STEEL FIBRE HIGH STRENGTH & ORDINARY CONCRETE SLABS UNDER PARTIALLY FIXED BOUNDARY CONDITIONS - AN EXPERIMENTAL STUDY

In this study, one of the fairly known practical plate problems was investigated experimentally, a square plate laterally loaded with single concentrated load at mid-span under all edges fixed. Clamping was made continuously along the edges with a small quantity of rotation. This type of clamping could be called as partially fixed. High-strength and ordinary concrete slabs containing steel wire fibers (volumetrically 0.5% and 1.0%) were constructed and tested. Load-deflection relationships were investigated. One of the objectives of this study was to investigate the effects of support rotations. Rotations of supports at corresponding load values were also measured. Ordinary concrete slabs support rotation values were recorded relatively close compared to high strength specimens. Mechanical properties of high-strength concrete and steel fibers were examined. Fracture patterns of plates were presented. Collapse occurred because of adherence loss in all slab specimens.

Keywords:

Steel fiber concrete, slab high strength concrete.,

PDF

___

[1] Uğural, A.C. (1981), Stresses in Plates and Shells, Mc-Graw Hill.
[2] Szilard, R.(2004), Theory and Analysis of Plates Classical and Numerical Methods, Prentice Hall Inc.
[3] Muthu K. U., Amarnath K., Ibrahim A., Mattarneh H. (2007) Load deflection behaviour of partially restrained slab strips, Engineering Structures 29(5), 663-674.
[4] Schmidt, R. (1984) Nonlinear analysis of loosely clamped plates, Journal of Engineering Mechanics 110 (8), 1237-1242.
[5] Foster S. J., Bailey C. G., Burgess I. W., Plank R. J. (2004) Experimental behaviour of concrete floor slabs at large displacements, Engineering Structures 26(9), 1231-1247.
[6] Hüsem M., Coşğun S.İ. (2016) Behavior of reinforced concrete plates under impact loading: different support conditions and sizes, Computers and Concrete 18(3), 389-404.
[7] Görkem S.E., Hüsem M. (2013) Load capacity of high-strength reinforced concrete slabs by yield line theory, Computers and Concrete 12(6), 819-829.
[8] Li B., X. Lihua, Shi Y., Chi Y., Li C. (2018) Effects of fiber type, volume fraction and aspect ratio on the flexural and acoustic emission behaviors of steel fiber reinforced concrete Construction and Building Materials 181, 474-486.
[9] Bao J., Wang L., Zhang Q., Liang Y., Song Y. (2018) Combined effects of steel fiber and strain rate on the biaxial compressive behavior of concrete, Construction and Building Materials 187, 394-405.
[10] Hoang A.L., Fehling E. (2017) Influence of steel fiber content and aspect ratio on the uniaxial tensile and compressive behavior of ultra high performance concrete, Construction and Building Materials 153, 790-806.
[11] Lu X., Zhang Y., Zhang H., Zhang H., Xiao R. (2018) Experimental study on seismic performance of steel fiber reinforced high strength concrete composite shear walls with different steel fiber volume fractions, Engineering Structures 171, 247-259.
[12] Ju H., Lee D., Su Kim K. (2019) Minimum torsional reinforcement ratio for reinforced concrete members with steel fibers Composite Structures 207, 460-470.
[13] Sudhir P. P., Keshav K. S. (2016) Tests of steel fibre reinforced concrete beams under predominant torsion, Journal of Building Engineering 6, 157-162.
[14] Mudadu A., Tiberti G., Germano F., Plizzari G. A., Morbi A. (2018) The effect of fiber orientation on the post-cracking behavior of steel fiber reinforced concrete under bending and uniaxial tensile tests, Cement and Concrete Composites 93, 274-288.
[15] Mousavi S.E. (2017) Flexural response and crack development properties of ferrocement panels reinforced with steel fibers, Journal of Building Engineering 12, 325-331.
[16] McMahon J. A., Birely A. C. (2018) Service performance of steel fiber reinforced concrete (SFRC) slabs, Engineering Structures 168, 58-68.
[17] Abbass W., Khan M. I., Mourad S. (2018) Evaluation of mechanical properties of steel fiber reinforced concrete with different strengths of concrete, Construction and Building Materials 168, 556-569.
[18] Görkem, S.E. (2009) Investigation of Behavior of High Strength Reinforced Concrete Slabs using Yield Line Theory, PhD. Thesis, Graduate School of Natural and Applied Sciences, Karadeniz Technical University, Trabzon, Turkey.

Sigma Mühendislik ve Fen Bilimleri Dergisi-Cover

ISSN: 1304-7191
Yayın Aralığı: Yılda 4 Sayı
Yayıncı: Yıldız Teknik Üniversitesi

Arşiv