On the axial crush performance of PVC foam-filled aluminum/CFRP hybrid circular tube

In this study, an experimental investigation was carried out to improve the energy absorption capability of the circular aluminum tubes. For this purpose, different specimen configurations such as polyvinylchloride (PVC) foam-filled, empty hybrid (strengthened with CFRP) and PVC foam-filled hybrid tubes were prepared and tested under axial compression. It is noted from the experiments that the contribution of foam filling maximized when it was used with CFRP together. The results revealed that energy absorption capacity (EAC) of the foam-filled hybrid tube was 2.7 times of the base tube. Moreover, the specific energy absorption (SEA) value enhanced almost 70% compared to that of the base tube and reached 34.9 J/gr.

PDF

___

[1] A. Pugsley, “The large-scale crumpling of thin cylindrical columns,” Quarterly Journal of Mechanics and Applied Mathematics, vol. 13, no. 1, pp. 1–9, 1960.

[2] S. R. Reid, T. Y. Reddy, and M. D. Gray, “Static and dynamic axial crushing of foamfilled sheet metal tubes,” International Journal of Mechanical Sciences, vol. 28, no. 5, pp. 295–322, 1986.

[3] D. Al Galib and A. Limam, “Experimental and numerical investigation of static and dynamic axial crushing of circular aluminum tubes,” Thin-Walled Structures, vol. 42, no. 8, pp. 1103–1137, 2004.

[4] A. A. Singace, H. Elsobky, and T. Y. Reddy, “On the eccentricity factor in the progressive crushing of tubes,” International Journal of Solids and Structures, vol. 32, no. 24, pp. 3589–3602, 1995.

[5] A. A. Alghamdi, “Collapsible impact energy absorbers: an overview,” ThinWalled Structures, vol. 39, no. 2, pp. 189– 213, 2001.

[6] J. Zhang, N. Kikuchi, V. Li, A. Yee, and G. Nusholtz, “Constitutive modeling of polymeric foam material subjected to dynamic crash loading,” International Journal of Impact Engineering, vol. 21, no. 5, pp. 369–386, 2002.

[7] S. A. Meguid, M. S. Attia, and A. Monfort, “On the crush behaviour of ultralight foamfilled structures,” Materials & Design, vol. 25, pp. 183–189, 2004.

[8] A. K. Toksoy and M. Güden, “The strengthening effect of polystyrene foam filling in aluminum thin-walled cylindrical tubes,” Thin-Walled Structures, vol. 43, no. 2, pp. 333–350, 2005.

[9] R. A. Alia, Z. W. Guan, A. K. Haldar, and W. J. Cantwell, “A numerical study of the energy-absorption characteristics of metal polymer foams,” Journal of Sandwich Structures & Materials, vol. 18, no. 5, pp. 597–623, 2016.

[10] H. C. Kim, D. K. Shin, J. J. Lee, and J. B. Kwon, “Crashworthiness of aluminum/CFRP square hollow section beam under axial impact loading for crash box application,” Composite Structure, vol. 112, pp. 1–10, 2014.

[11] Q. Liu, J. Ma, Z. He, Z. Hu, and D. Hui, “Energy absorption of bio-inspired multicell CFRP and aluminum square tubes,” Composites Part B: Engineering, vol.121, pp. 134–144, 2017.

[12] M. R. Bambach, M. Elchalakani, and X. L. Zhao, “Composite steel – CFRP SHS tubes under axial impact,” Composite Structures, vol. 87, no. 3, pp. 282–292, 2009.

[13] M. Guden, S. Yüksel, A. Taşdemirci, and M. Tanoğlu, “Effect of aluminum closedcell foam filling on the quasi-static axial crush performance of glass fiber reinforced polyester composite and aluminum/composite hybrid tubes,” Composite Structures, vol. 81, no. 4, pp. 480–490, 2007.

[14] P. Taylor, N. Swaminathan, and R. C. Averill, “Contribution of failure mechanisms to crush energy absorption in a composite tube,” Mechanics of Advanced Materials and Structures, vol. 13, no. 1, pp. 51–59, 2006.

[15] M. R. Bambach and M. Elchalakani, “Plastic mechanism analysis of steel SHS strengthened with CFRP under large axial deformation,” vol. 45, pp. 159–170, 2007.

[16] P. Thornton, “Energy absorption by foam filled structures,” SAE Technical Paper Series, 1980.

[17] T. Y. Reddy and R. J. Wall, “Axial compression of foam-filled thin-walled circular tubes,” International Journal of Impact Engineering, vol. 7, no. 2, pp. 151– 166, 1988.

[18] M. Seitzberger, F. G. Rammerstorfer, H. P. Degischer, and R. Gradinger, “Crushing of axially compressed steel tubes filled with aluminium foam,” Acta Mechanica, vol. 125, no. 1, pp. 93–105, 1997.

[19] H. R. Zarei and M. Kroger, “Optimization of the foam-filled aluminum tubes for crush box application,” Thin-Walled Structures, vol. 46, no. 2, pp. 214–221, 2008.

[20] A. Darvizeh, M. Darvizeh, R. Ansari, and A. Meshkinzar, “Effect of low density, low strength polyurethane foam on the energy absorption characteristics of circumferentially grooved thick-walled circular tubes,” Thin-Walled Structures, vol. 71, pp. 81–90, 2013.

[21] M. Güden, A. K. Toksoy, and H. Kavi, “Experimental investigation of interaction effects in foam-filled thin-walled aluminum tubes,” Journal of Materials Science, vol. 41, no. 19, pp. 6417–6424, 2006.

[22] S. R. Guillow, G. Lu, and R. H. Grzebieta, “Quasi-static axial compression of thinwalled circular aluminium tubes,” International Journal of Mechanical Sciences, vol. 43, no. 9, pp. 2103–2123, 2001.

[23] S. R. Reid and T. Y. Reddy, “Static and dynamic crushing of tapered sheet metal tubes of rectangular cross-section,” International Journal of Mechanical Sciences, vol. 28, no. 9, pp. 623–637, 1986.