Synthesis and characterization of carboxymethyl shrimp chitosan (CMSCh) from waste shrimp shell
Chitin, the main component of shellfish such as crab and shrimp, is one of the most used biopolymers after cellulose. Today, although recycling of waste is becoming increasingly important, large quantities of seafood shells such as crab and shrimp are being destroyed around the world without much evaluation. Chitosan, which is non-toxic, biodegradable-biocompatible and has many application advantages compared to chitin, is used in many sectors, especially cosmetics, pharmaceuticals and agriculture, as it shows superior properties compared to other biopolymers in terms of chemical and physical properties. In this study, in order to evaluate waste shrimp shells (WSS), shrimp shells were first removed from their minerals and proteins by deproteinization, demineralization and deacetilization processes. Then, chitosan and carboxymethyl shrimp chitosan (CMSCh) were synthesized by isolation of chitin. The structures of Chitin-chitosan and CMSCh were characterized by spectroscopic methods (FT-IR, XRD and NMR) and the deacetylation degrees of them were calculated. Also, surface morphologies and thermal properties were analyzed by SEM and DTA-TG, respectively.
___
- [1]. Yeul V.S,, Ryalu S.S., “Unprecedented Chitin and Chitosan: A Chemical Overview”, Journal of Polymers and the Environment, 21, (2013), 606-614.
- [2]. Fazli Y., Shariatinia Z., “Controlled release of cefazolin sodium antibiotic drug from electrospun chitosan-polyethylene oxide nanofibrous Mats.” Materials Science and
Engineering: C, 71, (2017), 641-652.
- [3]. Zheng K., Xiao S., Li W., Wang W., Chena H., Yang F., Qina C., “Chitosan-accorn starch-eugenol edible film: Physico-chemical, barrier, antimicrobial, antioxidant and
structural properties”, International Journal of Biological Macromolecules, 135, (2019), 344-352.
- [4]. Shariatinia Z., “Carboxymethyl chitosan: Properties and biomedical applications”, International Journal of Biological Macromolecules, 120, (2018), 1406-1419.
- [5]. Mourya V.K., Inamdar N.N., Tiwari A., “Carboxymethyl chitosan and its applications”, Advanced Materials Letters, 1, (2010), 11-33.
- [6]. Bratskaya S., Privar Y., Nesterov D., Modin E., Kodess M., Slobodyuk A., Marinin D., Pestov A., “Chitosan Gels and Cryogels Cross-Linked with Diglycidyl Ethers of Ethylene
Glycol and Polyethylene Glycol in Acidic Media”, Biomacromolecules, 20, (2019, 1635−1643.
- [7]. Jimtaisong A., Saewan N., “Utilization of carboxymethyl chitosan in cosmetics”, International Journal of Cosmetic Science, 36, (2014), 12-21.
- [8]. Morandim-Giannetti A.A., Wecchi P.O., Jo Silverio P.A., Carlstron R., Bersanetti P.A., “Attainment and characterization of carboxymethyl chitosan hydrogels by enzymatic
cross-linking”, Journal of Thermal Analysis and Calorimetry, 138, (2019), 3635-3643.
- [9]. Chang K.L.B., Tsai G., “Response Surface Optimization and Kinetics of Isolating Chitin from Pink Shrimp (Solenocera melantho) Shell Waste”, Journal of Agicultural and
Food Chemistrv, 45, (1997), 1900-19004.
- [10].No H.K., Meyers J.S.P., Lee K.S., “Isolation and Characterization of Chitin from Crawfish Shell Waste”, Journal of Agicultural and Food Chemistry, 37, (1989), 575-579.
- [11]. Biskup R.C., Jarosinska D., Rokita B., Ulanski P., Rosiak J.M., “Determination Of Degree Of Deacetylation Of Chitosan-Comparision Of Methods”, Conference: New Aspects
of the Chemistry and Applications of Chitin and its Derivatives At: Warsow: XVII (2012).
- [12]. Bulut M.O., Elibüyük U., “Production of Chitosan the Crab Chitin”, Erzincan University Journal of Science and Technology, 10, (2017), 213-219.
- [13]. Kusuma H.S., Al-Sabani A.F., “Darmokoesoemo H. N,O-Carboxymethyl Chitosan: An Innovation in New Natural Preservative from Shrimp Shell Waste with a Nutritional
Value and Health Orientation”, Procedia Food Science, 3, (2015), 35-51.
- [14]. Muzzarelli R., Tarsi R., Filippini O., Giovanetti E., Biagini G., Varaldo P.E., “Antimicrobial properties of N-carboxybutyl chitosan”, Antimicrobial Agents And Chemotherapy, 34,
(1990), 2019-2023.
- [15].Estevinho B.N., Rocha F., Santos L., Alves A., “Micro encapsulation with chitosan by spray drying for industry applications-A review”, Trends in Food Science and
Technology” 31, (2013), 138-155.
- [16].No H.K., Lee K.S., Meyers S.P., “Correlation between physicochemical characteristics and binding capacities of chitosan products”, Journal of Food Science, 65, (2000),
1134-1137.
- [17]. Ali Z., Laghari A., Ansari A, Khuhawar M., “Synthesis and characterization of carboxymethyl chitosan and its effect on turbidity removal of river water”, Journal of
Chemical Technology & Biotechnology, 5, (2010), 72-79.
- [18]. Bidgoli H., Zamani A., Taherzadeh M., “Effect of carboxymethylation conditions on the water-binding capacity of chitosan-based superabsorbents”, Carbohydrate
Research 345, (2010), 2683-2689.
- [19]. Kartha V.G., Maharana T., Suryavanshi V., “Synthesis and Characterisation Of Carboxy Methyl Chitosan”, International Journal of Engineering Technology Science and
Research, 5, (2018), 2394-3386.
- [20]. Bukzem A.L., Signini R., dos Santos D.M., Liao L.M., Ascheri D.P.R., “Optimization of carboxymethyl chitosan synthesis using responsesurface methodology and desirability
function”, International Journal of Biological Macromolecules, 85, 2(2016), 615-624.
- [21]. Zo S., Choi S., Kim H., Shin E., Han S., “Synthesis and Characterization of Carboxymethyl Chitosan Scaffolds Grafted with Waterborne Polyurethane”, Journal of
Nanoscience and Nanotechnology, 20, (2020), 5014-5018.
- [22]. Vaghani S.S., Patel M.M., Satish C.S., Patel K.P., Jivani N.P., “Synthesis and characterization of carboxymethyl chitosan hydrogel: Application as site specific delivery for
lercanidipine hydrochloride”, Bulletin of Materials Science, 35, (2017), 1133-1142.
- [23]. Tzaneva D., Simitchiev A., Petkova N., Nenov V., Stoyanova A., Denev P., “Synthesis of Carboxymethyl Chitosan and its Rheological Behaviour in Pharmaceutical and
Cosmetic Emulsions”, Journal of Applied Pharmaceutical Science, 7, (2017), 070-078.
- [24]. Chen Z., Cao S., Wang H., Li Y., Kishen A., Deng X., Yang X., Wang Y., Cong C., Wang H., Zhang X., “Biomimetic Remineralization of Demineralized Dentine Using Scaffold of
CMC/ACP Nanocomplexes in an In Vitro Tooth Model of Deep Caries”, Plos One, 10, (2015), e0116553.
- [25]. Sanchez R., Alonso G., Valencia C., Franco J.M., “Rheological and TGA study of acylated chitosan gel-like dispersions in castor oil: Infuence of acyl substituent and
acylation protocol”, Chemical Engineering Research and Design, 100, (2015), 170-178.
- [26]. Wahid F., Yin J.J., Xue D.D., Xue H., Lu Y.S., Zhong C., Chu L.Q., “Synthesis and characterization of antibacterial carboxymethyl Chitosan/ZnO nanocomposite hydrogels”,
International Journal of Biological Macromolecules, 88, (2016), 273-279.
- [27]. Abreu F.R., Filho S.P.C., “Characteristics and properties of carboxymethyl chitosan”, Carbohydrate Polymers, 75, (2009), 214-221.
- [28]. Patale R.L., Patravale V.B., “O,N-Carboxymethyl Chitosan-Zinc Complex : A Novel Chitosan Complex with Enhanced Antimicrobial Activity”, Carbohydrate Polymers, 85,
(2011), 105-110.
- [29]. Pereira F.S., da Silva Agostini D.L., Job A.E., Gonzalez E.R.P., “Thermal studies of chitin-chitosan derivatives”, Journal of Thermal Analysis and Calorimetry, 114, (2013), 321-
327.