TAŞ YIKAMANIN DENİM KUMAŞ PERFORMANSI ÜZERİNDEKİ ETKİLERİNİN ARAŞTIRILMASI

Taş yıkama, denim kumaşlarda en sık kullanılan yıkama uygulamalarından biridir. Taş yıkama işleminde amaç, denim ürünlere, uzun süre giyilmiş ve birçok kez yıkanmış efekti kazandırmaktır. Bu çalışmada, taş yıkamanın, denim kumaş özellikleri üzerindeki etkileri incelenmiştir. Seçilen bir denim kumaşa, taş yıkama esnasında farklı taş miktarı, sıcaklık ve süre seviyelerinde yıkama denemeleri yapılmıştır. Yapılan araştırmada, yıkamaların kumaşlar üzerindeki etkisini incelemek amacıyla, tekstil kumaşlarının performans tayininde kullanılan test metotları uygulanarak elde edilen sonuçlar istatistiksel metotlarla analiz edilmiştir. Deneysel çalışma sonuçlarının değerlendirilmesi sonucunda; taş yıkama prosesinde yıkama süresi, taş yıkama miktarı ve sıcaklık faktörlerinin kumaşlara uygulanan gramaj, en, yıkama sonrası çekme, elastikiyet, kalıcı uzama, dönme, kopma ve yırtılma mukavemeti üzerinde etkili olduğu görülmüştür.

INVESTIGATION OF EFFECTS OF STONE WASHING ON PERFORMANCE FOR DENIM FABRICS

Stone wash is one of the most frequently used washing applications for denim fabrics. The purpose of the stone washing process is to give the denim products an effect that has been worn for a long time and washed many times. In this study, the effects of stone wash applications on denim fabric properties are examined. A selected denim fabric was washed with different amounts of stone, temperature and duration during washing. In the research conducted, the results obtained by applying the test methods used in the performance evaluation of textile fabrics were analyzed by statistical methods in order to examine the effect of the washings on the fabrics. By evaluating the experimental study results; It has been found that while the stone washing process time, amount of stone and temperature of washing bath has effects on the fabric weight, width, shrinkage after washing, skew movement, tensile and tear strength properties.

___

  • 1. Karagöz, G., (2009), Denim Yıkama İşlemlerinde Ortaya Çıkan Zararlar Nedenleri ve Çözüm Olanakları, Ege Üniversitesi, Fen Bilimleri Enstitüsü, Tekstil Mühendisliği Anabilimdalı, Yüksek Lisans Tezi, İzmir.
  • 2. Türkant, B., Türkiye'nin Denim Kumaş ve Konfeksiyon Dış Ticareti ile Dünya Denim Pazarı için 2014 Tahminleri, www.itkib.org.tr, Erişim Tarihi : 20.09.2016
  • 3. Bağıran, İ.C., (2011), Denim Yıkamada Karşılaşılan Sorunlar Ve Bunlara Yönelik Çözüm Önerileri, Ege Üniversitesi, Fen Bilimleri Enstitüsü, Tekstil Mühendisliği Anabilimdalı, Yüksek Lisans Tezi, İzmir.
  • 4. Card, A., Moore, M.A., Ankeny, M., (2006), Garment Washed Jeans: Impact of Launderings on Physical Properties, International Journal of Clothing Science and Technology, 18(2), 43-52.
  • 5. Aslan, M., Körlü, A., (2009), Selülaz Enziminin Denim Yıkamada Kullanımı, Tekstil Teknolojileri Elektronik Dergisi, 3(1), 11-23.
  • 6. Khedher, F., Dhouıb, S., Msahlı, S., Saklı, F., (2009), The Influence of Industrial Finishing Treatments And Their Succession on The Mechanical Properties of Denim Garment, Autex Research Journal, 9(3), 93-100.
  • 7. Yi, C.M., (2011), Effect of Washıng on Tensıle Strength of Denım Fabrics, A Thesis Degree of Bachelor of Arts (Honours) Scheme in Institute of Textiles & Clothing, The Hong Kong Polytechnic University. Hong Kong.
  • 8. Khan, M.M.R., Mondal, M.I.H., Uddin, M.Z., (2011), Effect of Bleach Wash on The Physıcal and Mechanıcal Propertıes of Denim Garments, International Conference on Mechanical Engineering, 87- 93, Dhaka, Bangladesh.
  • 9. Nergis, A., Oğulata, R.T., (2016), Denim Kumaşlarda Farklı Yıkama Proseslerinin Kumaş Performans Özelliklerine Etkisi, Çukurova Üniversitesi, Fen Bilimleri Enstitüsü, Tekstil Mühendisliği Anabilimdalı, Yüksek Lisans Tezi, Adana.
  • 10.ASTM D3776 - 09a, (2013), Standard Test Methods for Mass Per Unit Area (Weight) of Fabric, ASTM International.
  • 11.ASTM D3774 - 96, (2016). Standard Test Method for Width of Textile Fabric, ASTM International.
  • 12.LS&CO. METHOD-2, (2004), Skew Movement Method In Launderıng, Levi's Strauss&Co. Test Standards.
  • 13.ASTM D5034 - 09, (2013), Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test), ASTM International.
  • 14.TS EN ISO 5077, (2012), Tekstil-Yıkama ve Kurutmada Boyut Değişmesinin Tayini, Türk Standartları Enstitüsü, Ankara.
  • 15.ASTM D1424 - 09, (2013), Standard Test Method For Tearing Strength of Fabrics By Falling -Pendulum (Elmandorf - Type) Apparatus, ASTM International.
  • 16.ASTM D3107 - 07, (2015). Standard Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns, ASTM International.
Tekstil ve Mühendis-Cover
  • ISSN: 1300-7599
  • Yayın Aralığı: Yılda 4 Sayı
  • Başlangıç: 1987
  • Yayıncı: TMMOB Tekstil Mühendisleri Odası