Theoretical And Mathematical Analysis Of Double- Circuit Solar Station With Thermo Siphon Circulation

This article discusses the mathematical models of the individual structures and modes of operation of a double-circuit solar collector with thermo siphon circulation. To perform this task, we considered a new design of a flat solar collector with thermo siphon circulation, in which the heat transfer coefficient was increased by eliminating additional partitions between the panel and thermal insulation. The efficiency of the solar collector is achieved due to the presence of the metering tank and the heat pump in the tank, where the condenser and evaporator are made in the form of a “spiral in a spiral” type heat exchanger, and the heat exchanger pipelines are placed one above the other, which allows increasing the area and intensity of heat exchange. The result of this work is a theoretical and mathematical analysis of the unsteady thermal regime of flat solar collectors on the modes of operation under consideration. Based on the results of the analysis, it is possible to optimize individual structural elements, as well as to predict the thermal regime and select alternative solutions for the design of flat solar collectors and the choice of operating modes.

Theoretical And Mathematical Analysis Of Double- Circuit Solar Station With Thermo Siphon Circulation

This article discusses the mathematical models of the individual structures and modes of operation of a double-circuit solar collector with thermo siphon circulation. To perform this task, we considered a new design of a flat solar collector with thermo siphon circulation, in which the heat transfer coefficient was increased by eliminating additional partitions between the panel and thermal insulation. The efficiency of the solar collector is achieved due to the presence of the metering tank and the heat pump in the tank, where the condenser and evaporator are made in the form of a “spiral in a spiral” type heat exchanger, and the heat exchanger pipelines are placed one above the other, which allows increasing the area and intensity of heat exchange. The result of this work is a theoretical and mathematical analysis of the unsteady thermal regime of flat solar collectors on the modes of operation under consideration. Based on the results of the analysis, it is possible to optimize individual structural elements, as well as to predict the thermal regime and select alternative solutions for the design of flat solar collectors and the choice of operating modes.

___

  • [1] J. R. Wixson. Function Analysis and Decomposition Using Function Analysis Systems Technique. International Council on Systems Engineering Annual Conference (INCOSE ’99) June 6, 1999 – June 10, 1999
 [2] Tomas, M.; Vladimir, Z.; Juliane, M. Detailed modeling of solar flat-plate collectors with design tool kolektor 2.2, building simulation. In Eleventh International IBPSA Conference, Glasgow, Scotland; IBPSA: Loughborough, UK, 2009; 2289–2296. [3] Duffie, J.A.; Beckman, W.A. Solar Engineering of Thermal Processes, 2nd ed.; John Wiley & Sons, Inc.: New York, 1980; 23, 73–74, 95–101. [4] Koyuncu, T. Performance of various design of solar air heaters for crop drying applications. Renewable Energy 2006, 31, 1073–1088.
 [5] Kicsiny, R. Improved multiple linear regression based models for solar collectors. Renewable Energy 2016, 91, 224–232.
 [6] Gao, W.; Lin, W.; Liu, T.; Xia, C. Analytical and experimental studies on the thermal performance of cross-corrugated and flat plate solar air heaters. Applied Energy 2007, 84(4), 425–441. [7] Alvarez, A.; Cebaza, O.; Muñiz, M.C.; Varela, L.M. Experimental and numerical investigation of a flat-plate solar collector. Energy 2010, 35, 3707–3716.
 [8] Buzás, J.; Farkas, I.; Biró, A.; Németh, R. Modelling and simulation of a solar thermal system. Mathematics and Computers in Simulation 1998, 48, 33–46. [9] Chow, T.T.; He, W.; Ji, J. Hybrid photovoltaicthermosyphon water heating system for residential application. Solar Energy 2006, 80, 298–306.
 [10] Ji, J.; He, H.; Chow, T.; Pei, G.; He, W.; Liu, K. Distributed dynamic modeling and experimental study of PV evaporator in a PV/T solar-assisted heat pump. International Journal of Heat and Mass Transfer 2009, 52, 1365–1373. [11] Tiwari, A.; Sodha, M.S. Parametric study of various configurations of hybrid PV/thermal air collectors: Experimental validation of theoretical model. Solar Energy Materials and Solar Cells 2007, 91, 17–28.
 [12] Talbot, P.; Lhote, M.; Heilporn, C.; Schubert, A.; Willaert, F.-X.; Haut, B. Ventilated tunnel solar dryers for small-scale farmers communities: Theoretical and practical aspects. Drying Technology 2016, 34, 1162–1174. [13] Duffie, J.A.; Beckman, W.A. Solar Engineering of Thermal Processes; John Wiley Sons: Hoboken, NJ, USA, 1980; Chapter 12, pp. 487–497. [14] Prapas, D.E.; Veliannis, I.; Evangelopoulos, A.; Sotiropoulos, B.A. Large DHW solar systems with distributed storage tanks. Sol. Energy 1995, 35, 175–184. [15] Chang, K.C.; Lin, W.M.; Lee, T.S.; Chung, K.M. Local market of solar water heaters in Taiwan: Review and perspectives. Renew. Sustain. Energy Rev. 2009, 13, 2605–2612. [16] Lin, W.M.; Chang, K.C.; Liu, Y.M.; Chung, K.M. Field surveys of non-residential solar water heating systems in Taiwan. Energies 2012, 5, 258–269. [17] Karagiorgas, M.; Botzios, A.; Tsoutsos, T. Industrial solar thermal applications in Greece economic evaluation, quality requirements and case studies. Renew. Sustain. Energy Rev. 2001, 5, 157–173.
Politeknik Dergisi-Cover
  • ISSN: 1302-0900
  • Yayın Aralığı: Yılda 4 Sayı
  • Başlangıç: 1998
  • Yayıncı: GAZİ ÜNİVERSİTESİ
Sayıdaki Diğer Makaleler

Karayolu Ulaşımında Farklı Yol Kaplamalarının Çevresel Gürültü Seviyesine Katkılarının İncelenmesi: Adana Örneği

Zeki BOZKURT, Zeliha SELEK

Yağ Soğutmalı Kondenser Tasarımının Termostat Kontrollü Bir Soğutucuya Uyarlanması ve Performans Deneylerinin İncelenmesi

Bahadır ACAR

A New Perspective on The Numerical Solution for Fractional Klein Gordon Equation

Berat KARAAGAC, Yusuf UÇAR, N. Murat YAĞMURLU, Alaattin ESEN

Elektron Demet ile Işınlanmış PTCDA Arayüzey Tabakalı Au/PTCDA/n-Si Diyotların Elektriksel Özellikleri

UMUT AYDEMİR

Some Physical and Mechanical Properties of Impregnated Chestnut Wood with Natural and Chemical Agent Exposed to Outdoor Conditions

MEHMET YAŞAR, Mustafa ALTUNOK

Performance Evaluation of Bridges Under Scour by UAS Based Measurements

Orkan ÖZCAN

Benzilamin İnce Filmleri İle Kovalent Bir Şekilde Modifiye Edilmiş Silisyum Yüzeyleri Üzerinde Sitrat-Kaplı Altın Nanopartiküllerin Üretimi ve Karakterizasyonu

Ali YEŞİLDAĞ

Collision Avoidance Via Emergency Steering Warning System: A Driving Simulator Approach

Hasan ŞAHİN, Orhan ATABAY, ÖZGEN AKALIN

Denizli Travertenlerinde P ve S Dalga Hızları ile Bazı Fiziksel ve Tek Eksenli Sıkışma Dayanımı Özellikleri Arasındaki İlişkilerin Araştırılması

Sefer Beran ÇELİK, İbrahim ÇOBANOĞLU

Taguchi Metoduyla Belirlenen Kaynak Parametrelerinin API 5L X65 Boru Birleştirmelerinde Radyografik ve Makrografik İncelemeleri

HAKAN ADA, Cemil ÇETİNKAYA, Ahmet DURGUTLU