___

• [1] Guillen, C., Herrero, J., “Single-Phase Cu2O and CuO Thin Films Obtained By Low-Temperature Oxidation Processes”, J. Alloy. Compd., 737: 718-724, (2018).
• [2] Akaltun, Y., “Effect of thickness on the structural and optical properties of CuO thin films grown by successive ionic layer adsorption and reaction”, Thin Solid Films 594: 30–34, (2015).
• [3] Ghamdi, A., Khedr, M., Ansari, M., Hasan, P., Abdel-wahab, M., Farghali, A., “RF sputtered CuO thin films: Structural, optical and photo-catalytic behavior”, Physica E 81:83–90, (2016).
• [4] Samarasekara, P., Kumara N, Yapa, N., “Sputtered copper oxide (CuO) thin films for gas sensor devices”, J. Phys.: Condens. Matter 18, 2417–2420, (2006).
• [5] Wijesundera, P., “Fabrication of the CuO/Cu2O heterojunction using an electrodeposition technique for solar cell applications”, Semicond. Sci. Technol., 25, 045015, (2010).
• [6] Moralesa, J., Sancheza, L., Martın, F., Barradob, J., Sanchez, M., “Nanostructured CuO thin film electrodes prepared by spray pyrolysis: a simple method for enhancing the electrochemical performance of CuO in lithium cells”, Electrochimica Acta 49, 4589–4597, (2004).
• [7] Ghamdi, A., Khedr, M., Ansari, M., Hasan, P., Abdel-wahab, M., Farghali, A., “RF sputtered CuOthin films: Structural, optical and photo-catalytic behavior”, Physica E 81, 83–90, (2016).
• [8] Moumen, A., Hartiti, B., Thevenin, P., Siadat, M., “Synthesis and characterization of CuO thin films grown by chemical spray pyrolysis”, Opt Quant Electron 49:70, 2-17, (2017).
• [9] Akaltun, Y., “Effect of thickness on the structural and optical properties of CuO thin films grown by successive ionic layer adsorption and reaction”, Thin Solid Films 594, 30–34, (2015).
• [10] Nair, M., Guerrero, L., Arenas, O., Nair, P., “Chemically deposited copper oxide thin films: structural, optical and electrical characteristics”, Appl. Surf. Sci., 150, 143–151, (1999).
• [11] Bai, R., Chaudhary, S., Pandya, D., “Temperature dependent charge transport mechanisms in highly crystalline p-PbS cubic nanocrystals grown by chemical bath deposition”, Mater. Sci. Semicond. Process., 75, 301–310, (2018).
• [12] Ahmed, M., Mwankemwa, B., Carleschi, E., Doyle, B., Meyer, W., Nel, J., “Effect of Sm doping ZnO nanorods on structural optical and electrical properties of Schottky diodes prepared by chemical bath deposition”, Mater. Sci. Semicond. Process. 79, 53–60, (2018).
• [13] Marzukil, M., Zain, M., Hisham, N., Zainon, N., Harun, A., Ahmad, R., “Annealing Effects on the Formation of Copper Oxide Thin Films”, IOP Conf. Series: Mat. Sci. Eng.318, 012060, (2018).
• [14] Gopalakrishna, D., Vijayalakshmin, K., Ravidhas, C., “Effect of annealing on the properties of nanostructured CuO thin films for enhanced ethanol sensitivity”, Ceramics International 39, 7685–7691, (2013).
• [15] Saravanan, V., Shankar, P., Mani, G., Rayappan, J., “Growth and characterization of spray pyrolysis deposited copper oxide thin films: Influence of substrate and annealing temperatures”, J. Anal. Appl. Pyrolysis 111, 272–277, (2015).
• [16] Rydosz, A., Szkudlarek, A., “Gas-Sensing Performance of M-Doped CuO-Based Thin Films Working at Different Temperatures upon Exposure to Propane”, Sensors 15, 20069-20085, (2015).
• [17] Shaikha, J., Pawara, R., Devan, R., Ma, Y., Salvi, P., Kolekar, S., Patil, P.S., “Synthesis and characterization of Ru doped CuO thin films for supercapacitor based on Bronsted acidic ionic liquid”, Electrochimica Acta 56, 2127–2134, (2011).
• [18] Zhao, F., Qiu, H., Pan, L., Zhu, H., Zhang, Y., Guo, Z., Yin, J., Zhao, X., Xiao, J., “Ferromagnetism analysis of Mn-doped CuO thin films”, J. Phys. Condens. Matter. 20: 425208, 1-5, (2008).
• [19] Ando, M., Kobayashi, T., Iijima, S., Haruta, M., “Optical CO sensitivity of Au–CuO composite film by use of the plasmon absorption change”, Sensors and Actuators B 96, 589–595, (2003).
• [20] Proença, M., Borges, J., Rodrigues, M., Domingues, R., Dias, J., Trigueiro, J., Bundaleski, N., Teodoro, O., Vaz, F., “Development of Au/CuO nanoplasmonic thin films for sensing applications”, Surf. Coat. Techn., 343, 178–185, (2018).
• [21] Prabua, R., Valanarasua, S., Ganesh, V., Shkir, M., AlFaify, S., Kathalingam, A., Srikumare, S., Chandramohan, R., “An Effect of Temperature on Structural, Optical, Photoluminescence and Electrical Properties of Copper Oxide Thin Films Deposited by Nebulizer Spray Pyrolysis Technique”, Mater. Sci. Semicond. Process., 74, 129–135, (2018).
• [22] Proença, M., Borges, J., Rodrigues, M., Domingues, R., Dias, J., Trigueiro, J., Bundaleski, N., Teodoro, O., Vaz, F., “Development of Au/CuO nanoplasmonic thin films for sensing applications”, Surf. Coat. Techn., 343, 178–185, (2018).
• [23] Güneri, E., Kariper, A., “Characterization of High Quality Chalcogenide Thin Film Fabricated by Chemical Bath Deposition”, Electronic Materials Letters, 9:1,13-17, (2013).
• [24] Ray, S., “Preparation of copper oxide thin film by the sol-gel-like dip technique and study of their structural and optical properties”, Sol. Energy Mater. Sol. Cells, 68, 307-312, (2001).
• [25] Moumen, A., Hartiti, B., Thevenin, P., Siadat, M., “Synthesis and characterization of CuO thin films grown by chemical spray pyrolys”, Opt. Quant. Electron, 49:70,1-12, (2017).
• [26] V. Dhanasekaran, T. Mahalingam, R. Chandramohan, J. Rhee, J.P. Chu, Electrochemical deposition and characterization of cupric oxide thin films, Thin Solid Films 520 (2012), pp. 6608–6613.