Hamed Akhtari SHISHAVAN, Iraj MIRZAEE, Nader POURMAHMOUD

NUMERICAL INVESTIGATION OF WAVES GENERATED BY OSCILLATING SIDEWALL OF A TANK: A LATTICE-BOLTZMANN STUDY

Tsunamis happen every year in the seas and the oceans throughout the world. These tidal waves propagate at high speeds and in various directions and, if they reach the shoreline, tremendous damage can occur to these areas as well as their structures and facilities. Therefore, understanding this complex phenomenon and predicting its behavior can mitigate such damages. In the present study, the Lattice-Boltzmann method (LBM) is utilized to simulate the phenomenon of wave formation in a tank. Considering seawater as viscous flow, the governing Navier-Stokes equations for shallow water along with the LBM is used to simulate water level. Wave generation is also created by simulating a tank that flushes its left wall and does it once again. The obtained results show small waves at early times which become more intense over time. Besides, the pressure at the end of the tank is at maximum and it consequently decreases as moves upwards. This reveals that hydrostatic pressure variations are due to fluid’s height. In addition, the effect of shaking sidewall angles on the waves is investigated. The simulation results demonstrate a significant rising trend in wave height attributable to angularization of the sidewall. Moreover, by 30o oblique, wave production amplifies but no change is observed in the wave height at distant points from the slope.

Keywords:

Lattice-Boltzmann Method tank wave, sidewall angle, oscillating motion,

PDF

___

[1] Imamura, F. and Iwase, H., (2004) A New Tsunami Numerical Simulation With Boussinesq-Type Equations Applied For The 1983 Nihonka-Chubu Earthquake Tsunami, Proc. APAC 2003Makuhari 12-13.
[2] Holthuijsen, L., H., (2007) Waves in Oceanic and Coastal Waters. Cambridge University Press, Chap. 2, 3.
[3] Zheng X. Y., Moan T. and Quek S.T, (2007) Non-Gaussian Random Wave Simulation by Two-Dimensional Fourier Transform and Linear Oscillator Response to Morison Force, Journal of Offshore Mechanics and Arctic Engineering 129, 327-334.
[4] Valipour, A., Zoroufi, M., Yeganeh-Bakhtiary, A., (2008) Wave and Current Induced Cumulative Fatigue Damage Assessment for Offshore Pipeline on Free Span, 27th International Conference on Offshore Mechanics and Arctic Engineering, OMAE 2008, 293-299, 57317, OMAE 2008, Estoril, Portugal.
[5] Longuet-Higgins, M., Cokelet, E.D., (1976) The Deformation of Steep Surface Waves on Water: I. A Numerical Method of Computation, Proc. R. Soc. London, A 350, 1–26.
[6] Lin, W. M., (1984) Nonlinear Motion of The Free Surface Near A Moving Body, PhD thesis, Massachusetts Institute of Technology. Dept. of Ocean Engineering.
[7] Celebi, M.S., Kim, M.H., Beck, R.F., (1998) Fully Nonlinear 3-D Numerical Wave Tank Simulation, J. Ship Res. 42, 33–45.
[8] Grilli, S.T., Guyenne, P., Dias, F., (2001) A Fully Nonlinear Model for Three-Dimensional Overturning Waves Over Arbitrary Bottom, Int. J. Numer. Methods Fluids 35, 829–867.
[9] Dommermuth, D.G., Yue, D.K.P., (1987) Numerical Simulation of Nonlinear Axisymmetric Flows with A Free Surface, J. Fluid Mech.178, 195–219.
[10] Pourmahmoud, N., Sepehrian Azar, S. and Hassanzadeh, A., (2014) Numerical Simulation of Secondary Vortex Chamber Effect on The Cooling Capacity Enhancement of Vortex Tube, Heat Mass Trans. 50, 1225-1236.
[11] Khodayari Bavil, A. and Razavi, S.E., (2017) On the Thermo Flow Behavior in A Rectangular Channel with Skewed Circular Ribs, Mech. & Ind. 18, 225-230.
[12] Ghafouri, A. and Hassanzadeh, A., (2017) Numerical Study of Red Blood Cell Motion and Deformation Through A Michrochannel Using Lattice Boltzmann-Immersed Boundary Method, J. the Brazilian Soc. Mech. Sci. and Eng. 39, 1873-1882.
[13] Pourmahmoud, N., Hassanzadeh, A. and Moutaby, O., (2014) Numerical Investigation of Operating Pressure Effects on the Performance of A Vortex Tube, Therm. Sci. 18, 507-520.
[14] Pourmahmoud, N., Izady, A., Hassanzadeh, A. and Jahangiramini, A., (2014) Computational Fluid Dynamics Analysis Of The Influence of Injection Nozzle Lateral Outflow on The Performance of Ranque-Hilsch Vortex Tube, Therm. Sci. 18, 1191-1201.
[15] Akhtari, A., Mirzaee, I. and Pourmahmoud, N., (2019) Lattice Boltzmann Simulation of Blood Flow Properties and Vessel Geometry in an Open and Closed Vessel: A Numerical Study”, Scientia Iranica 26 (6), 3283-3292.
[16] Wang, H., Cater, J., Liu, H., Ding, X. and Huang, W., (2018) A Lattice Boltzmann Model For Solute Transport in Open Channel Flow, J. of Hydrology 556, 419-426.
[17] Navidbakhsh, M. Rezazadeh, M. An Immersed Boundary-Lattice Boltzmann Model for Simulation of Malaria-Infected Red Blood Cell in Micro-Channel, Scientia Iranica 19(5), pp. 1329–1336, (2012).
[18] Lecrivain, G., Rayan, R., Hurtado, A. and Hampel, U.,(2016) Using Quasi-DNS to Investigate the Deposition of Elongated Aerosol Particles in A Wavy Channel Flow, Comp. and Fluids 124, 78–85.
[19] Vi, A., Pouransari, H., Zamansky, R. and Mani, A., (2016) Particle-Laden Flows Forced by the Disperse Phase: Comparison Between Lagrangian and Eulerian Simulations, Int. J. of Multiphase Flow 79, 144 – 158.
[20] Henn, T., Thäter, G., Dörfler, W., Nirschl, H. and Krause, M.J., (2016) Parallel Dilute Particulate ﬂow Simulations in The Human Nasal Cavity, Comp. and Fluids 124, 197–207.
[21] McNamara, G. and Zanetti, G., (1998) Use of The Boltzmann Equation to Simulate Lattice Gas Automata, Physics of Review Letters 61, 23-32.
[22] Dean R. G., and Dalrymple R.A., (1993) Water Wave Mechanics for Engineers And Scientists, London: Word Scientific Publishing Co.

Sigma Mühendislik ve Fen Bilimleri Dergisi-Cover

ISSN: 1304-7191
Yayın Aralığı: Yılda 4 Sayı
Yayıncı: Yıldız Teknik Üniversitesi

Arşiv