Moaaz ELDEEB, İsmael RAKHA, Fawkia FAHİM, Eman ELSHAHAT

KONVANSİYONEL RİNG VE KOMPAKT KATLI İPLİKLERİN ÜRETİM PROSESİNİN OPTİMİZASYONU

OPTIMIZING THE PRODUCTION PROCESS OF CONVENTIONAL RING SPUN AND COMPACT PLIED YARNS

The present study deals with the optimization of spinning and plying process of raw and finished conventional ring spun and compact yarns. It was found that compact yarns have better properties before and after applying finishing process as compared to ring spun yarns. There was relative improvement in the properties of yarns after finishing process but this improvement was less in case of compact yarns. The hairiness of finished compact yarn (not singed) was better compared to the conventional singed ring spun yarn. A graphical method was utilized to find the range of alpha single and alpha plied twist factor to fulfill defined yarn parameters such as strength, elongation and hairiness (feasible region)

Keywords:

Compact, plied yarn, finishing twist factor, feasible region, singeing, mercerizing,

PDF

___

1. Brunk, N. (2004). "Reflections on The Spinning of Two-Ply Yarns with EliTwist CompactSet", Spinnovation, Vol. 20, pp. 10-13.
2. Brunk, N. (2004). "EliTcompactset-Versatile Method of Yarn Compactation", Melliand International, Vol. 10, pp. 24-27.
3. Ömeroğlu, S. (2013). “An investigation on the effects of ply and single twists on strength, hairiness and abrasion resistance properties of two-ply cotton ringspun yarns”, Tekstil ve Konfeksiyon, 23(2), pp. 204-212.
4. Çelik P., and Kadoğlu H. (2007). “The effect of spinning method on yarn hairiness on worsted yarns”, Tekstil ve Konfeksiyon, Vol 2, pp. 97-103.
5. Rakha, I., El-bealy, R., EI-Messiry, M. (1995). "Optimum Twist of Plied Yarns Predictions", Mansoura Engineering Journal, 20(1), pp. 15-21.
6. Barella, A. (1957). "Yarn hairiness: the influence of twist", Journal of textile institute, Vol. 48, pp. 268-280.
7. Coulson, W., Dakin, G. (1957). "Doubled yarns: The effects on their physical properties of differences of singles twist doubling twist, direction of doubling traveller weight and spindle speed", Journal of textile institute, Vol. 48, pp. 258-291.
8. Coulson, W., Dakin, G. (1957). "The influence of twist on the strength and certain other properties of two-fold yarns", Journal of textile institute, Vol. 48, pp. 207-231.
9. Palaniswamy K., and Mohamed, P. (2006). “Effect of the single-yarn twist and ply to single-yarn twist ratio on the hairiness and abrasion resistance of cotton two-ply yarn”, AUTEX Research Journal, Vol. 6(2), pp. 59-71.
10. Özdil, N., Özdoğan E., Demirel, A., and Öktem, T. (2005). "A Comparative Study of The Characteristics of Compact Yarn-Based Knitted Fabrics", FIBERS & TEXTILES in Eastern Europe, Vol. 2(50), pp. 39-43.
11. Jackowski, T., Cyniak, D., and Czekalski J. (2004). "Compact Cotton Yarn", Fibers & Textiles in Eastern Europe, Vol. 4(48), pp. 22-26.
12. Nikolic, M., Stjepanovic Z., Lesjak F. and Stritof A. (2003). "Compact Spinning for Improved Quality of Ring-Spun Yarns", Fibers & Textiles in Eastern Europe, Vol. 4(43), pp. 30-35.
13. Sevil, Y. (2006). "Analysis of the Performance of Sewing Threads Manufactured from Conventional and Compact Ring-spun Yarns", FIBERS & TEXTILES in Eastern Europe, Vol. 14(2), pp. 20-23.
14. Guldemet, B., William, O. (2003). "Vortex spun yarn vs. air-jet yarn", AUTEX Research Journal, Vol. 3(3), pp. 96-101.
15. Akhbari, M., Zahiri, A., and Bassam, S. (2012). “Optimization of Parameters Influencing Mercerization Using the RSM Method in Order to Increase the Tensile Strength of Mercerized Yarn”, FIBRES & TEXTILES in Eastern Europe, Vol. 20(5), pp. 30-35.