Uğur GÜROL, Savaş DİLİBAL, Batuhan TURGUT, Hakan BAYKAL, Hülya KÜMEK, Mustafa KOÇAK

MANUFACTURING AND CHARACTERIZATON OF WAAM-BASED BIMETALLIC CUTTING TOOL

Anahtar Kelimeler:

Bimetallic Structure

MANUFACTURING AND CHARACTERIZATON OF WAAM-BASED BIMETALLIC CUTTING TOOL

Wire-arc additive manufacturing (WAAM) is a promising method to produce many functional components in different industries. In this method, the welding wires from the feedstock are melted by arc discharge and deposited layer by layer. Other welding wires having different chemical compositions can also be added to the top of the previously deposited layer by replacing the feed wire from the stock to produce bimetallic components. This study investigated the feasibility of using robotic wire arc additive manufacturing technology to produce a bimetallic cutting tool. The bimetallic cutting tool was produced by depositing MSG 6 GZ-60 hard-facing welding wire on top of the austenitic stainless-steel wall produced with ER 316LSi solid wire. The cutting-based equipment requires an increased abrasion resistance with the combination of ductility to provide adequate tool life and performance. Thus, detailed microstructural analysis and hardness tests were conducted to understand the general microstructural characteristic of the manufactured cutting tool, including interfaces between two different materials.

Keywords:

Metal Additive Manufacturing, Wire Arc Additive Manufacturing, Cutting Tools Bimetallic Structure,

PDF

___

1. Chen, X., Han, J., Wang, J., Cai, Y., Zhang, G., Lu, L., Xin, Y., Tian, Y., “A functionally graded material from TC4 to 316L stainless steel fabricated by double-wire + arc additive manufacturing”, Materials Letters, Vol. 300, Pages 130-141, 2021.
2. Wu, B., Qiu, Z., Pan, Z., Carpenter, K., Wang ,T., Ding, D., Duin, S.V., Li, H., “Enhanced interface strength in steel-nickel bimetallic component fabricated using wire arc additive manufacturing with interweaving deposition strategy”, Journal of Materials Science & Technology, Vol. 52, Pages 226–234, 2020.
3. Ahsan, M.R.U., Fan, X., Seo, G.J., Ji, C., Noakes, M., Nycz, A., Liaw, P.K., Kim, D.B., “Microstructures and mechanical behavior of the bimetallic additively-manufactured structure (BAMS) of austenitic stainless steel and Inconel 625”, Journal of Materials Science & Technology, Vol. 74, Pages 176–188, 2021.
4. Sasikumar, R., Kannan, A.R., Kumar, S.M., Pramod, R., Kumar, N.P., Shanmugam, N.S., Palguna, Y., Sivankalai, S., “Wire arc additive manufacturing of functionally graded material with SS 316L and IN625: Microstructural and mechanical perspectives”, CIRP Journal of Manufacturing Science and Technology, Vol. 38, Pages 230–242, 2022.
5. Ahsan, M.R.U., Tanvir, A.N.M., Ross, T., Elsawy, A., Oh, M.S., Kim, D.B., “Fabrication of bimetallic additively manufactured structure (BAMS) of low carbon steel and 316L austenitic stainless steel with wire arc additive manufacturing”, Rapid Prototyping Journal, Vol. 3, Pages, 519–530, 2020.
6. Çam, G., “Prospects of producing aluminum parts by wire arc additive manufacturing (WAAM)”, Materials Today: Proceedings, Vol. 62, Pages 77-85, 2022 7. 8. Güler, S., Serindağ, H.T., Çam, G., “Wire arc additive manufacturing (WAAM): Recent developments and prospects”, Mühendis ve Makine (Engineer and Machinery), Vol. 63, Pages 82-116, 2022
9. Zhang, C., Chen, F., Huang, Z., Jia, M., Chen, G., Ye, Y., Lin, Y., Liu, W., Chen, B., Shen, Q., Zhang, L., Lavernia, E.J., “Additive manufacturing of functionally graded materials: A review”, Materials Science and Engineering : A, Vol. 764, 138209, 2019.
10. Zhang, W.Q., Zhang, B.P., Xiao, H.F., Zhu, H.H., “Interfacial phenomena and microstructure of copper/steel bimetal structure produced by a new hybrid additive manufacturing process combining selective laser melting and directed energy deposition”, Materials Science Forum, Vol. 1054, Pages 31–36, 2022.
11. Wu, B., Pan, Z., Ding, D., Cuiuri, D., Li, H., Xu, J., Norrish, J., “A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement”, Journal of Manufacturing Processes, Vol. 35, Pages 127-139, 2018.
12. Gürol, U., Dilibal, S., Turgut, B., Koçak, M., “Characterization of a low-alloy steel component produced with wire arc additive manufacturing process using metal-cored wire”, Materials Testing, Vol. 64, Issue 6, Pages 755-767, 2022.
13. Chaturvedi, M., Scutelnicu, E., Rusu, C.C., Mistodie, L.R., Mihailescu, D., Subbiah A.V., “Wire arc additive manufacturing: Review on recent fndings and challenges in industrial applications and materials characterization”, Metals, Vol. 11, Issue 6, Issue 939, Pages 1-39, 2021.
14. Motwani, A., Kumar, A., Puri, Y., Lautre N.K., “Mechanical characteristics and microstructural investigation of CMT deposited bimetallic SS316LSi‑IN625 thin wall for WAAM”, Welding in the World, 2022.
15. Gürol, U., Turgut, B., Güleçyüz, N., Dilibal, S., Koçak, M. “Development of multi-material components via robotic wire arc additive manufacturing” International Journal of 3D Printing Technologies and Digital Industry, Vol. 5, Issue 3, Pages 721 – 729, 2021.
16. Jin, W., Zhang, C., Jin, S., Tian, Y., Wellmann, D., Liu, W., “Wire arc additive manufacturing of stainless steels: A review”, Applied Sciences, Vol. 10, Issue 5, 1563, 2020.
17. Jafari, D., Vaneker, T.H.J., Gibson, I., “Wire and arc additive manufacturing: Opportunities and challenges to control the quality and accuracy of manufactured parts”, Materials & Desing, Vol. 202, 109471, 2021.
18. DIN 8555-1, “Filler metals used for surfacing; filler wires, filler rods, wire electrodes, covered electrodes; designation; technical delivery conditions” November 1983.
19. Wang, J.F., “Effect of location on microstructure and mechanical properties of additive layer manufactured Inconel 625 using gas tungsten arc welding”, Materials Science and Engineering A, Vol. 676, Pages 395-405, 2016.
20. Wu, B., Pan, Z., Chen, G., Ding, D., Yuan, L., Cuiuri, D., Li, H., “Mitigation of thermal distortion in wire arc additively manufactured Ti6Al4V part using active interpass cooling”, Science and Technology of Welding and Joining, Vol. 24, Issue 5, Pages 484–494, 2019.
21. Jorge, V.L., Teixeira, F.R., Scotti, A., “Pyrometrical interlayer temperature measurement in WAAM of thin wall: strategies, limitations and functionality”, Metals, Vol. 12, Issue 765, 1-18, 2022.
22. Bandyopadhyay, A., Zhang, Y., Onuike, B., “Additive manufacturing of bimetallic structures”, Virtual and Physical Prototyping, Vol. 17, Issue 2, Pages 256-294, 2022.
23. Saboori, A., Aversa, A., Marchese, G., Biamino, S., Lombardi, M., Fino, P., “Microstructure and mechanical properties of AISI 316L produced by directed energy deposition-based additive manufacturing: A review”, Applied Sciences, Vol. 10, Issue 9, 3310, 2020.
24. Rodrigues, T.A., Escobar ,J.D., Shen, J., Duarte, V.R., Ribamar, G.G., Avila, J.A., Maawad, E., Schell, N., Santos, T.G., Oliveira, J.P., “Effect of heat treatments on 316 stainless steel parts fabricated by wire and arc additive manufacturing: Microstructure and synchrotron X-ray diffraction analysis”, Additive Manufacturing, Vol. 48, Part B, 102428, 2021.
25. Hardfacing Welding Wires And Rods, “600G”, https://gedikwelding.com/en/product-detail/600-g, October 27, 2022.
26. Han, S., Zhang, Z., Liu, Z., Zhang, H., Xue, D., “Investigation of the microstructure and mechanical performance of bimetal components fabricated using CMT-based wire arc additive manufacturing”, Materials Research Express, Vol. 7, 116525, 2020.