Resul FETTAHOV, Mahire CIHANGIROVA, Yalcin YESIL

HAŞILLAMA İÇİN HAZIRLANAN ÇÖZGÜ LEVENTLERİNDE İPLİK UZUNLUĞUNUN BELİRLENMESİ

Dokuma işletmelerinde ürünün standart kalitesine zarar vermeden üretim maliyetlerinin düşürülmesi ile ilgi birçok çalışma yapılmıştır. Bunlardan en önemlisi dokuma üretimi aşamalarında oluşan iplik atıklarını azaltarak hammadde olan ipliğin rasyonel kullanımının sağlanmasıdır. Bu çalışmada, iplik teleflerini azaltmak amacıyla haşıl ve çözgü aktarma işlemlerinde hazırlanan leventlere sarılan iplik uzunluklarının tespiti için teorik incelemeler yapılmıştır. Ayrıca haşıl makinalarında farklı tip çözgü sehpalarında yerleştirilen ayrı ayrı leventlere sarılacak iplik uzunluğunu belirleyen denklemler geliştirilmiş ve pratikte uygulanması önerilmiştir.

Anahtar Kelimeler:

Dokuma üretimi, Haşıl işlemi, İplik tefleri, Çözgü levendi, İplik uzunluğu

DETERMINATION OF YARN LENGTH IN WARP BEAMS FOR SIZING

There has been a vast amount of attempts in the weaving companies for reducing the production costs without compromising the product quality. One of the most common methods is the reduction of yarn waste produced during weaving. In this study, theoretical investigations were carried out for determination of the yarn length wound beams, prepared in sizing and warp transfer processes, for reducing the yarn wastes. In addition, equations which determine the length of yarn to be wound on separate beams of different types of creels in sizing machines have been developed and proposed for practical use.

Keywords:

Weaving, Sizing process, Yarn wastes, Warp beam, Yarn length,

PDF

___

1. Simon, L., and Hübner, M.,1983, “Preparation technique for weaving, knitting and hosiery”, Ed. Simon, L., Knitting and Hosiery, No:1, Springer-Verlag Berlin Heidelberg, p. 392. (Deutsch)
2. Behera, B.K., Mishra, R. and Gupta, R., 2008, “Comparative analysis of mechanical properties of size film, II. Effect of blend composition and lubricants”, Fibers and Polymers, 9(4), p. 489-494.
3. Gordeev, V.A. and Volkov, P.V., 1984, “Weaving”, Legkaya Pishchevaya Prom-st w, p. 151, Moscow. (Russian)
4. Seyam, A., 2000, “Advances in Weaving and Weaving Preparation”, Textile Progress, 30(1-2), p. 22-40.
5. Eren, R., 2009, “Dokuma Hazırlık Sistemleri”, MKM Yayınları, Bursa.
6. Gubin, V.V. and Makarov, A.A., 2012, “Device for measuring the length of the warp wound on the warp beam or warp shaft of a sectional or high-speed warping machine”, Fibre Chemistry, 44(1), p. 61-63.
7. Karahan, H.A., et al., 2007, “Some Methods Used for the Surface Modification of Textiles”, Tekstil ve Konfeksiyon, 17(4), p. 248-255.
8. Goswami, B.C., Anandjiwala, R.D. and Hall, D., 2004, “Textile sizing”, CRC Press, p. 243-247.
9. Djordjevic, S., et al., 2012, “Importance of Polymer Size Rheology for Efficient Sizing of Cotton Warp Yarns”, Tekstil ve Konfeksiyon, 22(2), p. 77-82.
10. Zaitsev, V. P., 1968,“The dependence of the yarn length wound on warping package at from the angle of its rotation”, Proceedings of the Universities, The technology of the textile industry, No:5, p. 70-73. (Russian)
11. Vlasov, P. V., Martinov, A. A., Nikolaev, S. D., et al., 1983, “Design of weaving factories”, 2nd Ed., Rev. and ext., p.303, Moscow. (Russian)
12. Loktyusheva, V. I., Bogorach, P. C., 1987,“Design of weaving factories”, Legprombytizdat, p.264, Moscow. (Russian)
13. Zaitsev, V. P., 1970,“On the equality of lengths of yarn wound on the warping beem”, Proceedings of the Universities, The technology of the textile industry, No:3. (Russian)
14. Zaitsev, V. P., Machover, V. L., 1973,“Effect of different yarns length in warping winding shaft to deformation them in the process of winding”, Proceedings of the Universities, The technology of the textile industry,No:4, p. 71-76. (Russian)
15. Volkov, P.V., Gordeyev, V.A. and Nikiforov, S.I., 1971, “Design of Weaving Factory”, Lyogkaya Industriya, p. 488, Moscow. (Russian)