Ali Cem YAKARYILMAZ, Şafak YILDIZHAN, Arif Emre AKTAŞ, Oğuz BAŞ, Erdi TOSUN, Tayfun ÖZGÜR, Kadir AYDIN

Development of a prototype hydrogen vehicle

Developing technology, new technologies, and changing world standards have led researchers to search for new energy sources. In addition to countries such as America, Germany, and Japan, most automobile manufacturers have been able to adapt to changing standards, have done major researches on alternative energy vehicles, and have started to market their products. In this study, a prototype hydrogen vehicle was developed for TÜBİTAK Efficiency Challenge Electric Vehicle Organization. Design criteria were determined within the limits of the competition rule book. A computer-aided design (CAD) program was used in the vehicle shell and mechanical part designs. Vehicle flow analysis was carried out with the help of computational fluid dynamics (CFD) program. Laboratory condition long-term performance test of the fuel cell has been carried out and whether the fuel cell power was sufficient for the vehicle.

Keywords:

Prototype, Hydrogen, Fuel cell vehicle, Proton Exchange Membrane fuel cell,

PDF

___

Z. Hbilate, Y. Naimi, and D. Takky, "Modelling operation of proton exchange membrane fuel cells - A brief review of current status", Materials Today: Proceedings, 13, 889–898, 2019.
A. Ahmed, A.Q. Al-Amin, A.F. Ambrose, and R. Saidur, "Hydrogen fuel and transport system: A sustainable and environmental future", International Journal of Hydrogen Energy, 41, (3), 1369–1380, 2016.
N. Khatri and K.K. Khatri, "Hydrogen enrichment on diesel engine with biogas in dual fuel mode", International Journal of Hydrogen Energy, 45, (11), 7128–7140, 2020.
A. Kirubakaran, S. Jain, and R.K. Nema, "A review on fuel cell technologies and power electronic interface", Renewable and Sustainable Energy Reviews, 13, (9), 2430–2440, 2009.
S. Obara and I. Tanno, "Study on capacity optimization of PEM fuel cell and hydrogen mixing gas-engine compound generator", International Journal of Hydrogen Energy, 32, (17), 4329–4339, 2007.
C. Depcik, T. Cassady, B. Collicott, S.P. Burugupally, X. Li, S.S. Alam, J.R. Arandia, and J. Hobeck, "Comparison of lithium ion Batteries, hydrogen fueled combustion Engines, and a hydrogen fuel cell in powering a small Unmanned Aerial Vehicle", Energy Conversion and Management, 207, 112514, 2020.
X. Zhang, M. Luo, W. Dai, C. Yao, J. Wang, D. Huang, and C. Wang, "Automotive fuel cell engine test cell design and its thermal flow analysis", International Journal of Hydrogen Energy, 43, (36), 17409–17419, 2018.
N. Baharlou Houreh, M. Ghaedamini, H. Shokouhmand, E. Afshari, and A.H. Ahmaditaba, "Experimental study on performance of membrane humidifiers with different configurations and operating conditions for PEM fuel cells", International Journal of Hydrogen Energy, 45, (7), 4841–4859, 2020.
E. Carcadea, M. Varlam, M. Ismail, D.B. Ingham, A. Marinoiu, M. Raceanu, C. Jianu, L. Patularu, and D. Ion-Ebrasu, "PEM fuel cell performance improvement through numerical optimization of the parameters of the porous layers", International Journal of Hydrogen Energy, 45, (14), 7968–7980, 2020.
T. Özgür and A.C. Yakaryilmaz, "Thermodynamic analysis of a Proton Exchange Membrane fuel cell", International Journal of Hydrogen Energy, 43, (38), 18007–18013, 2018.
P. Ahmadi, S.H. Torabi, H. Afsaneh, Y. Sadegheih, H. Ganjehsarabi, and M. Ashjaee, "The effects of driving patterns and PEM fuel cell degradation on the lifecycle assessment of hydrogen fuel cell vehicles", International Journal of Hydrogen Energy, 45, (5), 3595–3608, 2020.
F. Gencer, Y. Yamaç, M.İ. Aşçı, and R. Gündeşli, "Experimental and Numerical Analysis of The Aerodynamic Performance of An Electric Vehicle", Kahramanmaras Sutcu Imam University Journal of Engineering Sciences, 23, (1), 48–59, 2020.
D.C. Acer, Ç. Uzay, N. Geren, and H. Akıllı, "Design and Optimization of a Wheel Hub for Lightweight Efficiency Challenge Vehicles", International Advanced Research & Engineering Congress, 192, 2017.