Metot Zaman Ölçümü (MZÖ) yöntemi ile üretim süresinin iyileştirilmesi: beyaz eşya yan sanayisinde bir uygulama
Günümüzün dinamik rekabet koşullarında işletmeler için maliyetlerin azaltılması ve üretim süreçlerinde verimliliğin arttırılması bir zorunluluk haline gelmiştir. Bu bağlamda üretim sürelerinin önceden belirlenmesi ve mümkünse iyileştirilmesi büyük önem taşımaktadır. Üretim sürelerinin belirlenmesi için kullanılan yöntemlerden birisi de Metot Zaman Ölçümü (MZÖ) yöntemidir. MZÖ, el ile yapılan bir işi bu işi yapmak için gereken temel vücut hareketleri türünden inceleyerek, hareketler için önceden bir standart süre ortaya koyan iş ölçüm yöntemidir. Bu çalışmada, MZÖ yöntemi ile beyaz eşya yan sanayisinde faaliyet gösteren bir işletme için üretim sürelerinin iyileştirilmesi amaçlanmıştır. Bu yöntem yardımıyla en küçük hareketler bile hassas bir şekilde incelendiğinden küçük iyileştirme fırsatları yakalanarak daha verimli çalışan bir üretim hattı elde edilmesi hedeflenmiştir. Çalışma sonucunda ele alınan ürün için iyileştirme öncesindeki üretim süresi ile iyileştirmeden sonraki üretim süresi karşılaştırılarak günlük üretim miktarında meydana gelen artış ortaya konulmuştur.
Improvement of production time with Method Time Measurement (MTM) method: a case study at white goods sub-ındustry
It has become a necessity to reduce costs and improve efficiency in the production process for enterprises in today's dynamic competitive environment. In this context, pre-determining and improving the production time has great importance. Method Time Measurement (MTM) is a measurement method, which examines a manual work in the context of basic body motions and determines a standard time for these motions. In this study, it is aimed to improve production times for a company which operates in white goods sub-industry with MTM method. Besides, it is aimed to obtain a more efficient production line by handing little improvement oppurtinities via this method as a result of examining the smallest motions sensitively. At the end of study, the production times which are obtained before improvement and after improvement are compared and the increase in daily production amount is revealed.
___
- [1] S. Seifermann, J. Böllhoff, J. Metternich, A. Bellaghnach, "Evaluation of Work Measurement Concepts for a Cellular Manufacturing Reference Line to enable Low Cost Automation for Lean Machining" Procedia CIRP, cilt 17, pp. 588 - 593, 2014.
- [2] H. Yüksel, Üretim/İşlemler Yönetimi Temel Kavramlar, Nobel Yayıncılık, Ankara, 2013.
- [3] E. Öztemel, Endüstri Mühendisliğine Giriş, Papatya Yayıncılık, İstanbul, 2009.
- [4] U. Bahçıvancılar, "Validation of Methods Time Measurement Data", Yüksek Lisans Tezi, Orta Doğu Teknik Üniversitesi, Fen Bilimleri Enstitüsü, Ankara, 2012.
- [5] J. Laring, M. Forsman,, R. Kadefors, R. Ortengren, "MTM-based ergonomic workload analysis", International Journal of Industrial Ergonomics, cilt 30, pp. 135-148, 2002.
- [6] R. Dossett, "Computer application of a naturallanguage predetermined motion time system", Computers & Industrial Engineering, cilt 23, no 1-4, pp.319-322, 1992.
- [7] A.M. Genaidy, A. Agrawal, A. Mital, "Computerized predetermined motion-time systems in manufacturing industries", Computers & Industrial Engineering, cilt 18, no 4, pp. 571-584, 1990.
- [8] L.Fernandez-Sanz, J.J. Escribano, J.R. Hilera, "Software operation time evaluation based on MTM", Advances in Engineering Software, cilt 40, pp. 583-592, 2009.
- [9] G. Di Gironimo, C. Di Martino, A. Lanzotti, A. Marzano, G. Russo, "Improving MTMUAS to predetermine automotive maintenance times", Int J Interact Des Manuf, cilt. 6, pp. 265- 273, 2012.
- [10] M. Bures, P. Pivodova, "Comparison of Time Standardization Methods on the Basis of Real Experiment", Procedia Engineering, cilt 100, pp. 466 - 474, 2015.
- [11] S. Işık Uludağ, "Hazır Giyim Sanayiinde Klasik Erkek Gömleği Üretiminin Standart Sürelerinin MTM Yöntemi İle Belirlenmesi", Yüksek Lisans Tezi, Marmara Üniversitesi Fen Bilimleri Enstitüsü, İstanbul, 2005.