Ömer KASAR

DESIGN AND IMPLEMENTATION OF COMPACT FOUR WAY WILKINSON POWER DIVIDER FOR UHF APPLICATIONS

In this study, a compact four equal way Wilkinson Power Divider (WPD) circuit design was designed for UHF applications. The circuit whose center frequency was selected as 0.8 GHz operates between the frequencies of 0.54-1.08 GHz and has a bandwidth of approximately 67.5%. The length of each outlet way has been curved to take up less space in the circuit. In this respect, the proposed WPD has a compact structure with high applicability. A butterfly stub, the length of which was determined by parameter sweep, has been placed in the input for the purpose of matching impedance. The simulation and measurement results of the designed circuit were well aligned with each other below 15 dB Return Loss and Isolation. In addition, 0.3 dB Insertion Loss was obtained on the output ways. It has been calculated that the proposed four-way power divider takes about 40% less space than the conventional circuit design.

Keywords:

Wilkinson power divider, compact WPD four way power divider,

PDF

___

[1] O. Kasar, M. Kahriman, and M. A. Gozel, "Application of ultra wideband RF energy harvesting by using multisection Wilkinson power combiner," International Journal of RF and Microwave Computer‐Aided Engineering, vol. 29, no. 1, pp. 1-8, 2019.
[2] K. A. A. Shamaileh, A. M. Qaroot, and N. Dib, "Design of N-way power divider similar to the Bagley polygon divider with an even number of output ports," Progress In Electromagnetics Research, vol. 20, no. 1, pp. 83-93, 2011.
[3] H. Younesiraad and M. Bemani, "Dual-Band 4-Way Wilkinson Power Divider Based on Improved Simplified Composite Right and Left Handed Transmission Lines," Applied Computational Electromagnetics Society Journal, vol. 31, no. 1, pp. 39-44, 2016.
[4] O. Hussein, K. Al Shamaileh, V. Devabhaktuni, and P. Aaen, "Wideband impedance-varying n-way wilkinson power divider/combiner for rf power amplifiers," in 88th ARFTG Microwave Measurement Conference (ARFTG), USA, 2016.
[5] D. M. Pozar, Microwave Engineering, 3rd ed. New York, USA: Wiley, 2006.
[6] K. Cheng and C. Law, "A novel approach to the design and implementation of dual-band power divider," IEEE Trans. Microw. Theory Tech., vol. 56, no. 2, pp. 487-492, 2008.
[7] I. E. Uchendu and J. R. Kelly, "Ultrawide isolation bandwidth compensated power divider for UWB applications," Microw. Opt. Technol. Lett., vol. 59, no. 12, pp. 3177-3180, 2017.
[8] O. Kasar, M. Kahriman, and M. A. Gozel, "A New Multi Stepped Real Impedance Matching Method with Euler Polynomials and its Application on Transmission Line," Journal of Engineering Sciences and Design, vol. 5, no. 3, pp. 547-552, 2017.
[9] M. Bemani and S. Nikmehr, "Nonradiating arbitrary dual-band equal and unequal 1: 4 series power dividers based on CRLH-TL structures," IEEE Transactions on Industrial Electronics, vol. 61, no. 3, pp. 1223-1234, 2014.
[10] P. Mahouti, M. A. Belen, H. P. Partal, S. Demirel, and F. Günes, "Miniaturization with dumbbell shaped defected ground structure for power divider designs using Sonnet," in 2015 31st International Review of Progress in Applied Computational Electromagnetics (ACES), 2015: IEEE, pp. 1-2.
[11] O. Kasar and M. Kahriman, "A theoretical design of ultra‐wideband multisection Wilkinson power divider using Euler polynomials," Microwave and Optical Technology Letters, vol. 62, no. 12, pp. 1-7, 2020.
[12] H. Oraizi and A. Yousefi, "Optimum design of a wideband planar N-way fork power divider with arbitrary power division and input-to-output impedance matching," AEU-International Journal of Electronics and Communications, vol. 79, no. 1, pp. 83-93, 2017.
[13] C. Zhu, J. Xu, W. Kang, and W. Wu, "Microstrip multifunctional reconfigurable wideband filtering power divider with tunable center frequency, bandwidth, and power division," IEEE Trans. Microw. Theory Tech., vol. 66, no. 6, pp. 2800-2813, 2018.
[14] T. Yu, "Design of Length-Saving Multiway Wilkinson Power Dividers," IEEE Access, vol. 6, no. 3, pp. 14093-14105, 2018.
[15] M. A. Belen, P. Mahouti, F. Güneş, and H. Partal, "Design and Implementation of Doppler Microwave Motion Sensor for Indoor Application," Sigma Journal of Engineering and Natural Sciences, vol. 36, no. 3, pp. 849-859, 2018.
[16] M. A. Belen, F. Güneş, S. Demirel, and P. Mahouti, "A deterministic approach for designing flat gain ultra-wideband LNAs," in 2014 20th International Conference on Microwaves, Radar and Wireless Communications (MIKON), 2014: IEEE, pp. 1-4.
[17] A. Moulay and T. Djerafi, "Wilkinson Power Divider With Fixed Width Substrate-Integrated Waveguide Line and a Distributed Isolation Resistance," IEEE Microwave and Wireless Components Letters, vol. 28, no. 2, pp. 114-116, 2018.
[18] V. Tas and A. Atalar, "An optimized isolation network for the Wilkinson divider," IEEE Transactions on Microwave Theory and Techniques, vol. 62, no. 12, pp. 3393-3402, 2014.
[19] J.-L. Li and B.-G. Yu, "Numerical study and experimental validation of a four-way feeding network with 45 deg broadband phase shifts for antenna array applications," Journal of Electrical Engineering, vol. 70, no. 5, pp. 400-405, 2019.
[20] Z. Qian and G. Zhang, "Design of A Compact Four-way Filtering Wilkinson Power Divider with Satisfactory Performance," in 2019 IEEE Asia-Pacific Microwave Conference (APMC), 2019: IEEE, pp. 1691-1693.
[21] C. A. Balanis, Antenna theory, analysis and design. New York: Wiley, 2005.
[22] P. Singh, S. Basu, and Y. Wang, "Coupled line power divider with compact size and bandpass response," Electronics Letters, vol. 45, no. 17, pp. 892-894, 2009.