Temperature Compensation of FBG Sensors via Sensor Packaging Approach for Harsh Environmental Applications

Fiber Bragg Gratings (FBGs) are one of the most preferred high technology sensors in the sensor market. Although, FBG based strain sensors are widely used they are most likely to get affected by climate changes such as temperature. Thereby, most of the time they have to be used along with a reference temperature sensor. Otherwise, one should be ensuring that the FBG sensor is isolated from the climate changes which requires more effort and is a less reliable approach as compared to using an additional temperature sensor. In this study, a novel design of temperature compensated FBG sensor package, manufacturing of polyimide coated FBG sensors, and finally montaging of the manufactured FBG sensors to the corresponding package with an appropriate adhesive is presented. In addition, the designed package has been tested under discrete and continuous loading conditions. Obtained results showed that with the designed package it is possible to measure the strain change in terms of sensing capability of 1.2 microstrains (με) up to 80℃ with an extensive compensation ratio.

Keywords:

Fiber Bragg grating, FBG sensor Strain FBG sensor, Compensating FBG,

PDF

___

[1] Ibrar Jahan, M. A., Honnungar, R. V., Versha, R., "Analysis and Sensitivity Improvement of FBG Sensor", International Conference on Recent Advances in Electronics and Communication Technology (ICRAECT), 302-305, (2017).
[2] Harun, S. W., Maier, R. R. J., Riza, M. A., “FBG Sensors for Environmental and Biochemical Applications”, IEEE Sensors Journal, 20(14): 7614- 27, (2020).
[3] Chang, L., Jie, Qi-tao, H., X., Zhi-bin, L., “A new packaged FBG sensor for underground cable temperature monitoring”, 2nd Advanced Information Technology, Electronic and Automation Control Conference, 1789-93, (2017).
[4] Dmitriev, A.A., Gribaev, A.I., Konnov, K.A., Motorin, E.A., Varzhel, S.V., “High-performance fiber Bragg gratings arrays inscription method”, Optical Fiber Technology, 102508, (2021).
[5] Hei J., Jin, W., Lin, Y., Liao, C., Wang, C., Wang, Y., Zhang, C., Zhang, J., "Bragg Gratings in Suspended-Core Photonic Microcells for High-Temperature Applications”,Journal of Lightwave Technology, 36(14): 2920-24, (2018).
[6] Ge, J., Kong, L., Li, Z., Yan, T., Yu, L., Zhao, X., Zhang, W., Zhang, Y., “Ultra-high sensitivity and temperature-compensated Fabry–Perot strain sensor based on tapered FBG”, Optics & Laser Technology, 124: 1- 6, (2019).
[7] Fan, W., Gao, H., Jia, Z., Liu, W., Yang, K., Yu, D., Zhao, X., “A fiber Bragg grating acceleration sensor with temperature compensation”, Optik, 241: 166993, (2021).
[8] Du, C., Jiang, D., Liu, M., Wu, Y., Z. Wang, "FBG-Based liquid pressure sensor for distributed measurement with a single channel in liquid environment”, IEEE Sensors Journal, 20(16): 9155-61, (2020).
[9] Gao, W., Tong, Z., Xue, L., Zhang, H., Zhang, W., Zhong, Y., “Mach–Zehnder interferometer cascaded with FBG for simultaneous measurement of RI and temperature”, Optics Communications, 466: 125624, (2020).
[10] Ghosh, C., Priye, V., "temperature compensated high-resolution ınterrogation of FBG Strain sensor based on four wave mixing", IEEE Sensors Journal, 20(13): 14181-86, (2020).
[11] Ghosh, C., Priye, V., "Highly sensitive FBG strain sensor with enhanced measurement range based on higher order fwm", IEEE Photonics Journal, 12(1): 1-7, (2020).
[12] Fan, Q., Feng, D., Jia, Z., Yong, Z., “Highly sensitive FBG pressure sensor based on square diaphragm”, Optik, 225: 16559, (2020).
[13] Badcock, R. A., Fang, X., Fang, J., Yan, X., and Zhou, W., "Selecting of FBG coatings for quench detection in HTS coils", IEEE Transactions on Applied Superconductivity, 28(4): 1-5, (2018).
[14] Guo, J., Liu, J., Shi, B., Sun, M., Wei, G., Zhang, C., “Characterization of an ORMOCER®-coated FBG sensor for relative humidity sensing”, Measurement, 171: 108851, (2021).
[15] Khasanah, F., Kurniawan, E., Setiono, A., "Analysis of FBG weight sensor based on laser diode transitive response", International Seminar on Sensors, Instrumentation, Measurement and Metrology (ISSIMM), 53-56, (2016).
[16] Chaluvadi, V. N. B., Pattnaik, P. K., "Effect of Strain and Temperature on FBG", IEEE International Conference on Electronics, Computing and Communication Technologies, 1-4, (2020).
[17] Fung, W.K., Johny, J., Prabhu, R., Watson, J., "Investigation of positioning of FBG sensors for smart monitoring of oil and gas subsea structures", OCEANS, 1-4, (2016).
[18] Kahrizi, M., Khorasani, K., Kouhrangiha, F., "Structural Health Monitoring using Apodized Pi-Phase Shifted FBG: Decoupling Strain and Temperature Effects", IEEE SENSORS, 1-4 (2019).
[19] Bosiljevac, M., Dražić-Šegrt, I., Krnjak, A., Šipuš, Z., Šprem, M., "Portable FBG based optical sensor array", IEEE Sensors Applications Symposium (SAS), 1-5, (2015).
[20] Ha, N., Goo, N., Le, V., Kim, J., “Thermal Strain Measurement of Austin Stainless Steel (SS304) during a Heating-cooling Process”, International Journal of Aeronautical and Space Sciences, 18: 206-214, (2017).
[21] Anania, S., Aparna, A., Baby Sreeja, S. D., Mohan, P., Parvathi, G. R., Unnikrishnan, A., “Analytical Study of FBG Spectrum for Temperature Sensing Applications", 2nd International Conference on Inventive Communication and Computational Technologies (ICICCT), 1109-13, (2018).