The Effect of UAV Usage on Detail Points in Cadastre Update Studies: Çorum-Karaköy Case Study

In Turkey, cadastral studies to determine the position, areas, and legal status of the real estate parcels have been carried out for a period of approximately 100 years by various laws, measurement methods, measurement instruments, and substrates. In Turkey, it is necessary to update 40% of the existing parcels because of problems such as produced cadastral substrates that do not reflect the ground structure, inadequate standards for technical reasons, and insufficient spatial data for the establishment of systems. The technical part of the studies for the cadastral update is carried out by the use of modern measurement methods and advanced technological devices, with the contribution of the private sector by the tender procedure. The unmanned aerial vehicle (UAV), which is one of the technological devices, can provide three-dimensional appearance and accuracy, the ability to interpret the land, and time reduction in the studies for cadastral updates. In this study, the contribution of data obtained by a UAV to the detailed studies was investigated for 56 parcels on a cadastral island that has an area of 24.71 ha for the renewal of cadastral parcels related to Karaköy Village of Çorum Province, Osmancık District. The number of detail points determined by the classical method was 392, while the number of detail points determined by the UAV was 682.

Keywords:

Cadastre Cadastre Update, UAV,

PDF

___

Atak, B, (2018). İnsansız hava aracı yardımıyla kadastral harita üretiminin incelenmesi (Yüksek Lisans Tezi). Necmettin Erbakan Üniversitesi, Konya, Türkiye.
Blyenburgh Van, P. (1999). “UAVs: and Overview, In: Air & Space Europe”, I, 5(6), 43-47.
Erenoğlu, R.C., Erenoğlu O. (2018). A case study on the comparison of terrestrial methods and unmanned aerial vehicle technique in landslide surveys: Sarıcaeli landslide, Çanakkale, NW Turkey. International Journal of -Environment and Geoinformatics (IJEGEO), 5(3), 325-336.
Lee, G., Choi, M., Yu, W., & Jung, K. (2019). Creation of river terrain data using region growing method based on point cloud data from UAV photography. Quaternary International.
Mirdan, O., Yakar, M. (2017). Tarihi Eserlerin İnsansız Hava Aracı İle Modellenmesinde Karşılaşılan Sorunlar. Geomatik, 2(3), 118-125.
Nacar, F, (2015). Investigation of the availability of cadastral renovation work in high-resolution satellite images and orthophotos in Turkey, (PhD thesis). Selçuk Üniversitesi, Konya, Turkey.
Pelegrina, M., A Canal, M., Julião, R. P. S. P. M., Kolosinski Obal, K. (2016). Atualização cadastral dirigida, utilizando ortofotos oriundas de Vant. Actas I Seminário Internacional UAV, 129-132.
Şahin, İ., Yakar, M. (2007). Farklı Kaynaklardan Elde Edilen Sayısal Yükseklik Modellerinin Ortofoto Doğruluğuna Etkilerinin Araştırılması.
Sarı, İ, N., Demirel, Z. (2007). Ülkemiz Kadastrosunda Yenileme Olgusu ve Önerileri, Jeodezi, Jeoinformasyon ve Arazi Yönetimi Dergisi, 1(96), 13-21.
Saripalli, S., Montgomery, J. F., Sukhatme, G. S. (2003). Visually Guided Landing Of An Unmanned Aerial Vehicle. Robotics and Automation, IEEE Transactions on, 19(3), 371-380.
Uçakcıoğlu, E, (2008) Kadastro Paftalarının Yenilenmesi Üzerine Bir İnceleme, (Yüksek Lisans Tezi). Afyon Kocatepe Üniversitesi, Afyon, Türkiye.
Yakar, M., Toprak, A. S., Ulvi, A., Uysal, M. (2015). Konya Beyşehir Bezariye Hanının (Bedesten) İHA İle Fotogrametrik Teknik Kullanılarak Üç Boyutlu Modellenmesi. Türkiye Harita Bilimsel ve Teknik Kurultayı, Ankara, Turkey.
Yücel, F, (2018) Kadastrodaki Yenileme Çalışmalarının Farklı Kadastral Teknik ve Mevzuat Uygulamalarıyla Karşılaştırılarak İncelenmesi, (Yüksek Lisans Tezi). Zonguldak Bülent Ecevit Üniversitesi, Zonguldak, Türkiye.