterer L et al. Wireprint: 3d printed previews for fast prototyping. In:
Proceedings of the 27th Annual ACM Symposium on User Interface Software and Technology; Honolulu, HI, USA;
2014. pp. 273–280.
- [27] Peng H, Wu R, Marschner S, Guimbretiere F. On-the-fly print: incremental printing while modelling. In: Proceedings of the 2016 CHI Conference on Human Factors in Computing Systems; San Jose, CA, USA; 2016. pp.
887–896.
- [28] Wu R, Peng H, Guimbretiere F, Marschner S. Printing arbitrary meshes with a 5 dof wireframe printer. ACM
Transactions on Graphics 2016; 35 (4): 101.
- [29] Narain R, Samii A, O’Brien JF. Adaptive anisotropic remeshing for cloth simulation. ACM Transactions on Graphics
2012; 31 (6): 152.
- [30] Peng CH, Zhang E, Kobayashi Y, Wonka P. Connectivity editing for quadrilateral meshes. ACM Transactions on
Graphics 2011; 30 (6): 141.