___

• Ackerman, M. B., & Ackerman, J. L. 2002. Smile analysis and design in the digital era. Journal of clinical orthodontics, 36(4), 221-236. Akyalcin, S., Cozad, B. E., English, J. D., Colville, C. D., & Laman, S. 2013. Diagnostic accuracy of impression-free digital models. American Journal of Orthodontics and Dentofacial Orthopedics, 144(6), 916-922. Al Mortadi, N., Eggbeer, D., Lewis J., & Williams RJ. 2012. CAD/CAM/AM applications in the manufacture of dental appliances. American Journal of Orthodontics and Dentofacial Orthopedics, 142(5), 727-733. Al Mortadi, N., Jones, Q., Eggbeer, D., Lewis, J., & Williams, R. J. 2015. Fabrication of a resin appliance with alloy components using digital technology without an analog impression. American Journal of Orthodontics and Dentofacial Orthopedics, 148(5), 862-867. Bae, M. J., Kim, J. Y., Park, J. T., Cha, J. Y., Kim, H. J., Yu, H. S., & Hwang, C. J. 2013. Accuracy of miniscrew surgical guides assessed from cone-beam computed tomography and digital models. American Journal of Orthodontics and Dentofacial Orthopedics, 143, 893–901. Barreto, M. S., Faber, J., Vogel, C. J., & Araujo, T. M. 2016. Reliability of digital orthodontic setups. The Angle Orthodontist, 86(2), 255-259. Breuning, K. H. 2017. Custom Appliance Fabrication and Transfer. Digital Planning and Custom Orthodontic Treatment.(eksiklik var) Brown, M. W., Koroluk, L., Ko, C. C., Zhang, K., Chen, M., & Nguyen, T. 2015. Effectiveness and efficiency of a CAD/CAM orthodontic bracket system. American Journal of Orthodontics and Dentofacial Orthopedics, 148(6), 1067-1074. Ciuffolo, F., Epifania, E., Duranti, G., De Luca, V., Raviglia, D., Rezza, S., & Festa, F. 2006. Rapid prototyping: a new method of preparing trays for indirect bonding. American Journal of Orthodontics and Dentofacial Orthopedics, 129(1), 75-77. Christensen, L. R., & Cope, J. B. 2018. Digital technology for indirect bonding. In Seminars in Orthodontics (Vol. 24, No. 4, pp. 451-460). WB Saunders. Coachman, C., Calamita, M. A., & Sesma, N. 2017. Dynamic documentation of the smile and the 2D/3D digital smile design process. Int J Periodontics Restorative Dent, 37(2), 183-193. Cousley, R. R., & Turner, M. J. 2014. Digital model planning and computerized fabrication of orthognathic surgery wafers. Journal of Orthodontics, 41(1), 38-45. Cousley, R. R., Bainbridge, M., & Rossouw, P. E. 2017. The accuracy of maxillary positioning using digital model planning and 3D printed wafers in bimaxillary orthognathic surgery. Journal of Orthodontics, 44(4), 256-267. Costalos, P.A., Sarraf, K., Cangialosi, T.J., & Efstratiadis, S. 2005. Evaluation of the accuracy of digital model analysis for the American Board of Orthodontics objective grading system for dental casts. Am J Orthod Dentofacial Orthop,128:624-9. Da Costa, J.B., McPharlin, R., Hilton, T., Ferracane, J.I., Wang, M. 2012. Comparison of two at-home whitening products of similar peroxide concentration and different delivery methods. Oper Dent, 37(4):333-9. De Riu, G., Meloni, S. M., Baj, A., Corda, A., Soma, D., & Tullio, A. 2014. Computer-assisted orthognathic surgery for correction of facial asymmetry: results of a randomised controlled clinical trial. British Journal of Oral and Maxillofacial Surgery, 52(3), 251-257. Ender, A., and Mehl, A. 2012. Influence of scanning strategies on the accuracy of digital intraoral scanning systems. International Journal of Computerized Dentistry, 16(1), 11-21. Erdinç, A. M. E., Doğan, S., & Dinçer, B. 2008. Digital modellerde güvenirlilik. Ege Üniversitesi Diş Hekimliği Fakültesi Dergisi, 29, 99-103. Fleming, P.S., & Marinho, V., Johal A. 2011. Orthodontic measurements on digital study models compared with plaster models: a systematic review. Orthod Craniofac Res, 14:1-16. Flügge, T. V., Schlager, S., Nelson, K., Nahles, S., & Metzger, M. C. 2013. Precision of intraoral digital dental impressions with iTero and extraoral digitization with the iTero and a model scanner. American journal of orthodontics and dentofacial orthopedics, 144(3), 471-478. Garino, F., & Garino, G. B. (2005). Computer-aided interactive indirect bonding. Prog Orthod, 6(2), 214-223. Graf, S., Vasudavan, S., & Wilmes, B. 2018. CAD-CAM design and 3-dimensional printing of mini-implant retained orthodontic appliances. American Journal of Orthodontics and Dentofacial Orthopedics, 154(6), 877-882. Hazeveld, A., Slater, J. J. H., & Ren, Y. 2014. Accuracy and reproducibility of dental replica models reconstructed by different rapid prototyping techniques. American Journal of Orthodontics and Dentofacial Orthopedics, 145(1), 108-115. Im, J., Cha, J. Y., Lee, K. J., Yu, H. S., & Hwang, C. J. 2014. Comparison of virtual and manual tooth setups with digital and plaster models in extraction cases. American Journal of Orthodontics and Dentofacial Orthopedics, 145(4), 434-442. Ke, Y., Zhu, Y., & Zhu, M. 2019. A comparison of treatment effectiveness between clear aligner and fixed appliance therapies. BMC Oral Health, 19(1), 24. Khosravi, R., Cohanim, B., Hujoel, P., Daher, S., Neal, M., Liu, W., & Huang, G. 2017. Management of overbite with the Invisalign appliance. American Journal of Orthodontics and Dentofacial Orthopedics, 151(4), 691-699. Kim, J., Chun, Y. S., & Kim, M. 2018. Accuracy of bracket positions with a CAD/CAM indirect bonding system in posterior teeth with different cusp heights. American Journal of Orthodontics and Dentofacial Orthopedics, 153(2), 298-307 Kravitz, N. D., Groth, C., Jones, P. E., Graham, J. W., & Redmond, W. R. 2014. Intraoral digital scanners. J Clin Orthod, 48, 337-47. Luu, N. S., Nikolcheva, L. G., Retrouvey, J. M., Flores-Mir, C., El-Bialy, T., Carey, J. P., & Major, P. W. 2012. Linear measurements using virtual study models: a systematic review. The Angle Orthodontist, 82(6), 1098-1106. Macchi, A., Carrafiello, G., Cacciafesta, V., & Norcini, A. 2006. Three-dimensional digital modeling and setup. American Journal of Orthodontics and Dentofacial Orthopedics, 129(5), 605-610. Mayers, M., Firestone, A. R., Rashid, R., & Vig, K. W. 2005. Comparison of peer assessment rating (PAR) index scores of plaster and computer-based digital models. American journal of orthodontics and dentofacial orthopedics, 128(4), 431-434. Mullen, S. R., Martin, C. A., Ngan, P., & Gladwin, M. 2007. Accuracy of space analysis with emodels and plaster models. American Journal of Orthodontics and Dentofacial Orthopedics, 132(3), 346-352. Nalcaci, R., Topcuoglu, T., & Ozturk, F. 2013. Comparison of Bolton analysis and tooth size measurements obtained using conventional and three-dimensional orthodontic models. European journal of dentistry, 7(S 01), S066-S070. Naidu, D., & Freer, T. J. 2013. Validity, reliability, and reproducibility of the iOC intraoral scanner: a comparison of tooth widths and Bolton ratios. American Journal of Orthodontics and Dentofacial Orthopedics, 144(2), 304-310. Nasef, A. A., El-Beialy, A. R., & Mostafa, Y. A. 2014. Virtual techniques for designing and fabricating a retainer. American journal of orthodontics and dentofacial orthopedics, 146(3), 394-398. Okunami, T. R., Kusnoto, B., BeGole, E., Evans, C. A., Sadowsky, C., & Fadavi, S. 2007. Assessing the American Board of Orthodontics objective grading system: digital vs plaster dental casts. American Journal of Orthodontics and Dentofacial Orthopedics, 131(1), 51-56. Peluso, M. J., Josell, S. D., Levine, S. W., & Lorei, B. J. 2004. Digital models: an introduction. In Seminars in Orthodontics (Vol. 10, No. 3, pp. 226-238). WB Saunders. Qiu, L., Haruyama, N., Suzuki, S., Yamada, D., Obayashi, N., Kurabayashi, T., & Moriyama, K. 2012. Accuracy of orthodontic miniscrew implantation guided by stereolithographic surgical stent based on cone-beam CT–derived 3D images. The Angle Orthodontist, 82(2), 284-293. Quimby, M. L., Vig, K. W., Rashid, R. G., & Firestone, A. R. 2004. The accuracy and reliability of measurements made on computer-based digital models. The Angle orthodontist, 74(3), 298-303. Rossini, G., Parrini, S., Castroflorio, T., Deregibus, A., & Debernardi, C. L. 2016. Diagnostic accuracy and measurement sensitivity of digital models for orthodontic purposes: A systematic review. American journal of orthodontics and dentofacial orthopedics, 149(2), 161-170. Santoro, M., Galkin, S., Teredesai, M., Nicolay, O. F., & Cangialosi, T. J. 2003. Comparison of measurements made on digital and plaster models. American journal of orthodontics and dentofacial orthopedics, 124(1), 101-105. Stevens, D. R., Flores-Mir, C., Nebbe, B., Raboud, D. W., Heo, G., & Major, P. W. 2006. Validity, reliability, and reproducibility of plaster vs digital study models: comparison of peer assessment rating and Bolton analysis and their constituent measurements. American journal of orthodontics and dentofacial orthopedics, 129(6), 794-803. Taneva, E., Kusnoto, B., & Evans, C. A. 2015. 3D scanning, imaging, and printing in orthodontics. Issues in contemporary orthodontics, 148. Tarazona, B., Llamas, J.M., Cibrian, R., Gandia, J.L., & Paredes, V. 2012. Evaluation of the validity of the Bolton Index using cone-beam computed tomography (CBCT). Med Oral Patol Oral Cir Bucal;17: e878-83. Van Der Meer, W. J., Vissink, A., & Ren, Y. 2016. Full 3-dimensional digital workflow for multicomponent dental appliances: A proof of concept. The Journal of the American Dental Association, 147(4), 288-291. Weber, D. J., Koroluk, L. D., Phillips, C., Nguyen, T., & Proffit, W. R. 2013. Clinical effectiveness and efficiency of customized vs. conventional preadjusted bracket systems. J Clin Orthod, 47(4), 261-6. Wiechmann, D., Rummel, V., Thalheim, A., Simon, J. S., & Wiechmann, L. 2003. Customized brackets and archwires for lingual orthodontic treatment. American journal of orthodontics and dentofacial orthopedics, 124(5), 593-599. Wong, B.H. 2001. Invisalign A to Z. Am J Orthod ;121:540-1.