The Control of Energy Consumption and The Investigation of CO2 Emissions in The Production of Aggregate

The human requirements have increased rapidly depending on population density and urbanization thus industrialization has grown steadily. As a result of this increase of the greenhouse gas emissions into the atmosphere, the global warming has increased slowly. Therefore, the effects of greenhouse gases in all areas of production must be controlled. The study presents the methods of determination of CO2 emissions (CO2-e) and energy consumption in aggregate production. The aggregate constitute approximately 70% by volume of concrete that has widespread use as construction material in the world. One of the most important elements in today's terms is sustainable use of resources and minimum CO2 emissions (CO2 + CO + NOx + CH4…) at every stage of production of aggregate. Therefore, these elements must be taken into consideration in the aggregate production standards. The choice of production method of aggregate is very important for optimum use of energy and effects of greenhouse gas emissions. So the properties of the aggregate material must be known well to obtain the target. Within the scope of this study, the unit value of CO2-e that release when the production of aggregate in different formations is determined for our country. Thus, the effects of green house gas emission can be evaluated according to the characteristics of material in aggregate production planning.In this study, energies consumed during the production of aggregates at a quarry in Istanbul Cendere region were investigated by taking the different formations encountered at the quarry into consideration. The unit CO2 emission values per ton of produced aggregates were calculated as a result of this investigation. Besides, energy consumption values of previous months at this quarry were taken and the unit CO2 emission values were also calculated.  Key Words: Aggregate, CO2 emission, aggregate production, efficient energy consumption. 

___

  • Flower, D.J.M., Sanjayan, J.G., “Green House Gas Emissions due to Concrete Manufacture”, Int J LCA 2007, 12: 282-288 (2008).
  • Turkish Statistical Institute (TÜİK), 2010, GHG EMISSIONS INVENTORY 2008, Newsletter Number 113, 25 June 2010.
  • Van der Merwe, C., “Mining industry challenged to cut energy consumption 15 % by 2015”, Creamer Media’s Mining Weekly Magazine, Energy Conservation, South Africa(2007).
  • Bogunovic, D., Kecojevic, V., Lund, V., Heger, M., Mongeon, P., “Analysis and control of energy consumption in surface coal mining”, 2009 SME Annual Meeting and Exhibit & CMA 111th National Western Mining Conference, February 22-25, 2009 Denver, Colorado, USA(2009).
  • Bush, V., Killingsworth, T.G., Ruffel, E.P., “Leveraging your energy management reduces: application for the mining industry”, SME Annual Meeting 2002, SME, Preprint 02-042(2002).
  • Dessureault, S., “Data mining, mining data: energy consumption modeling”, Proceedings of 33rd International Symposium on Application of Computers and Operations Research in the Mineral Industry, Magri (editor), 2007, Santiago, Chile: Gecamin Ltda., 2007, (Santiago : Quebecor World), 451-457(2007).
  • Harney, D., “Measuring and controlling energy utilization”, 2007 SME Annual Meeting and Exhibit, preprint 07-110, Denver, CO, Feb.26-28, 2007, preprint 07-110(2007).
  • AP-42 Section 13.3, “Explosives Detonation”, EPA Contract No. 69-D0-0123, Midwest Research Institute, Kansas City, MO(1993).
  • IPCC/UNEP/OECD/IEA, Revised 1996 IPCC Guidelines for National Greenhouse Gas Inventories Volume III: Reference Manual, Intergovernmental Panel on Climate Change, United Nations Environment Prog., International Energy Agency, Paris, Chapter 1, 4-44, 62-98(1997).
  • Turkey Electricity Transmission Company General Directorate of Research Planning and Coordination Department, (2004), Turkey Electricity Production Planning Study, (2005 – 2020).
  • Australian Government Department of Climate Change, National Greenhouse Accounts (NGA) Factors (2009).
  • Uz, B., “Mineralogical-Petrographic and Physico- Mechanical Properties Investigation and Evaluation Report of Ayazaga Village Cendere Region”, I.T.U. Mining Faculty, Istanbul, (2007).
  • Bascetin, A., Adiguzel, D., Tuylu, S., Karadogan, A., Caglayan, M., “The Control of Energy Consumption and The Investigation of CO2 Emissions in the Production of Aggregate”, International Sustainable Building Symposium, Ankara-Turkey, 796-801, 26-28 May (2010).
  • Bascetin, A., Sertabipoglu, Z., “Strategic Mine Planning and Design for Quarrying” 2010 SME Annual Meeting & Exhibit, Phoenix Convention Center, Phoenix, Arizona, America, 28 February-03 March 2010.