TAM ZAMANINDA ÜRETİM FELSEFİNE DAYALI BİR SERİ ÜRETİM HATTININ SİMÜLASYON TEKNİĞİYLE PERFORMANS ANALİZİ

Literatürde tam zamanında üretim sistemi konusunda siparişlerin tek tip üründen oluştuğu varsayılmıştır. Bu çalışmada ise literatürden farklı olarak siparişlerin farklı ürün bilgilerini içerebildiği üretim sistemi üzerinde durulmuştur. Kanban kartları ile çalışan bir akış tipi üretim hattı çeşitli varsayımlar altında SIMAN dili kullanılarak modellenmiştir. Çeşitli faktörler belirlenerek üç farklı deney seti oluşturulmuştur. Bu deney setleri ile faktörlerdeki değişikliklerin etkisi gözlemlenmiştir. Faktörlerdeki değişimin etkisini gözlemlemek için farklı performans ölçütleri belirlenmiştir. Sonuçlar istatistiksel olarak yorumlanmış ve analiz edilmiştir.

Performance Analysis of a Serial Production Line Based on Just in-Time Phylosophy Using Simulation Technique

In the literature, it is assumed that the orders are made of a single type of product in a justin-time production system. In this study, contrary to the literature, the production system in which orders can contain different product information is studied. A serial production line system working with kanban cards is modeled using the SIMAN language under various assumptions. Three different experiment clusters are designed by determining various factors. The effects of changes in factors are observed with these experimental clusters. Different performance measures are identified to observe the effect of change in factors. Findings of experimental results are reported.

PDF

___

Azadeh, A., B. Bidokhti, S.M.R. Sakkaki, 2005. Design of practical optimum JIT systems by integration of computer simulation and analysis of variance, Computers & Industrial Engineering, 49: 504–519
Baykoç, Ö. F., Serpil Erol, 1998. Simulation modelling and analysis of a JIT production system, Int. J. Production Economics, 55: 203-212
Ezema, C. N., Eric C. Okafor, Christiana C. Okezie, 2017. Industrial design and simulation of a JIT material handling system, Ezema et al., Cogent Engineering, 4: 1292864
Green Jr, K. W., R. Anthony Inman, Laura M. Birou, Dwayne Whitten 2014. Total JIT (T-JIT) and its impact on supply chain competency and organizational performance, Int. J.Production Economics, 147: 125–135
Güneri, A.F., A. Kuzu, A. Taskin Gumus, 2008. Flexible kanbans to enhance volume flexibility in a JIT environment: a simulation based comparison via ANNs, International Journal of Production Research 47: 6807–6819
Huang, P. Y., Rees, L. P. and Taylor, B. W., 1983. A simulation analysis of the Japanese JIT technique (with kanbans) for a multiline. Multistage Production System, Decision Sciences, 14: 326-343.
Hum, S. H., Chee-Kwong Lee, 1998. JIT Scheduling Rules: a Simulation Evaluation, Omega, Int. J. Mgmt Sci., Vol. 26, No. 3, pp. 381-395
Husseini, S.M.M., O’Brien, C., and Hosseini, S.T., 2006. A method to enhance volume flexibility in JIT production control. International Journal of Production Economics, 104 (2), 653–665.
Jeong, W. S., Soowon Chang, JeongWook Son, June-Seong Yi, 2016. BIM-Integrated Construction Operation Simulation for Just-In-Time Production Management, Sustainability, 8: 1106
Kong, L., Heng Li, Hanbin Luoa, Lieyun Ding, Xiaochun Luo, Martin Skitmore, 2017. Optimal singlemachine batch scheduling for the manufacture, transportation and JIT assembly of precast construction with changeover costs within due dates, Automation in Construction, 81: 34–43
Maiga, A. S., Fred A. Jacobs, 2009. JIT performance effects: A research note, Advances in International Accounting, 25: 183–189
Pisuchpen, R. 2012. Integration of JIT flexible manufacturing, assembly and disassembly using a simulation approach, Emerald Insight, Vol. 32 Issue: 1, pp.51-61
Sandanayake, Y.G., C.F. Oduoza, D.G. Proverbs, 2008. A systematic modelling and simulation pproach for JIT performance optimisation, Robotics and Computer-Integrated Manufacturing, 24: 735– 743
Savsar, M., Abdullah Al-Jawinib, 1995. Simulation analysis of just-in-time production systems, Int. J. Production Economics, 42: 67-78
Torkul, O., Esra Kurt, 2001. Tam Zamanında İmalat Ortamında Sıralama Kurallarının Karşılaştırılması İçin Bir Benzetim Modeli, SAÜ Fen Bilimleri Enstitüsü Dergisi, 5.Cilt, 1.Sayı: 21-27
Wang, Y. C., Toly Chen, Hsiangtsai Chiang, Hui-Chen Pan, 2016, A simulation analysis of part launching and order collection decisions for a flexible manufacturing system, Simulation Modelling Practice and Theory, 69: 80–91
Wielgama, P. S., & Mills, R. G. S., 1995. Use of simulation in the design of a JIT system, International Journal of Operations and Production Management, 15(9)