Thermoeconomic diagnosis theory based on thermo characterization

Bu makalede termo-karakterizasyona dayanan termoekonomik tanı kuramını tanımlamak için önermeler ve prosedürler sunulmuştur. Bu kuram gelişmiş enerji sistemlerine uygulanabilir. Her bir parça için termo-karakterizasyon seti çevresel değişimler, içsel veya kontrol arızalan oluştuğvmda tüm etkilerin değerlendirilmesine olanak verir. Buna ek olarak gerçek işletim sürecininin gerçek zamanda izlenmesini bir arızalar matrisi ve onun global termoekonomik değerlendirmesini belirleyerek sağlar Sonuçlar bir analitik simülatör ile doğrulanmış ve yükse doğruluk elde edilmiştir.

Termo-karakterizasyona dayanan termoekonomik tanı kuramı

In this paper, the axioms and procedures to define a thermoeconomic diagnosis theory, based on thermocharacterization, are presented. This theory can be applied for advanced energy systems. The thermocharacterization set for each component allows evaluating all the effects when environmental variation, internal or control malfunction occurs. Furthermore, it should allow real-time monitoring in actual operating process, by determining a matrix of malfunctions and its global thermoeconomic assessment. Results are validated with respect to an analytical simulator and high accuracy is obtained.

___

  • Lozano, M., Valero, A. (1993). Theory of the exergetic cost. Energy. 18(9), 939-960.
  • Lozano, M., Bartolome, J., Valero, A., Reini, M. (1994). Thermoeconomic diagnosis of energy systems, Proceedings of FLOWERS’94, Carnevale, E. et. al., ed., Florence World
  • Energy Research Symposium, Florence, Italy, vol. 1, 149.
  • Pacheco, I., Rangel, V., Zaleta, A., Valero, A. (2010). Hybrid fuel impact reconciliation method: an integral toll or thermoeconomic diagnosis. Energy. 35(5), 2079-2087.
  • Reini, M. (1994). Analysis and development of the thermoeconomic method for the study of energy systems conversion (Analisi e sviluppo dei metodi termoeconomico per lo studio degli impianti di conversione dell’ enegia) (Ph.D. Thesis), University of Padova, Italy.
  • Reini, M., Lazzaretto, A., Macor, A. (1995). Average structural and marginal cost as result of a unified formulation of the thermoeconomic problem. Proceedings Second Law Analysis of Energy Systems: Towards the 21st Century. Rome, Italy.
  • Usón, S., Valero, A. (2007). Intrinsic and Induced Malfunctions Quantification in Thermoeconomic Diagnosis Through Quantitative Causality Analysis. Proceedings of ECOS 2007. Padova, Italy.
  • Usón, S., Valero, A. (2009). Application of Quantitative Causality Analysis to the Quantification of Intrinsic and Induced Effects in the Thermoeconomic Diagnosis of a Coal-fired Power Plant. International Journal of Thermodynamics. 12(2), 61-67.
  • Valero, A., Torres, C., Serra, L., Lozano, M. (1992). A general theory of thermoeconomics. Parts I and II. Proceedings of ECOS’92, Valero, A., Tsatsaronis G, ed., International Symposium on Efficiency, Costs, Optimization and Simulation of Energy Systems, Zaragoza, Spain, vol. 2, 147 – 154.
  • Valero, A., Correas, L., Zaleta, A., Lazzaretto, A., Verda, V., Reini, M., Rangel, V. (2004). On the thermoeconomic approach to the diagnosis of energy system malfunctions. Part I. The TADEUS Problem. Energy, 29,(12- 15), 1875- 1887.
  • Zaleta, A., Rangel, V., Valero, A. (2003), On the thermoeconomic approach to the diagnosis of energy system malfunctions. Part 6: Model of thermodynamic reconciliation for the diagnosis of power plans. Proceedings of ECOS’03, Qvale, B. et. al. ed., 16th International Conference on Efficiency, Cost, Optimization, Simulation and Environment Impact of Energy Systems. Copenhagen, Denmark.
  • Zaleta, A., Gallegos, A., Rangel, V., Valero, A. (2004). A reconciliation method based on a module simulator. An approach to the diagnosis of energy system malfunctions. International Journal of Thermodynamics. 7(22), 51-6.