A NEW METHOD FOR THE SIZE AND PERFORMANCE ANALYSES AND OPTIMIZATION OF THERMAL SYSTEMS: THE EXERGY DENSITY

With the acceptance of thermodynamics as a science field, an important step has been taken in the transition from thermal systems produced by trial and error method to planned and calculated systems which are produced according to determined standards. During this time, many performance criteria have been proposed and some of them have been widely used in design phases and in practical applications. In this study, the interaction between the performance and size of the thermal systems is examined by using a new proposed criterion, the exergy density, as a thermodynamic state property. The effects of pressure and temperature of working fluid on the exergy density values are obtained and property graphics are plotted. In addition to these, case studies for the air standard cycles (Otto, Diesel, Atkinson and Brayton) and a steam power (Rankine) cycle have been carried out. As a result, the proposed criterion or property for thermal systems has been shown to be beneficial in the design phase as it examines system dimensions as well as system performance.

Keywords:

Exergy, exergy density thermal systems, exergetic size.,

PDF

___

[1] R. Battino, S. E. Wood, and L. E. Strong, “A Brief History of Thermodynamics Notation,” J. Chem. Educ., vol. 74, no. 3, p. 304, Mar. 1997.
[2] S. Carnot, Réflexions sur la puissance motrice du feu et sur les machines propres à développer atte puissance. Bachelier Libraire, 1824.
[3] W. J. M. Rankine, A Manual of the Steam Engine and Other Prime Movers. R. Griffin, 1859.
[4] R. Mollier, Neue Diagramme zur Technischen Wärmelehre. 1904.
[5] I. I. Novikov, “The efficiency of atomic power stations (a review),” J. Nucl. Energy 1954, vol. 7, no. 1–2, pp. 125–128, Aug. 1958.
[6] F. L. Curzon and B. Ahlborn, “Efficiency of a Carnot engine at maximum power output,” Am. J. Phys., vol. 43, no. 1, pp. 22–24, Jan. 1975.
[7] I. K. Howard, “H Is for Enthalpy, Thanks to Heike Kamerlingh Onnes and Alfred W. Porter,” J. Chem. Educ., vol. 79, no. 6, p. 697, Jun. 2002.
[8] S. I. Sandler and L. V. Woodcock, “Historical Observations on Laws of Thermodynamics,” J. Chem. Eng. Data, vol. 55, no. 10, pp. 4485–4490, Oct. 2010.
[9] Y. A. Çengel and M. A. Boles, Thermodynamics: an engineering approach, 8th Edition, 8th ed. 2015.
[10] I. K. Howard, “S is for Entropy. U is for Energy. What Was Clausius Thinking?,” J. Chem. Educ., vol. 78, no. 4, p. 505, Apr. 2001.
[11] I. Dincer and Y. A. Cengel, “Energy, Entropy and Exergy Concepts and Their Roles in Thermal Engineering,” Entropy, vol. 3, no. 3, pp. 116–149, Aug. 2001.
[12] P. L. Corey, “NIST Guide to the SI, Chapter 4: The Two Classes of SI Units and the SI Prefixes,” NIST, 28-Jan-2016. [Online]. Available: https://www.nist.gov/pml/nist-guide-si-chapter-4-two-classes-si-units-and-si-prefixes. [Accessed: 10-Jul-2017].
[13] A. A. Minea, “Comparison of Environmentally Friendly Working Fluids for Organic Rankine Cycles,” in Advances in New Heat Transfer Fluids: From Numerical to Experimental Techniques, CRC Press, 2017, pp. 377–426.
[14] A. S. Karakurt, “A New Method for the Size and Performance Optimization of Thermal Systems: The Exergy Density,” PhD Thesis, Graduate School of Natural and Applied Sciences, Yildiz Technical University, Istanbul, Turkey, 2018.
[15] S. A. Klein, and F. L. Alvarado, EES-Engineering Equation Solver. 4406 Fox Bluff Rd. Middleton, WI 53562: F-Chart Software.
[16] A. S. Karakurt, “Analysis of the part load conditions effects on turbine performance,” Master Thesis, Graduate School of Natural and Applied Sciences, Yildiz Technical University, Istanbul, 2012.
[17] A. S. Karakurt and U. Günes, “Performance Analysis of a Steam Turbine Power Plant at Part Load Conditions,” J. Therm. Eng., vol. 3, no. 2, pp. 1121–1128, 2017.

Sigma Mühendislik ve Fen Bilimleri Dergisi-Cover

ISSN: 1304-7191
Yayın Aralığı: Yılda 4 Sayı
Yayıncı: Yıldız Teknik Üniversitesi

Arşiv