Akrilik Lateksin Bitümlü Sıcak Karışımların Nem Hassasiyeti Üzerindeki Etkisinin Araştırılması

Polimerler Bitümlü Sıcak Karışımların (BSK) performansını artırmak amacıyla kullanılan popüler katkı malzemeleridir. Bu çalışmada, asfalt karışımların performansını artırmak amacıyla akrilik lateks seçilmiştir. Akrilik lateks karışıma üç farklı oranda (%1, %2 ve %3) karıştırılarak bitümlü sıcak karışımların performansı incelenmiştir. Dizayn bitüm içerikleri her bir oran için ayrı ayrı belirlenmiştir. Akrilik lateks ile karıştırılmış BSK için İndirekt çekme dayanımı ve nem hassasiyeti AASHTO T283 test prosedürü dikkate alınarak belirlenmiştir. Elde edilen sonuçlara göre, dizayn bitüm içeriği artırılmıştır. Bitüm içeriği artmasına rağmen, hem indirekt çekme (IDT) dayanımı hem de neme karşı dayanımda iyileştirme elde edilmiştir. En iyi performansı gösteren akrilik lateks katkı oranı %3 olarak belirlenmiştir. Sonraki çalışmalar için akrilik lateks oranının artırılması önerilmektedir.

Anahtar Kelimeler:

Akrilik lateks, Bitüm modifikasyonu, İndirekt çekme dayanımı, Nem hassasiyeti

Investigating The Effect of Acrylic Latex on Moisture Susceptibility of Hot Mix Asphalt

Polymers are popular materials as an additive to improve the performance of hot mix asphalt (HMA). To this aim, acrylic latex was chosen to improve the performance of asphalt mixture. In this study, it was investigated that the performance of hot mix asphalt with acrylic latex additive in three percentages (1%, 2% and 3%). Design bitumen contents were determined for all acrylic latex additive. Indirect Tensile Strength and moisture susceptibility of acrylic latex added HMA was conducted using test procedure of AASHTO T283. According to the results, design bitumen contents were increased by acrylic latex. Although the bitumen content was increased, both the indirect tensile (IDT) strength and the moisture resistance were improved by acrylic latex. Best performance was obtained by 3% acrylic latex additive. It is suggested that the percentage of acrylic latex would be increased for further researches.

Keywords:

Acrylic latex, Bitumen modification, Indirect tensile strength, Moisture susceptibility,

PDF

___

[1] Sutanto, M., Bala, N., Al Zaro, K., Sunarjono, S. 2018. Properties of Crumb Rubber and Latex Modified Asphalt Binders using Superpave Tests, In MATEC Web of Conferences 203, 05007.
[2] Wen, Y., Wang, Y., Zhao, K., Sumalee, A. 2017. The use of natural rubber latex as a renewable and sustainable modifier of asphalt binder. International Journal of Pavement Engineering, 18(6), 547-559.
[3] Shafii, M., Ahmad, J., Shaffie, E. 2013. Physical properties of asphalt emulsion modified with natural rubber latex. World Journal Engineering, 10(2), 159-164.
[4] Cai, H. M., Wang, T., Zhang, J. Y., Zhang, Y. Z. 2010. Preparation of an SBS latex–Modified bitumen emulsion and performance assessment. Petroleum science and technology, 28(10), 987-996.
[5] Shaffie, E., Arshad, A. K., Alisibramulisi, A., Ahmad, J., Hashim, W., Abd Rahman, Z., Jaya, R. P. 2018. Effect of mixing variables on physical properties of modified bitumen using natural rubber latex. International Journal of Civil Engineering Technology, 9, 1812-1821.
[6] Daniel, N. H., Hassan, N. A., Idham, M. K., Jaya, R. P., Hainin, M. R., Ismail, C. R., Puan, O. C., Azahar, N. M. 2019. Properties of bitumen modified with latex. In IOP Conference Series: Materials Science and Engineering 527(1), 012063.
[7] Shaffie, E., Ahmad, J., Arshad, A. K., Kamarun, D., Kamaruddin, F. 2015. Stripping performance and volumetric properties evaluation of hot mix asphalt (HMA) mix design using natural rubber latex polymer modified binder (NRMB). In CIEC 2014, 873-884, Springer, Singapore.
[8] Zhang, Q., Fan, W., Wang, T., Nan, G. 2011. Studies on the temperature performance of SBR modified asphalt emulsion. In 2011 International Conference on Electric Technology and Civil Engineering (ICETCE), 730-733.
[9] Forbes, A., Haverkamp, R. G., Robertson, T., Bryant, J., Bearsley, S. 2001. Studies of the microstructure of polymer‐modified bitumen emulsions using confocal laser scanning microscopy. Journal of microscopy, 204(3), 252-257.
[10] Abedini, M., Hassani, A., Kaymanesh, M. R., Yousefi, A. A. 2017. Low-temperature adhesion performance of polymer-modified Bitumen emulsion in chip seals using different SBR latexes. Petroleum Science and Technology, 35(1), 59-65.
[11] Khadivar, A., Kavussi, A. 2013. Rheological characteristics of SBR and NR polymer modified bitumen emulsions at average pavement temperatures. Construction and Building Materials, 47, 1099-1105.
[12] ASTM D5 / D5M-19. 2019. Standard Test Method for Penetration of Bituminous Materials, ASTM International, West Conshohocken, PA.
[13] ASTM D36 / D36M-14e1. 2014. Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus), ASTM International, West Conshohocken, PA.
[14] ASTM D113-17. 2017. Standard Test Method for Ductility of Asphalt Materials, ASTM International, West Conshohocken, PA.
[15] ASTM E3116-18. 2018. Standard Test Method for Viscosity Measurement Validation of Rotational Viscometers, ASTM International, West Conshohocken, PA.
[16] ASTM D7552-09. 2014. Standard Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer, ASTM International, West Conshohocken, PA.
[17] ASTM D6648-08. 2016. Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR), ASTM International, West Conshohocken, PA.
[18] AASHTO. 2014. AASHTO T 283: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage, American Association of State Highway and Transportation Officials (AASHTO).