___

• [1] Baker, M.: Matt Baker’s Math Blog. https://mattbaker.blog/2018/06/25/the-balanced-centrifuge-problem/. Accessed: 2021-07-15.
• [2] Brunnthaler, K., Schröcker, H., Husty, M.: A new method for the synthesis of bennett mechanisms. Proceedings of CK2005, Cassino, (2005).
• [3] Chansu, S., Taewoong, T., Beobkyoon, K., Hakjong, N., Munsang K., Park, F.: Tangent space rrt: A randomized planning algorithm on constraint manifolds. In Robotics and Automation (ICRA), 2011 IEEE International Conference on, pages 4968–4973,(2011).
• [4] Chirikjian, G.: A new inverse kinematics algorithm for binary manipulators with many actuators. Advanced Robotics, 15:20, (2000). https://doi.org/10.1163/15685530152116245
• [5] Cortes, J., Simeon, T.: Sampling-based motion planning under kinematic loop closure constraints. In Proc. of Workshop on Algorithmic Foundations of Robotics, (2004).
• [6] Creemers, T., Celaya, E., Ros, L.: Exact interval propagation for the efficient solution of planar linkages. In Proc. of the 12th World Conference in Mechanism and Machine Science, (2007).
• [7] David, B., Nir, S.: Generic singular configurations of linkages. Topol. Appl. 159(3),877–890 (2012). https://doi.org/10.1016/j.topol.2011.12.003
• [8] Hausmann, C., Knutson, A.: The cohomology ring of polygon spaces. Ann. Inst: Fourier (Grenoble), 48,281–321 (1998).
• [9] Hegedüs, G., Schicho, J., Schröcker, H.: Four-pose synthesis of angle-symmetric 6r linkages. J. Mech. Robot. 7(4), (2015). https://doi.org/DOI: 10.1115/1.4029186
• [10] Hinokuma, T., Shiga, H.: Topology of the configuration Space of polygons as a codimension one submanifold of a torus. Publ. RIMS, Kyoto Univ.. 34, 313–324 (1998). https://doi.org/10.2977/PRIMS/1195144628
• [11] Husty, M., Pfurner, M., Schröcker, H.: A new and efficient algorithm for the inverse kinematics of a general serial 6r manipulator. Mech. Mach Theory. 42(1),66–81 (2007). https://doi.org/10.1016/j.mechmachtheory.2006.02.001
• [12] Husty, M., Pfurner, M., Schröcker, H., Brunnthaler, K.: Algebraic methods in mechanism analysis and synthesis. Robotica. 25(6),661–675 (2007).
• [13] Iosif, B., Husty, M., Calin, V., Bogdan, G., Tucan, P., Doina, P.: Joint-space characterization of a medical parallel robot based on a dual quaternion representation of SE(3). Mathematics, 8(7), 1086 (2020). https://doi.org/10.3390/math8071086
• [14] Jaillet, L., Porta, J.: Path planning under kinematic constraints by rapidly exploring manifolds. IEEE Trans. Robot.. 29(1),105–117 (2013). https://doi.org/10.1109/TRO.2012.2222272
• [15] Kamiyama, Y.: The homology of the configuration space of a singular arachnoid mechanism. JP J. Geom. Topol. 7,385–395 (2007).
• [16] Kapovich, M., Millson, J.: On the moduli spaces of polygons in the euclidean plane. J. of Differential Geometry. 42,133–164 (1995). https://doi.org/10.4310/jdg/1214457034
• [17] La Valle, S., M.: Planing algorithms. Cambridge University Press, (2006).
• [18] Li, H., Lee, R.: Inverse kinematics for a serial chain with joints under distance constraints. In: Robotics: Science and systems, pages 177–184, (2006).
• [19] Li, H., Lee, R.; A unified geometric approach for inverse kinematics of a spatial chain with spherical joints. In: Proceedings 2007 IEEE International Conference on Robotics and Automation, pages 4420–4427, (2007).
• [20] Li, H., Lee, R., Blumenthal, J., Ihar, V.: Convexly stratified deformation spaces and efficient path planning for planar closed chains with revolute joints. Int. J. Rob. Res. 27(11-12), 1189–1212 (2008). https://doi.org/10.1177/0278364908097211
• [21] Li, H., Lee, R., Blumenthal, J., Ihar, V.: Stratified deformation space and path planning for a planar closed chain with revolute joints. In: Algorithmic Foundation of Robotics VII, pages 235–250, (2008).
• [22] Liu, G., Trinkle, J., Yang, Y., Luo, S.: Motion planning of planar closed chains based on structural sets. IEEE Access. 8,117203–117217 (2020). https://doi.org/10.1109/ACCESS.2020.3004229
• [23] Luenberger, D., Yinyu, Y.: Linear and nonlinear programming, volume 228. Springer, (2015).
• [24] Milgram, J., Trinkle, J.: The geometry of configuration spaces for closed chains in two and three dimensions. Homol. Homotopy Appl. 6(1),237–267 (2004).
• [25] Ruggiu, M., Müller, A.: Investigation of cyclicity of kinematic resolution methods for serial and parallel planar manipulators. Robotics. 10(1),9 (2021). https://doi.org/10.3390/robotics10010009
• [26] Trinkle, J., C., Liu, G., F., Milgram, R., J.: Toward complete path planning for planar 3r-manipulators among point obstacles. Algorithmic Foundations of Robotics VI, pages 329–344, (2005).
• [27] Trinkle, J., C., Milgram, J., R.: Complete path planning for closed kinematic chains with spherical joints. Int. J. Rob. Res. 21(9),773–789 (2002). https://doi.org/10.1177/0278364902021009119
• [28] Tondu, B.: Closed-form redundancy solving of serial chain robots with a weak generalized inverse approach. Rob. Auton. Sys. 74, 360–370 (2015). https://doi.org/10.1016/j.robot.2015.08.003
• [29] Yakey, J., La Valle, S., Kavraki, L.: A probabilistic roadmap approach for systems with closed kinemtic chains. In Proc. IEEE Int. Conf. Robot. Autom. (ICRA), (1999).
• [30] Yajia, Z., Hauser, K., Jingru, L.: Unbiased, scalable sampling of closed kinematic chains. In: Robotics and Automation (ICRA), 2013 IEEE International Conference on, pages 2459–2464. IEEE, (2013).
• [31] Yakey, J., H., La Valle, S., Kavraki, L., E.: Randomized path planning for linkages with closed kinematic chains. IEEE Trans. Robot. Autom. 17(6),951–958 (2001). https://doi.org/10.1109/70.976030
• [32] Zangerl, G.: On the configuration space of planar closed kinematic chains. Int. Electron. J. Geom. 13(1),74–86 (2019). https://doi.org/10.1177/0278364902021009119