Niyazi Ugur KOCKAL

Role of construction industry wastes on the properties of mortars

This study investigated the performance of cement mortars prepared by substituting 30% and 60% of crushed calcareous fine aggregate (CNA) with waste fine aggregates namely, crushed brick aggregate (CBA), crushed marble aggregate (CMA) and crushed ceramic aggregate (CCA). For this purpose, absorption, unit weight, compressive strength, flexural strength, resistance to high temperature up to 400 oC and resistance to freeze-thaw cycles were determined for these mortars. In addition, XRF analysis was performed on cement and waste aggregates. From the experimental results, it is found that CBA mortars exhibited the lowest strength values and worst durability properties. However, CBA and especially CCA mortars were more effective in relative strength gain at 56 days

Keywords:

Strength, high temperature, freeze-thaw morphology,

PDF

___

Aruntas, H. Y., Guru, M., Dayı, M., & Tekin, I. (2010). Utilization of waste marble dust as an additive in cement production. Materials and Design, 31, 4039–4042.
Bektas, F., Wang, K., & Ceylan, H. (2009). Effects of crushed clay brick aggregate on mortar durability. Construction and Building Materials, 23, 1909–1914.
Belaidi, A. S. E., Azzouz, L., Kadri, E., & Kenai, S. (2012). Effect of natural pozzolana and marble powder on the properties of self-compacting concrete. Construction and Building Materials, 31, 251–257.
Böke, H., Akkurt, S., İpekoğlu, B., & Uğurlu, E. (2006). Characteristics of brick used as aggregate in historic brick-lime mortars and plasters. Cement and Concrete Research, 36, 1115–1122.
Gonçalves, J. P., Tavares, L. M., Toledo Filho, R. D., & Fairbairn, E. M. R. (2009). Performance evaluation of cement mortars modified with metakaolin or ground brick. Construction and Building Materials, 23, 1971–1979.
Hebhoub, H., Aoun, H., Belachia, M., Houari, H., & Ghorbel E. (2011). Use of waste marble aggregates in concrete. Construction and Building Materials, 25, 1167–1171.
Higashiyama, H., Sappakittipakorn, M., Sano, M., & Yagishita F. (2012). Chloride ion penetration into mortar containing ceramic waste aggregate. Construction and Building Materials, 33, 48–54.
Medina, C., Sánchez de Rojas, M. I., & Frías, M. (2012). Reuse of sanitary ceramic wastes as coarse aggregate in eco-efficient concretes. Cement & Concrete Composites, 34, 48–54.
O’Farrell, M., Sabir, B. B., & Wild, S. (2006). Strength and chemical resistance of mortars containing brick manufacturing clays subjected to different treatments. Cement & Concrete Composites, 28, 790–799.
Pacheco-Torgal, F., & Jalali, S. (2010). Reusing ceramic wastes in concrete. Construction and Building Materials, 24, 832–838.
Senthamarai, R. M., Devadas Manoharan, P., & Gobinath, D. (2011). Concrete made from ceramic industry waste: durability properties. Construction and Building Materials, 25, 2413–2419.