___

• [1]. ASTM E 160-50., (1975). Standard test method for combustible properties of treated wood by the cribe test. West Conshohocken, PA, USA: ASTM Standards [2]. ASTM-D 1413-76., (1976). Standart test methods of testing wood preservatives by laboratory soilblock cultures, Annual Book of Astm Standarts. USA, 452-460. [3]. ASTM-E 160-50., (1975). Standart test method for combustible properties of terated wood by the crib test. ASTM Standards, USA. [4]. Forest Products Laboratory - USDA., (2010). Wood Handbook: Wood as an Engineering Material. USDA - General Technical Report, General Te, 508. https://doi.org/General Technical Report FPL-GTR-190 [5] Ibach, R. E., (2013). Biological Properties of Wood. Handbook of Wood Chemistry and Wood Composites, 5, 99–126. https://doi.org/10.1201/b12487-8 [6]. EPA., (2006). Solid waste management and greenhouse gases a life cycle assessment of emissions and sinks. 3rd Ed. Washington, DC: U.S. Environmental Protection Agency. [7]. Rowell, R. M., and Dietenberger, M. A. (2013). Thermal Combustion , and Fire Retardancy of Wood. Handbook of Wood Chemistry and Wood Composites, 127–149. https://doi.org/doi:10.1201/b12487-9 [8]. Poncsák, S.; Kocaefe, D.; Bouazara, M. and Pıchette, A. (2006). Effect of high temperature treatment on the mechanical properties of birch (Betula papyrifera). Wood Science and Technology 40(8): 647-663. [9]. Aydemir, D., Civi, B., Alsan, M., Can, A., Sivrikaya, H., Gunlduz,, G. and Wang, A., (2016). Mechanical, morphological and thermal properties of nano-boron nitride treated wood materials, Maderas. Ciencia y tecnología 18(1): 19 – 32. [10]. Keskin, H., Atar, M. and Izciler, M., (2009). Impacts of impregnation chemicals on combustion properties of the laminated wood materials produced combination of beech and poplar veneers, Construction and Building Materials 23(2):634-643. [11]. Keskin, H., Erturk, N. S., Colakoglu, M. H. and Korkut, S., (2013). Combustion properties of Rowan wood impregnated with various chemical materials, Int. J. Phys. Sci. 8 (19) 1022–1028. [12]. Lee H. L., Chen G. C. and Rowell R. M., (2004). Thermal properties of wood reacted with a phosphorus pentoxide–amine system, J. Appl. Polym. Sci. 91 2465–2481 [13]. Deveci, I., Baysal, E., Toker, H., Yuksel, M., Turkoglu, T. and Peker, H., (2017). Thermal characterıstıcs of orıental beech wood treated wıth some leachıng resıstant borates, Wood Research, 62 (1): 91-10 2. [14]. Ayan, S., Doruk, Ş., Arslan, A.R. and Perçin, O., (2011). Effect of sodium borate solution added in the adhesive line and used as impregnatıon material on combustion properties of laminated limba wood (LVL), Technology, 14(4), 107-114 [15]. Kim, J. Y., Kim, T. S., Eom, I. Y., Kang, S. M., Cho, T. S., Choi, I. G. and Choi, J. W., (2012). Characterization Of Pyrolytic Products Obtained From Fast Pyrolysis Of Chromated Copper Arsenate (CCA)- and Alkaline Copper Quaternary Compounds (ACQ)-Treated Wood Biomasses, J. Hazard. Mater. 227– 228 445–452. [16]. Marney, D. C. O. and Russell, L. J. (2008). Combined Fire Retardant and Wood Preservative Treatments for Outdoor Wood Applications – A Review of the Literature. Fire Technology, 44(1), 1–14. https://doi.org/10.1007/s10694-007-0016-6. [17]. Naeher, L. P., Brauer, M., Zelikoff, J. T., Simpson, C. D., Koenig, J. Q. and Smith, K. R. (2007). Woodsmoke Health Effects : A Review, 67–106. https://doi.org/10.1080/08958370600985875 [18]. White, R. H. (1978). Oxygen Index Evaluation Of Fire-Retardant-Treated Wood. Wood Science, 12(12), 113–122. [19] Fung, D. P. C., Tsuchıya, Y. and Sumı, K., (1972). Thermal degradation of cellulose and levoglucosan - the effect of inorganic salts. Wood Science 5(1): 38 - 43. [20]. Wang, X., Wang, F., Yu, Z., Zhang, Y., Qi, C., and Du, L., (2017). Surface free energy and dynamic wettability of wood simultaneously treated with acidic dye and flame retardant. Journal of Wood Science, 63(3), 271–280. https://doi.org/10.1007/s10086-017-1621-8 [21]. Wang, F., Liu, J. and Lv, W., (2017). Thermal degradation and fire performance of wood treated with PMUF resin and boron compounds, Fire and Materials, , DOI: 10.1002/fam.2445 [22]. Lu, S. Y. and Hamerton, I., (2012). Recent developments in the chemistry of halogen-free flame retardant polymers, Progress in Polymer Science 27(8), 1661-1712. [23]. Dönmez, Ç. A., (2014). Effect of various wood preservatives on limiting oxygen index levels of fir wood. Measurement: Journal of the International Measurement Confederation, 50(1), 279–284. https://doi.org/10.1016/j.measurement.2014.01.009 [24]. Özkaya, K., (2007). The effect of potassium carbonate, borax and wolmanit on the burning characteristics of oriented strandboard (OSB), 21, 1457–1462. https://doi.org/10.1016/j.conbuildmat.2006.07.001 [25]. Baysal, E., Deveci, I., Turkoglu, T. and Toker, H., (2017). Thermal analysis of oriental beech sawdust treated with some commercial wood preservatives. Maderas. Ciencia Y Tecnologia, 19(3). https://doi.org/10.4067/S0718-221X2017005000028 [26].Hemel Ürün Kataloğu, (2017). website. [Online]. Erişim, URL: http://hemel.com.tr [27]. Bozkurt, Y., Göker, Y. and Erdin, N., (1993). Emprenye tekniği. İ.Ü.Orman Fak. Yayınları, İstanbul, 3779 (425) :125, 135 [28]. Berkel, A., (1972). Ağaç malzeme teknolojisi, ağaç malzemenin korunması ve emprenye tekniği. İstanbul Üniversitesi Orman Fakültesi Yayınları No: 183, Sermet Matbaası, İstanbul, Cilt 2, 334. [29]. Aslan, S. and Özkaya, K., (2004). Farklı kimyasal maddelerle emprenye edilmiş ahşap esaslı levhaların yanma mukavemetinin araştırılması. Süleyman Demirel Üniversitesi Orman Fakültesi Dergisi. 2, 122-140. [30]. Yasar, Ş. Ş., Fidan, M. S., Yaşar, M., Atar, M. and Alkan, E., (2017). Combustion properties of impregnated spruce ( Picea orientalis L.) wood. Construction and Building Materials, 143, 574–579. https://doi.org/10.1016/j.conbuildmat.2017.03.141 [31]. Atar, M., (1999). Renk açıcı kimyasal maddelerin ağaç malzemede üstyüzey işlemlerine etkileri. Doktora Tezi, G.Ü. Fen Bilimleri Enstitüsü. Ankara. [32]. Sigma 74172, NSU Baca Gazı Analizörü Cihazı Kullanım Kılavuzu. [34]. Fidan, M. S., Yaşar, Ş. Ş., Yaşar, M., Atar, M. and Alkan, E., (2016). Characterization of the Combustion Parameters of Impregnated and Varnished Cedar Wood ( Cedrus libani ). Forest Products Journal, 66(5–6), 290–299. https://doi.org/10.13073/FPJ-D-15-00063 [35]. Yasar, Ş. Ş., Fidan, M. S., Yaşar, M. and Atar, M., (2016). Influences of Seasonal Alterations on the Burning Characteristics of Impregnated and, 61(August 2015), 399–412. [36]. Wang, Q., Li, J. and Winandy, J.E., (2004). Chemical mechanism of fire retardance of boric acid on wood, Wood Sci. Technol. 38, 375–389. [37]. Fidan, M. S., Yaşar, Ş. Ş., Yaşar, M., Atar, M., and Alkan, E. (2016). Effect of seasonal changes on the combustion characteristics of impregnated cedar (Cedrus libani A. Rich.) wood. Construction and Building Materials, 106, 711–720. https://doi.org/10.1016/j.conbuildmat.2015.12.133 [38]. Atar, M., Yalınkılıç, A., C. and Aksoy, E., (2010). Renk açma işleminin ağaç malzemenin yanma özelliklerine etkileri. TÜBİTAK, Proje No: 109004