TUZLU SUYA MARUZ KALAN NOMEX KUMAŞLARIN ISIL İLETKENLİĞİ VE DİRENCİ

THERMAL CONDUCTIVITY AND RESISTANCE OF NOMEX FABRICS EXPOSED TO SALTY WATER

The most important parameters characterizing thermophysiological comfort of clothing are thermal conductivity and thermal resistance. Protective and sport clothing is often used in wet state, which influences their comfort properties. Wet state of clothing can be caused due to the absorption of sweat or moisture from humid environment. This effect was particularly applies to people staying on the sea - sailors, seamen as well as marine soldiers. In this paper, Alambeta fast working PC controlled tester, was used for determination of thermal resistance and thermal conductivity of five different woven fabrics and one knitted fabric containing 93-100% of Nomex fibres, both in dry and wet state. Moreover, the effect of salinity of real sweat or sea water was simulated, by adding 1%, 2% and 3% of salt into the testing liquid (distilled water). As follows from the original results, even small content of the sodium chloride salt influences thermal comfort properties of the wetted fabrics

___

  • 1. Hes L., Sluka, P., 2005, “Introduction into Clothing Comfort”, Textbook (in Czech), Technical University of Liberec,
  • 2. Gibson, P. W., 1993, “Factors influencing steady-state heat and water-vapour transfer measure for clothing materials”, Textile Research Journal, Vol. 63, No.12 (199), pp.749-764, ISSN: 0040-5175
  • 3. Hes L., 2007, “Thermal Comfort Properties of Textile Fabrics in Wet State”, Book of Proc. of Izmir International Textile and Apparel Symposium, Cesme (Turkey)
  • 4. Bogusławska – Bączek M., Hes L., 2011, “The Effect of Moisture on Thermal Resistance and Water Vapour Permeability of Nomex Fabrics”, Journal of Materials Science and Engineering A Vol.1 pp. 358-366, ISSN 1934-8959
  • 5. Bogusławska – Bączek M., Hes L., 2013, Effective Water Vapour Permeability of Wet Wool Fabric and Blended Fabrics, Fibres & Textiles in Eastern Europe, Vol. 21, 1(97): pp. 67-71, ISSN 1230-3666
  • 6. Oğlakcioğlu N., Marmarali A., 2010, „Thermal Comfort Properties of Cotton Knitted Fabrics in Dry and Wet States”, TEKSTIL VE KONFEKSIYON, Vol. 3, pp. 213-217, ISSN: 1300-3356
  • 7. Kolesnikova P. A., 1977, “Osnvy projektirovania tepłozaścitnoj odeży”, Legkaja Industria, Moskwa, (in Russian)
  • 8. Patterson M. J., Galloway S.D.R., Nimmo M. A., 2011, “Variations in Regional Sweat Composition in Normal Human Males”, Experimental Physiology, Vol. 85 (6) pp. 870 -876, ISSN: 0958-0670
  • 9. Lewis, E. L., 1982, "The Practical Salinity Scale of 1978 and Its Antecedents", Marine Geodesy, Vol. 5 (4), pp. 350.
  • 10. Pinet, R., 1996, “Invitation to Oceanography”, St. Paul: West Publishing Company, ISBN 978-0-314-06339-7,
  • 11. DuPoin Personal Protection. Aramid fibres – heat –resistant clothing, flame-resistant clothing, Available from www.dpp-europe.com/-Fibres,354- .html?lang=en#, Accessed: 2010-04-10
  • 12. Hes, L., Loghin C., 2009, “Heat, Moisture and Air Transfer Properties of Selected Woven Fabrics in Wet State”, Journal of Fiber Bioengineering and Informatics, Vol. 2 (3), pp. 188-197, ISSN 1940-8676
  • 13. Yusufova V. D., Pepinov R. I., Nikolaev V. A., Guseinov G. M., 1975, “Thermal conductivity of aqueous solutions of NaCl”, Journal of Engineering Physics and Thermophysics, Vol. 29, 4, pp. 1225-1229, ISSN: 1062-0125.
Tekstil ve Konfeksiyon-Cover
  • ISSN: 1300-3356
  • Yayın Aralığı: Yılda 4 Sayı
  • Yayıncı: Ege Üniversitesi Tekstil ve Konfeksiyon Araştırma & Uygulama Merkezi
Sayıdaki Diğer Makaleler

HIRVATİSTAN TEKSTİL SANAYİNİN İHRACAT REKABET GÜCÜ R11; SABİT PİYASA PAYI ANALİZİ VE EKONOMİ İÇİN ÖNEMİ

Goran BUTURAC, željko LOVRİNČEVİĆ, Davor MİKULİĆ

HESAPLAMALI AKIŞKANLAR DİNAMİĞİ YARDIMIYLA ÖRME KUMAŞLARIN HAVA GEÇİRGENLİĞİNİN TAHMİN EDİLMESİ

Serin MEZARCIÖZ, Serkan MEZARCIÖZ, R.tuğrul OĞULATA

HAZIR GİYİM ÜRETİMİNDE ALTI SİGMA YÖNTEMİNİ KULLANARAK ÜRETİM HATALARININ AZALTILMASI: BİR ÖRNEK ÇALIŞMA

Kürşat ÖNCÜL, M. Çetin ERDOĞAN, Mustafa GÜNEŞ

Reducing product defects in apparel manufacturing by using the six sigma methodology: A case study

Kürşat ÖNCÜL, Mustafa GÜNEŞ, M. Çetin ERDOĞAN

İPLİK VE KUMAŞ KONSTRÜKSİYON PARAMETRELERİNİN DOKUMA KUMAŞLARIN DÖKÜMLÜLÜK VE EĞİLME DAVRANIŞINA ETKİSİ

Nilgün ÖZDİL, Arif Taner ÖZGÜNEY, Gamze SÜPÜREN MENGÜÇ, Sima SERTSÖZ

PAMUK-POLİESTER SERT ÖZLÜ EĞRİLMİŞ İPLİKLERİN İPLİK ÖZELLİKLERİNİ ETKİLEYEN PARAMETRELER ÜZERİNE BİR ARAŞTIRMA

Emine EREZ, Pınar ÇELİK

Research on fast fashion and fast fashion retailing in Turkish apparel sector

Yasemin HACIOLA, Turan ATILGAN

A research on the parameters of the affecting yarn properties of cotton-polyester rigid core-spun yarns

Emine EREZ, Pınar ÇELİK

METOT ANALİZİNİN ÜRETİM HACMİ VE MONTAJ HATTI VERİMLİLİĞİNE ETKİSİNİN ARAŞTIRILMASI

Mahmut KAYAR, Mehmet AKALIN

FARKLI YUMUŞATMA FORMÜLASYONLARI KULLANARAK ÇARŞAF ISIL KONFOR ÖZELLİKLERİNİN OPTİMİZASYONU

Maria Jose ABREU, Candida VIDRAGO, Graça Maria SOARES