Umut Yaşar UZUNALI, Hamdullah CUVALCI, Barbaros ATMACA

14520

THE EFFECT OF DEPTH OF FUSION ON THE BEHAVIOR OF STEEL WELDED JOINTS

The aim of this study is to determine the effect of depth of fusion on the behavior of tempered martensite and thermomechanically rolled steel welded joints. To obtain the effect of depth of fusion on the stress and displacements, three different welded sample welded to each other by metal active gas welding method applied in PB position were prepared in accordance with the related standard. According to the welding procedure specification EN ISO 15614-1 which clarifies how samples should be welded, different current, voltage, travel speed and wire feed speed were selected for each sample. After the welding process, welded samples were subjected to visual and magnetic testing to evaluate quality of the weld seams. After the non-destructive tests, samples were cut into small pieces to measure the depth of fusion and three samples having different depth of fusion were obtained. The finite element models of these samples were created in ANSYS to evaluate the stresses and displacements of samples. The models of samples were subjected to the loads which range from 1000N to 45000N and the results were obtained under lineer- static analysis. The results of finite element analyses of samples such as stresses and displacements are compared with each other in terms of depth of fusion for each sample. It is seen that depth of fusion has remarkable effect on the behavior of welded joints.
Keywords:

Depth of fusion, finite element analysis high-strength steel, welded connection, weld design,

PDF

___

  • [1] ANSYS, (2015). Swanson Analysis System, USA.
  • [2] Cheng, B., Ye, X., Cao, X., Mbako, D. D. and Cao, Y. (2017). “Experimental study on fatigue failure of rib-to-deck welded connections in orthotropic steel bridge decks”, International Journal of Fatigue, Vol. 103, pp. 157-167, DOI: 10.1016/j.ijfatigue.2017.05.021.
  • [3] Deshmukh, A. R., Venkatachalam, G., Divekar, H. and Saraf, M. R. (2014). “Effect of weld penetration on fatigue life”. Procedia Engineering, Vol. 97, pp. 783-789, DOI: 10.1016/j.proeng.2014.12.277.
  • [4] Dung, C. V., Sasaki, E., Tajima, K. and Suzuki, T. (2015). “Investigations on the effect of weld penetration on fatigue strength of rib-to-deck welded joints in orthotropic steel decks”, International Journal of Steel Structures, Vol. 15, No. 2, pp. 299-310, DOI: 10.1007/s13296-014- 1103-4.
  • [5] Farajkhah, V., and Liu, Y. (2016). “Effect of metal inert gas welding on the behaviour and strength of aluminum stiffened plates”, Marine Structures, Vol. 50, pp. 95-110, DOI: 10.1016/j.marstruc.2016.07.005.
  • [6] Giri, A., Mahapatra, M. M., Sharma, K., and Singh, P. K. (2017). “A study on the effect of weld groove designs on residual stresses in SS 304LN thick multipass pipe welds”, International Journal of Steel Structures, Vol. 17, No. 1, pp. 65-75, DOI: 10.1007/s13296-016-0118-4.
  • [7] ISO 14175 (2008), Welding consumables. Gases and gas mixtures for fusion welding and allied processes, International Organization for Standardization, Geneva, Switzerland.
  • [8] ISO 15614-1 (2017), Specification and qualification of welding procedures for metallic materials. Welding procedure test. Arc and gas welding of steels and arc welding of nickel and nickel alloys, International Organization for Standardization, Geneva, Switzerland.
  • [9] ISO 17637 (2016), Non-destructive testing of welds - Visual testing of fusion-welded joints, International Organization for Standardization, Geneva, Switzerland.
  • [10] ISO 17639 (2003), Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds, International Organization for Standardization, Geneva, Switzerland.
  • [11] ISO 5817 (2014), Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections, International Organization for Standardization, Geneva, Switzerland.
  • [12] ISO 9934-1 (2016), Non-destructive testing - Magnetic particle testing - Part 1: General principles, International Organization for Standardization, Geneva, Switzerland.
  • [13] Joo, H. S., Moon, J., Sung, I. H. and Lee, H. E. (2015). “Moment redistribution of continuous composite I-girder with high strength steel”, Steel and Composite Structures, Vol. 18, No. 4, pp. 873-887 DOI:10.12989/scs.2015.18.4.873.
  • [14] Kainuma, S., Yang, M., Jeong, Y. S., Inokuchi, S., Kawabata, A. and Uchida, D. (2016). “Experiment on fatigue behavior of rib-to-deck weld root in orthotropic steel decks”, Journal of Constructional Steel Research, Vol. 119, pp. 113-122, DOI: 10.1016/j.jcsr.2015.11.014.
  • [15] Lan Kang, Motoya Suzuki and Hanbin Ge, (2018). “A study on application of high strength steel SM570 in bridge piers with stiffened box section under cyclic loading”, Steel and Composite Structures, Vol. 26, No. 5, pp. 583-594, DOI: 10.12989/scs.2018.26.5.583.
  • [16] Lu, S., Fujii, H. and Nogi, K. (2005). “Influence of welding parameters and shielding gas composition on GTA weld shape”, ISIJ international, Vol. 45, No. 1, pp. 66-70, DOI: 10.2355/isijinternational.45.66.
  • [17] Mert, T. (2009). “Finite element analysis of effect of weld toe radius and root gap on fatigue life of T-fillet welded joint”, Conference of the International Journal of Arts and Sciences, Vol. 1, pp. 119-127.
  • [18] Pettersson, G., and Barsoum, Z. (2012). “Finite element analysis and fatigue design of a welded construction machinery component using different concepts”, Engineering Failure Analysis, Vol. 26, pp. 274-284, DOI: 10.1016/j.engfailanal.2012.04.014.
  • [19] Spindler, H., Klein, M., Rauch, R., Pichler, A. and Stiaszny, P. (2005). “High strength and ultra high strength hot rolled steel grades-Products for advanced applications”, Proceedings of Super-High Strength Steels, Rome, Italy, Associazione Italian di Metallurgica.
  • [20] Wang, B., Lu, P. and Shao, Y. (2015). “Research on rib-to-diaphragm welded connection by means of hot spot stress approach”, Steel and Composite Structures, Vol. 18, No. 1, pp. 135-148, DOI: 10.12989/scs.2015.18.1.135.
  • [21] Yamamoto, T., Ohji, T., Miyasaka, F. and Tsuji, Y. (2017). “Mathematical modelling of metal active gas arc welding”, Science and Technology of Welding and Joining, Vol. 7, No. 4, pp. 260-264, DOI: 10.1179/174329313X13789830157429.
  • [22] Yang, X., & Lei, H. (2017). “Constant amplitude fatigue test of high strength bolts in grid structures with bolt-sphere joints”, Steel and Composite Structures, Vol. 25, No.5, pp. 571-579, DOI: 10.12989/scs.2017.25.5.571.
  • [23] Zhongqiu Fu, Bohai Ji, Yixun Wang and Jie Xu, (2018). “Fatigue performance of rib-roof weld in steel bridge decks with corner braces”, Steel and Composite Structures, Vol. 26, No. 1, pp. 103,113, DOI:
  • [24] Zhou, M., Zhang, H., and Hu, S. J. (2003). “Relationships between quality and attributes of spot welds”. Welding Journal, Vol. 82, No. 4, pp. 72-77, DOI:
Sigma Mühendislik ve Fen Bilimleri Dergisi-Cover
  • ISSN: 1304-7191
  • Yayın Aralığı: Yılda 4 Sayı
  • Yayıncı: Yıldız Teknik Üniversitesi
Arşiv
Sayıdaki Diğer Makaleler

Canser BİLİR, Cengiz GÜNGÖR, Özgür KÖKALAN

Zeynep Nihan BERBERLER

Saadettin Erhan KESEN, Muzaffer ALIM

Serhat GÖKKAN, Betül YILMAZ, Caner ÖZDEMİR

Engin GÜCÜYEN, Recep Tuğrul ERDEM, Ümit GÖKKUŞ

B. Johnson AKINBO, Bakai I. OLAJUWON

Berkay ERGENE, Çağın BOLAT

Ömer Faruk YILMAZ

Ali ABDALI, Kazem MAZLUMI, Amir BAGHERI

Nazan TOKATLI DEMIROK, Muhammet ARICI