Dynamic Response of an Euler-Bernoulli Beam Coupled with a Tuned Mass Damper under Moving Load Excitation

In this study, dynamic analysis of Euler-Bernoulli beam and Tuned Mass Damper (TMD) interaction problem under the effect of moving load was carried out by the mode superposition method. After the differential equations of TMD are derived by Lagrange method, beams and TMD motion equations are integrated and matrices belonging to the motion equation of the whole system are obtained. The motion equation of the system is solved in the time domain using the Newmark-β algorithm. The effect of TMD on damping vibrations has been examined in terms of parameters such as frequency, damping rate, mass ratio and moving load speed. In addition, the effect of TMD on Dynamic Amplification Factor (DAF) was examined. As a result, with the TMD application carried out in this study, approximately 14% to 24% improvement was achieved in beam deformations and accelerations.Keywords: TMD, moving load, Newmark-Beta, DAF

PDF

___

[1] I. Esen and M.A. Koç, “Optimization of a passive vibration absorber for a barrel using the genetic algorithm.,” Expert Systems with Applications. vol. 42, no. 2, p. 2015.
[2] M.A. Koç, İ. Esen, Y. Çay, et al., “Vibration Suppression of Vehicle-BridgeInteraction System using Multiple Tuned Mass Dampers.,” In: 5th International Symposium on Innovative Technologies in Engineering and Science. pp. 1–8 (2017).
[3] H.C. Kwon, M.C. Kim, and I.W. Lee, “Vibration control of bridges under moving loads.,” Computers & Structures. vol. 66, no. 4, pp. 473–480, 1998.
[4] Mahsa Moghaddas, Finite Element Analysis and Passive Vibration Control of the Timoshenko Beam Traversed by a Moving Vehicle Using an Optimized Tuned Mass Damper., 2008.
[5] A.C. Mitra, G.J. Desai, S.R. Patwardhan, P.H. Shirke, W.M.H. Kurne, and N. Banerjee, “Optimization of Passive Vehicle Suspension System by Genetic Algorithm.,” Procedia Engineering. vol. 144, pp. 1158–1166, 2016.
[6] M. Omar, M.M. El-kassaby, and W. Abdelghaffar, “Parametric numerical study of electrohydraulic active suspension performance against passive suspension.,” Alexandria Engineering Journal. vol. 57, no. 4, pp. 3609–3614, 2018.
[7] D. Younesian, E. Esmailzadeh, and R. Sedaghati, “Passive vibration control of beams subjected to random excitations with peaked PSD.,” JVC/Journal of Vibration and Control. vol. 12, no. 9, pp. 941–953, 2006.
[8] Q. Zhu, L. Li, C.J. Chen, C.Z. Liu, and G. Di Hu, “A Low-Cost Lateral Active Suspension System of the High-Speed Train for Ride Quality Based on the Resonant Control Method.,” IEEE Transactions on Industrial Electronics. vol. 65, no. 5, pp. 4187–4196, 2018.
[9] I. Eski and Ş. Yildirim, “Vibration control of vehicle active suspension system using a new robust neural network control system.,” Simulation Modelling Practice and Theory. vol. 17, no. 5, pp. 778–793, 2009.
[10] A.J. Yakel and A. Azizinamini, “TrainInduced Vibration Control of High-Speed Railway Bridges Equipped with Multiple Tuned Mass Dampers.,” Journal of Bridge Engineering. vol. 10, no. 1, pp. 28–38, 2005.
[11] M. Moghaddas, E. Esmailzadeh, R. Sedaghati, and P. Khosravi, “Vibration control of Timoshenko beam traversed by moving vehicle using optimized tuned mass damper.,” Journal of Vibration and Control. vol. 18, no. 6, pp. 757–773, 2012.
[12] F. Yang, R. Sedaghati, and E. Esmailzadeh, “Optimal vibration suppression of timoshenko beam with tuned-mass-damper using finite element method.,” Journal of Vibration and Acoustics, Transactions of the ASME. vol. 131, no. 3, pp. 0310061–0310068, 2009.
[13] E. Esmailzadeh and N. Jalili, “Optimum design of vibration absorbers for structurally damped Timoshenko beams.,” Journal of Vibration and Acoustics, Transactions of the ASME. vol. 120, no. 4, pp. 833–841, 1998.
[14] J.-J. Wu, “Study on the inertia effect of helical spring of the absorber on suppressing the dynamic responses of a beam subjected to a moving load.,” Journal of Sound and Vibration. vol. 297, no. 3–5, pp. 981–999, 2006.
[15] J.P. DEN HARTOG, Mechanical Vibrations. , NEW YORK, 2008.
[16] A. Greco and A. Santini, “Dynamic response of a flexural non-classically damped continuous beam under moving loadings.,” Computers and Structures. vol. 80, no. 26, pp. 1945–1953, 2002.