Barbaros ATMACA, Mustafa ERGUN, Şevket ATEŞ

THE MOST APPROPRIATE EARTHQUAKE RECORD GROUPS FOR DYNAMIC ANALYSIS OF A BUILDING

In this paper, seven real earthquake records are scaled according to Eurocode 8 design acceleration spectrum by using SESCAP (Selection and Scaling Program). SESCAP is a scaling program based on time domain scaling method and developed by using MATLAB, GUI software. Real and scaled earthquake records are used for linear time history analyses of a six-storied reinforced concrete building modeled as spatial by SAP2000. Eurocode 8 allows the use of real earthquake records for linear and nonlinear time history analyses of structures. In the case of using three earthquake records in linear and nonlinear time history analyses, maximum results of structural responses are used for design of structures. If at least seven time history analyses are performed, the mean responses of the structures are taken into account rather than the maximum results. For the selection of maximum results of structural response from thirty five groups are created by calculating combination of threes of seven real and scaled earthquake records, and another group including all of the seven real and scaled earthquake records are created for selection of mean. Relative floor displacements along X axis of the building are preferred as structural response of the building in this study. It is seen that differences between mean value and maximum value of the relative floor displacements along X axis of the building induced by seven and three scaled earthquake records respectively are less than ones obtained from real earthquake records.

Keywords:

Scaling of earthquake records time history analysis, relative floor displacement, SESCAP.,

PDF

___

[1] Abrahamson, N.A. (1993), “Non-Stationary Spectral Matching Program RSPMATCH”, User Manual.
[2] Acevedo, A. (2003), ''Seismological Criteria for Selecting and Scaling Real Accelerograms for Use in Engineering Analysis and Design'', A Dissertation Submitted in Partial Fulfillment of the Requirements for the Master Degree in Earthquake Engineering, European School of Advanced Studies in Reduction of Seismic Risk, ROSE SCHOOL.
[3] Bayati, Z. and Soltani, M. (2016), “Ground Motion Selection and Scaling for Seismic Design of RC Frames against Collapse”, Earthquakes and Structures, 11(3): 445-459.
[4] Bolt, B. A. and Gregor, N. J. (1993), “Synthesized Strong Ground Motions for the Seismic Condition Assessment of the Eastern Portion of the San Francisco Bay Bridge”, Report UCB/EERC-93/12, University of California, Earthquake Engineering Research Center, Berkeley, CA.
[5] Bommer, J.J. and Acevedo, A. (2004), ''The Use of Real Earthquake Accelerograms asn Input to Dynamic Analysis'', Journal of Earthquake Engineering; 8(1):43-91.
[6] Cantagallo, C., Camataa, G. and Spaconeb, E. (2015), “Influence of Ground Motion Selection Methods on Seismic Directionality Effects”, Earthquakes and Structures, 8(1): 185-204.
[7] Ergün, M. (2013) “Scaling and application of earthquake ground motions” MSc. Dissertation; Karadeniz Technical University, Trabzon, Turkey.
[8] EUROCODE 8. (2003), Design of Structures for Earthquake Resistance. Part 1: General Rules, Seismic Actions and Rules for Buildings. Final Draft prEN 1998, European Committee for Standardization, Brussels.
[9] Fahjan, Y.M. (2008), “Türkiye Deprem Yönetmeliği (DBYBHY, 2007) Tasarım İvme Spektrumuna Uygun Gerçek Deprem Kayıtlarının Seçilmesi ve Ölçeklenmesi”, İMO Teknik Dergi, 4423-4444, Yazı 292.
[10] Fahjan, Y.M. (2010), “Selection, Scaling and Simulation of Input Ground Motion for Time History Analysis of Structures'', Seminar and Lunch on Earthquake Engineering and Historic Masonry.
[11] Fahjan, Y.M., Ozdemir, Z. and Keypour, H. (2007), “Procedures for Real Earthquake Time Histories Scaling and Application to Fit Iranian Design Spectra”, 5 th International Conference on Seismology and Earthquake Engineering (SEE5), Tehran, Iran. The Most Appropriate Earthquake Record … / Sigma J Eng & Nat Sci 36 (4), 1047-1079, 2018 1078
[12] Hachem, M.M., Mathias, N.J., Wang, Y.Y., Fajfar, P., Tsai, K.C., Ingham, J.M., OyarzoVera, C.A. and Lee, S. (2010), “An International Comparison of Ground Motion Selection Criteria for Seismic Design”, Joint IABSE–Fib Conference, Dubrovnik, Croatia.
[13] Iervolino, I. and Cornell, C.A. (2005), “Record Selection for Nonlinear Seismic Analysis of Structures”, Earthquake Spectra, 21(3), 685-713.
[14] Iervolino, I., Cosenza, E. and Galasso, C. (2009), “Shedding Some Light on Seismic Input Selection in Eurocode 8”, In: Eurocode 8 Perspectives from the Italian Standpoint Workshop, Doppiavoce, Napoli, Italy.
[15] Kayhan, A.H., Korkmaz, K.A. and Irfanoglu, A. (2011), “Selecting and Scaling Real Ground Motion Records Using Harmony Search Algorithm “, Soil Dynamics and Earthquake Engineering, 31, 941-953.
[16] Kurama, Y. and Farrow, K. (2003), “Ground motion scaling methods for different site conditions and structure characteristics”, Earthquake Eng. Struct. Dyn., 32(15), 2425– 2450.
[17] Lee, L.H., Lee, H.H. and Han, S.W. (2000), “Method of Selecting Design Earthquake Ground Motions for Tall Buildings”, The Structural Design of Tall Buildings, 9, 201-213.
[18] Lilhanand, K. and Tseng, W.S. (1988), “Development and Application of Realistic Earthquake Time Histories Compatible with Multiple-Damping Design Spectra”, In: Proceedings of 9th World Conference on Earthquake Engineering, Tokyo-Kyoto, Japan; II: 819-824.
[19] MathWorks, Graphical User Interfaces in MATLAB, The Language of Technical Computing, Version 7.10.0.499 (R2010a); 2010. , [20] MathWorks, MATLAB, The Language of Technical Computing, Version 7.10.0.499 (R2010a); 2010
[21] Morales-Esteban, A., Luis de Justo, J., Martinez-Alvarez, F. and Azanon, J.M. (2012), “Probabilistic Method to Select Calculation Accelerograms Based on Uniform Seismic Hazard Acceleration Response Spectra”, Soil Dynamic and Earthquake Engineering, 43, 174-185. [22] Mukherjee, S. and Gupta, V.K. (2002), “Wavelet-Based Generation of SpectrumCompatible Time-Histories”, Soil Dynamics and Earthquake Engineering, 22, 9, 799-804.
[23] Naeim, F., Alimoradi, A. and Pezeshk, S. (2004), “Selection and Scaling of Ground Motion Time Histories for Structural Design Using Genetic Algorithms”, Earthquake Spectra, 20(2), 413–426.
[24] Nau, M. and Hall, W.J. (1984), “Scaling methods for earthquake response spectra”, Journal of Structural Engineering; 110(7): 1533-1548.
[25] Ozdemir, Z. and Fahjan, Y.M. (2007), “Comparison of Time and Frequency Domain Scaling of Real Accelerograms to Match Earthquake Design Spectra”, In: Sixth National Conference on Earthquake Engineering, Istanbul, Turkey.
[26] Pacific Earthquake Engineering Research (PEER) Center, PEER Strong Motion Database, http://peer.berkeley.edu/smcat, 2006.
[27] Pavel, F. and Vacareanu, R. (2016), “Scaling of Ground Motions from Vrancea (Romania) Earthquakes”, Earthquakes and Structures, 11(3): 505-516.
[28] SAP2000, Integrated Finite Element Analysis and Design of Structures, Computers and Structures Inc, Berkeley, California, USA; 2008.
[29] Shama, A. (2012), “Spectrum Compatible Earthquake Ground Motions by Morlet Wavelet”, 20th Analysis and Computation Specialty Conference, ASCE.
[30] Takewaki, I. and Tsujimoto, H. (2011), “Scaling of Design Earthquake Ground Motions for Tall Buildings based on Drift and Input Energy Demands”, Earthquakes and Structures, 2(2): 171-187. B. Atmaca, M. Ergun, Ş. Ateş / Sigma J Eng & Nat Sci 36 (4), 1047-1079, 2018 1079
[31] Wang, G. (2010), “A Ground Motion Selection and Modification Method Preserving Characteristics and Aleatory Variability of Scenario Earthquakes”, 9th US National and 10th Canadian Conference on Earthquake Engineering, July 25-29.
[32] Wood, R.L. and Hutchinson, T.C. (2012), “Effects of Ground Motion Scaling on

Sigma Mühendislik ve Fen Bilimleri Dergisi-Cover

ISSN: 1304-7191
Yayın Aralığı: Yılda 4 Sayı
Yayıncı: Yıldız Teknik Üniversitesi

Arşiv