ATIK ÖRDEK TÜYÜ İÇEREN KOMPOZİT MALZEMELERİN SES YUTUM ÖZELLİKLERİ

SOUND ABSORPTION PROPERTIES OF COMPOSITES MADE OF DISCARDED DUCK FEATHERS

A novel composite with good sound absorption properties was prepared by discarded duck feathers and Ethylene vinyl acetate copolymer (EVA) non-woven fabrics by using lay-up and hot-pressing method. The effects of discarded duck feather concentration, composite density, composite thickness and air cavity depth on sound absorption performance were studied. When the composites with proportion (w/w) of the discarded duck feathers to EVA non-woven fabrics of 300/100, density of 1400g/m2, thickness of 20mm, the noise reduction coefficient (NRC) was 0.54. By adding the 30mm air cavity depth, the NRC of the composite increased from 0.54 to 0.76. Theoretical models for the prediction of sound absorption coefficients of composites made of discarded duck feathers were presented. The good agreement was obtained by the comparison of measured and calculated absorption coefficient curves. The theoretical models were therefore suitable for the design of discarded duck feather composites with an excellent sound absorption performance

Keywords:

Discarded duck feathers, composites, sound absorption, theoretical model,

PDF

___

1. Wang, HX., 2000, “Quality and inspection of feather and its products”, China Textile and Apparel Press.
2. Li, XW., Xu, HF., Wu, DY., 2012, “Study on Preparation Compound Amino-acids from Duck Feather Hydrolysis”, Journal of Ankang University, Vol.24, pp:80-82.
3. Zhou, B., Wang, HL., 2011, “Preparation of reconstituted feather protein/PVA composite fiber”, China Synthetic Fiber Industry, Vol.34, pp:25-27.
4. Yao, QH., Song, YK., Lin, Q., 2010, “Study on preparation of feather peptide powder for feed”, China Feed, pp:37-43.
5. Carrillo, F., Rahhali, A., Canavate, J., 2013, “Bio composites using waste whole chicken feathers and thermoplastic matrices”, Journal of Reinforced Plastics and Composites, Vol.32, pp:1419–1429.
6. Chen, XJ., Yin, GQ., Cui, YD., 2008, “Progress of development and utilization of feather keratin”, Chemical Industry and Engineering Progress, Vol.27, pp:1390-1393.
7. Kan, CW., 1998, “Surface properties of low temperature plasma treated wool fabrics”, Journal of Materials Processing Technology, Vol.83, pp:180-184.
8. Zhao, YM., Yang, CL., Cai, T., 2007, “The structure, property and application of the feather fiber”, Knitting industry , Vol.2, pp:20-23. 9. Reddy, N., Yang, Y., 2010, “Light-Weight Polypropylene Composites Reinforced with whole Chicken Feathers”, Journal of Applied Polymer Science, Vol.116, pp:3668–3675.
10. Huda, S., Yang, Y., 2009, “Feather Fiber Reinforced Light-Weight Composites with Good Acoustic Properties”, Polym. Environ , Vol.17, pp:131-142.
11. Yang, Y. , Reddy, N., 2013, “Utilizing Discarded Plastic Bags as Matrix Material for Composites Reinforced with Chicken Feathers”, Journal of Applied Polymer Science, Vol.130, pp:307-312.
12. Bao, W., Liu, JL., 2013, “A coustic research of dual-layered nonwoven absorbers”, Science and Technology, pp:39-42.
13. Soltani, P., Zarrebini, M., 2012, “The analysis of acoustical characteristics and sound absorption coefficient of woven fabrics”, Textile Research Journal, Vol.9, pp:875-882.
14. Soltatani, P., Zarrebini, M., 2013, “Acoustic performance of woven fabrics in relation to structural parameters and air permeability”, Journal of the Textile Institute, Vol.9, pp:1011–1016.
15. Shahani, F., Soltani, P., Zarrebini, M., 2014, “The analysis of acoustic characteristics and sound absorption coefficient of needle punched non-woven fabrics”, Journal of Engineered Fibers and Fabrics , Vol.2, pp:84-92.
16. Pieren R, 2013, “Sound absorption modeling of thin woven fabrics backed by an air cavity”, Textile Research Journal , Vol.89, pp:864-874.
17. Delany, M.，Bazley, N., 1970, “Acoustical properties of fibrous absorbent materials”, Applied Acoustics, Vol.3, pp:105-116．
18. Liu, JL., Liu, XJ., Gao, WD., 2011, “Simulation of Sound Absorption Model for Dual－Layer Porous non-wovens”, Computer Simulation , Vol.28, pp:374- 378.
19. Trochidis, A., Kalaroutis, A., 1986, “Sound transmission through double partitions with cavity absorption”, Journal of Sound and Vibration, Vol.107, pp:321- 327.
20. Zhao, Sl., Lu, YW., 1979, “Propagation of acoustic waves in fibrous sound absorbents”, Acta Acustica, Vol.1, pp:1-10.
21. Yin, Y.，Zhao, SL., 1996, “Test technology and application of complex characteristic impedance and sound velocity of sound aborption materials”, Technical Acoustics, Vol.15, pp:32．
22. Jiang, ZX., Wang, ZM., 2013, “Sound Propagation in Fibrous Absorption Materials with Bonding Effect”, Journal of Tongji University, Vol.41, pp:299-302.
23. Allard, JF., Champoux, Y., 1992, “New empirical equations for sound propagation in rigid frame fibrous materials”, Journal of the Acoustical Society of America, Vol.91, pp:3346–3353.
24. Meng, H., Xin, FX., Lu, TJ., 2014, “Acoustical properties of honeycomb structures filled with fibrous absorptive materials”, Scence China Press, Vol.44, pp:599-609.
25. Hu, SC., Zhong, XZ., 1994, “Study on airflow resistivity of porous fibrous absorbent materials”, Technical Acoustics, Vol.13, pp:139-143．
26. Liu, PH., Yang, YQ., Yao, JC., 2011, “Study on Absorption Property of Porous Sound-Absorbing Materials”, Noise and Vibration Control, Vol.2, pp:123- 126.
27. Wang, XL., 2007, “An optimized model for porous metal sound absorbers”, Journal of acoustics, Vol.2, pp:116-1221.