Maciej KUCHAR

DOKUMA KUMAŞLARIN TİTREŞIMLI BİR TARAK İLE TEFELENMESİ KOŞULLARI ÜZERİNE KARŞILAŞTIRMALI BİR ÇALIŞMA

COMPARATIVE STUDY ON THE CONDITIONS OF THICKENING WOVEN FABRICS WITH A VIBRATING REED

The results of measuring the load of a warp thread with a beating-up force and the density of weft threads obtained in a woven fabric using both a vibrating and rigid reed were presented. The improvement of the conditions of thickening weft threads as a result of using the vibrating reed was indicated. A simulation model of the thickening zone of a woven fabric was presented. The influence of the parameters of vibratory motion of the reed on the improvement in the conditions of thickening woven fabrics was analyzed

Keywords:

Weft beating-up force, vibratory beating-up, thicken of wefts vibrating reed,

PDF

___

1. Kuchar M., Słodowy J. 2011, “Operational and technological aspects of vibration beat-up”, Textiles Review: Textiles, Clothing and Leather No 4, pp. 26-28 and No 5, pp. 23-25
2. Wrocławski Z. 1997, “The vibration beat up of the weft”, FIBRES & TEXTILES in Eastern Europe, No 4, pp. 78-80
3. Kuchar M. 2013, “The vibration beat-up in the weaving loom”, Scientyfic Bulletin of The Lodz University of Technology
4. Kuchar M. 2013, “Vibratory Thickening of Weft Threads in a Weaving Loom – Simulation Tests”, FIBRES & TEXTILES in Eastern Europe, 21, No 5(101) pp. 59-64 . 5. Azzam H. A., Büsgen A. 2006, “Dynamic cloth fell movement” Part I: Critical review. AUTEX Research Journal, Vol. 6, No 1 March
6. Çelik Ö., Eren R. 2014, “Mathematical analysis of warp elongation in weaving machines with positive backrest system”, TEKSTİL ve KONFEKSİYON, No 24(1), pp. 56-64
7. Katunskis J.: Theoretical and Experimental Beat-up Investigation. FIBRES & TEXTILES in Eastern Europe July / October 2004, Vol. 12, No. 3 (47)
8. Masajtis J. 1978, “The static of creation and autoregulation of the fabric structure by theory S. Nosek”, Scientyfic Bulletin of The Lodz University of Technology
9. Bilişik K., Yildirim B. 2013, “Investigation of stick-slip stage of yarn pull-out in dry and softening treated polyester ribs woven fabric”, TEKSTİL ve KONFEKSİYON, No 23(3), pp. 247-254
10. Kuchar M., Michalak A. 2012, “Cling of threads as a parameter accompanying the acting force during weaving”, Textiles Review: Textiles, Clothing and Leather, No 7, pp. 19-22
11. Svetnickienė V., Čiukas R. 2009, “Investigation of friction properties of yarns from natural fibres”, MECHANIKA, No.1(75) 12. Mikołajczyk Z. 2011, “Optimisation of the Knitting Process on Warp-Knitting Machines in the Aspect of the Feeding Zone Geometry”, FIBRES & TEXTILES in Eastern Europe, Vol. 19, No. 4 (87) pp. 81-88.
13. Bakšys B., Sokolova T. 2009, “Mutual positioning of automatically assembled noncylindrical parts”, MECHANIKA, No.2(76)
14. Ramkumar S. S., Shastri L., Tock R. W., Shelly D. C., Smith M. L., Padmanabhan S.: Experimental Study of the Frictional Properties of friction Spun Yarns Journal of Applied Polymer Science, Vol. 88, 2450–2454 (2003) © 2003 Wiley Periodicals, Inc