Hegzaklorosiklohegzan izomerlerinin metal oksit varlığında gezegen hareketli bilyeli değirmen kullanılarak mekanokimyasal deklorinasyonu

Zararlı etkilerinden dolayı günümüzde hegzaklorosiklohegzan (HCH, C6H6Cl6) kullanımı yasaklanmış olsada geçmişten kalan üretim stokları hala mevcuttur. Son araştırmalar mekanokimyasal deklorinasyonprosesinin HCH’ın gideriminde umut vaat eden bir yöntem olduğunu göstermiştir. Ancak mekanokimyasaldeklorinasyon prosesinin geçerli bir yöntem olabilmesi için daha fazla araştırmaya ihtiyaç duyulmaktadır.Bu amaçla mevcut çalışmada; içeriğinde çeşitli metal oksitler bulunduran uçucu kömür külü (UK) verefrakter tuğla atığı (RT) kullanılarak hegzaklorosiklohegzan (HCH) izomerlerinin mekanokimyasaldeklorinasyonu ilk defa araştırılmıştır. Mekanokimyasal deklorinasyon prosesi oda sıcaklığında gezegenhareketli bilyeli değirmende gerçekleştirilmiş ve giderim veriminin belirlenmesi amacıyla elektron yakalamadedektörlü gaz kromatografi (GC-ECD) cihazı kullanılmıştır. Sonuçlar 1:20 (m/m) oranında HCH: UKkullanılarak 600 dk. sonunda HCH izomerlerinin tamamıyla giderildiğini göstermiştir. Organik klorun sudaçözünür klora dönüşüm oranı ise %52’dir. Proses sonunda bilye sıcaklıkları 105oC’ye kadar yükselmiş vereaktif+HCH karışım sıcaklıkları da proses süresi ile birlikte sürekli olarak artmıştır. Tetraklorobenzenler(TeKBz) ve triklorobenzenler (TKBz) ise deklorinasyon sırasında tespit edilen izomerlerdir. Çalışmasonuçlarına göre HCH izomerlerinin mekanokimyasal deklorinasyonu, termal arıtma ve biotik parçalamauygulamalarına alternatif çevre dostu bir teknolojidir.

Mechanochemical declorination of hexachlorocyclohexane isomers by planetary ball mill in the presence of metal oxides

Although the use of hexachlorocyclohexane (HCH, C6H6Cl6) is currently prohibited, the remaining production stocks of HCH are still present. Recent investigations have shown that mechanochemical dechlorination is a promising method to degrade HCH. However, the mechanochemical dechlorination method still needs further investigations. For this reason, in this study, mechanochemical dechlorination of HCH isomers were investigated for the first time by using coal fly ash (FA) and refractory brick waste (RB) which contain various metal oxides. The mechanochemical dechlorination process was carried out at room temperature using a planetary ball mill and the gas chromatograph with electron capture detector (GC-ECD) was used to determine the degradation efficiency. The results show that HCH isomers can be completely destroyed after 600 min grinding time in a mixture with a HCH/FA ratio of 1:20 (m/m). The conversion rate of chlorine to water soluble chlorine is 52%. At the end of the process, the ball temperatures increased up to 105oC and the mixture temperatures of reagent + HCH were continuously increased with the process time. Tetrachlorobenzenes (TeCBz) and trichlorobenzenes (TCBz) are the isomers detected during the dechlorination. Based on this study, mechanochemical dechlorination of HCH isomers is a eco-friendly technology alternative to thermal treatment and biotic degradation applications.

___

  • 1. Breivik K., Pacyna J.M., Munch J., Use of α-, β-, γhexachlorocyclohexane in Europe, 1970–1996, Science of the Total Environment, 239, 151–163, 1999.
  • 2. Li Y.F., Global technical hexachlorocyclohexane usage and its contamination consequences in the environment: from 1948-1997, Science of The Total Environment, 232, 121-158, 1999.
  • 3. Metcalf R.L., The Mode of Action of Organic Insecticides, National Research Council, Washington D.C., ABD, 1948.
  • 4. Matolcsy G., Nadasy M., Andriska V., Studies in Environmental Science 32: Pesticide Chemistry, Elsevier Science, New York, ABD, 1988.
  • 5. Willet K.L., Utrich E.M., Hites R.A., Differential toxicity and environmental facts of hexachlorocyclohexane isomers, Environmental Science & Technology, 32, 2197–2207, 1998.
  • 6. Hauzenberger I., Reports on Substances Scheduled for Re-Assessments under the UNECE POPs Protocol, Technical Review Report on Lindane, Federal Environment Agency, Avusturya, 2004.
  • 7. UNEP, Report of the Conference of the parties of the Stockholm convention on persistent organic pollutants on the work of its fourth meeting. In: Conference of the Parties of the Stockholm Convention on Persistent Organic Pollutants Fourth Meeting, Secretariat of the Stockholm Convention, Geneva, İsviçre, 2009.
  • 8. OSPAR, 2006. Commission Protecting and conserving the North-East Atlantic and its resources. http://www.ospar.org/convention. Erişim tarihi Ağustos 11, 2016.
  • 9. Jit S., Dadhwal M., Kumari H., Jindal S., et al., Evaluation of hexachlorocyclohexane contamination from the last lindane production plant operating in India, Environmental Science Pollution Research, 18 , 586- 597, 2011.
  • 10. POPRC, Draft Risk Profile for BetaHexachlorocyclohexane. Secretariat of the Stockholm Convention POPs Review Committee, 31, Geneva, İsviçre, 2007.
  • 11. Vijgen J., The legacy of lindane HCH isomer production: A global overview of residue management, formulation and disposal. International HCH and Pesticides Association, 26, Denmark, 2006.
  • 12. Jürgens H.J., Roth R., Case Study and Proposed Decontamination Steps of the Soil and Groundwater Beneath a Closed Herbicide Plant in Germany, Chemosphere, 18, 1163-1169, 1989.
  • 13. Olie,K., Coenraads, P.J., Tang N.J., Luksemburg, W.J., Wong A.S., Occupational Contamination with PCDD/F’s During Recycling of Non-Gamma HCH in a Chinese Chemical Factory. Part IV Comparison of Samples in and Outside the Factory with Isomer and Congener Patterns, 22nd International Symposium on Halogenated Environmental Organic Pollutants and POPs, Barselona-İspanya, 56, 11-16 Ağustos, 2002.
  • 14. Tange L., Drohmann D., Waste electrical and electronic equipment plastics with brominated flame retardants— from legislation to separate treatment-thermal process, Polymer Degradation and Stability, 88, 35-40, 2005.
  • 15. Tomio S., Masamitsa T., Development of Fluidized Bed Gasification and Swirl-flow Melting Process for Municipal Solid Wastes, The University of Seoul Press, Seul, Kore, 2002.
  • 16. Ecke H., Sakanakura H., Matsuto T., State-of-the-art treatment processes for municipal solid incineration residues in Japan. Waste Management & Research, 18, 41-51, 2000.
  • 17. Hagenmaier H., Kraft M., Brunner H., Catalytic effects of fly ash from incineration facilities on the formation and decomposition of polychlorinated dibenzo-pdioxins and polychlorinated dibenzofurans, Environmental Science & Technology, 21, 1080-1084, 1987.
  • 18. Zinoviev S., Fornasiero P., Lodolo A., Miertus S., Noncombustion technologies for POPs destruction. Review and evaluation, International Centre for Science and Hich Technology of the United Nations Industrial Development Organisation (ICS-UNIDO), Trieste, İtalya, 2007.
  • 19. Tiernan T.O., Wagel D.J., VanNess G.F., Treatment of complex chemical wastes with the base catalyzed decomposition (BCD) process, Organohalogen Compounds, 8, 289-292, 1992.
  • 20. Shi W., Zhang J., Photodegradation mechanism and its influential factors of PVC, China Synthetic Resin and Plastics, 23, 80-84, 2006.
  • 21. Zhang T., Cheng X.X., Progress of the research on persistent organic pollutants, Sci-Tech Information Development & Economy, 17, 206-208, 2007. 22. Heinicke G., Tribochemistry. Akademic-Verlag, Berlin, Almanya, 1984.
  • 23. Wei Y., Yan J., Lu S., Li X., Mechanochemical decomposition of pentachlorophenol by ball milling, Journal of Environmental Sciences, 21, 1761–1768, 2009.
  • 24. Rowlands, S.A., Hall, A.K., Mccormick, P.G., Street, R., Hart, R. J., Ebell, G.F., Donecker, P., Destruction of toxic materials, Nature, 367, 223, 1993.
  • 25. Kaupp, G., Mechanochemistry: the varied applications of mechanical bond-breaking, CrysEngCommun, 11 388-403, 2009.
  • 26. Cagnetta G., Huang, J., Lu, M., Wang, B., Wang, Y., Deng, S., Yu, G., Defect engineered oxides for enhanced mechanochemical destruction of halogenated organic pollutants, Chemosphere, 184, 879-883, 2017.
  • 27. Yin, K., Gao, X., Sun, Y., Zheng, L., Wang, W., Thermal degradation of hexachlorobenzene in the presence of calcium oxide at 340-400 o C, Chemosphere, 93, 1600-1606, 2013.
  • 28. Yu Y., Huang, J., Zhang, W., Zhang, K., Deng, S., Yu, G., Mechanochemical destruction of mirex co-ground with iron and quartz in a planetary ball mill, Chemosphere, 90, 1729-1735, 2013.
  • 29. Delogu F., Mechanochemical Behavior of Surface Radicals in Ground Quartz. The Journal of Physical Chemistry C, 115, 21230-21235, 2011.
  • 30. Tanaka Y., Zhang, Q., Saito, F., Mechanochemical Decomposition of an Aromatic Polyamide Film, Industrial & Engineering Chemistry Research, 42, 5018- 5023, 2003.
  • 31. Zhang W., Wang H., Huang J., Yu M., et al., Acceleration and mechanistic studies of the mechanochemical dechlorination of HCB with iron powder and quartz sand, Chemical Engineering Journal, 239, 185-191, 2014.
  • 32. Leo P.D., Pizzigallo, M.D.R., Ancona, V., Benedetto, F.D., et al., Mechanochemical degradation of pentachlorophenol onto birnessite, Journal of Hazardous Materials, 244-245, 303-310, 2013.
  • 33. Xu Z., Zhang, X., Fei, Q., Dechlorination of pentachlorophenol by grinding at low rotation speed in short time, Energy, Resources and Environmental Technology, 23, 578-582, 2015.
  • 34. Ren Y., Kang, S., Zhu, J., Mechanochemical degradation of hexachlorobenzene using Mg/Al2O3 as additive, Journal of Material Cycles and Waste Management, 17, 607-615, 2015.
  • 35. Cagnetta G., Robertson, J., Huang, J., Zhang, K., Yu, G., Mechanochemical destruction of halogenated organic pollutants: A critical review, Journal of Hazardous Materials, 313, 85-102, 2016.
  • 36. Wang H., Huang, J., Zhang, K., Yu, Y., Effects of zerovalent metals together with quartz sand on the mechanochemical destruction of dechlorane plus coground in a planetary ball mill, Journal of Hazardous Materials, 264, 230-235, 2014.
  • 37. Nasser A., Mingelgrin, U., Birnessite-induced mechanochemical degradation of 2,4-dichlorophenol, Chemosphere, 107, 175-179, 2014.
  • 38. Figueroa I.D.C., Simmons, P.G., Structure-activity relationships of chlorobenzenes using DNA measurement as a toxicity parameter in algae, Environmental Toxicology and Chemistry, 10, 323-329, 1991.
  • 39. Ghaffar A., Tabata, M., Mashiatullah, A., Two-Phase Dechlorination/Detoxification of Lindane (Hexachlorocyclohexane), Advances in Environmental Chemistry, 792680, 1-7, 2014.
  • 40. Nomura Y., Fujiwara, K., Terada, A., Nakai, S., Hosomi, M., Mechanochemical degradation of γhexachlorocyclohexane by a planetary ball mill in the presence of CaO, Chemosphere, 86 (3), 228-234, 2012.
Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi-Cover
  • ISSN: 1300-1884
  • Yayın Aralığı: Yılda 4 Sayı
  • Başlangıç: 1986
  • Yayıncı: Oğuzhan YILMAZ
Sayıdaki Diğer Makaleler

Kablosuz sensör ağlarda dv-hop tabanlı iç konumlandırma yöntemlerinin incelenmesi kıyaslanması ve K-means++ kümeleme yöntemi ile yeni yaklaşım

Muhammed Ali AYDIN, Merve KANMAZ

Farklı trafik, zemin, malzeme ve iklim koşulları için mekanistik-ampirik (M-E) yöntemle tasarlanan derzli donatısız rijit üstyapı sistemlerinin karşılaştırılması

Hande İşık ÖZTÜRK, Emine Bilge TAN, Emin ŞENGÜN, İsmail Özgür YAMAN

Ofis yapıları için ışık rafı tasarımında 30° ve 45° enlemlerinde optimum verim sağlanması için bir yöntem

Cüneyt KURTAY, Okay ESEN

Islak öğütme yöntemi ile metalik demir ve kobalttan hazırlanmış CoFe2O4 nanoyapılarda doyum manyetizasyonunun yapıya bağlı değişimi

Mehmet Burak KAYNAR, Ahmet TOPRAK, Şadan ÖZCAN

PMMA/Mikroküre/Montmorillonit Nanokompozit ve PMMA/Mikroküre/Halloysite Nanokompozitin Atom Transfer Radikal Polimerizasyon Tekniği ile Üretilmesi ve Mekanik Özelliklerinin Karşılaştırmalı Olarak İncelenmesi

Tayfun BEL, Cüneyt ARSLAN, Nilgün BAYDOĞAN

Menderes ilçesindeki orman yangınının süperpiksel bölütleme temelli arama yöntemiyle tespiti

Ali Can KARACA, Mehmet Kemal GÜLLÜ

Sıralı çift ateşlemeli bir benzin motorunda CNG kullanımı için ateşleme avansı etkilerinin silindir içi yanma had analizi ile incelenmesi

Ahmet Alper YONTAR, Yahya DOĞU

Otomobillerde düşük frekanslı uğultu probleminin ayarlı kütle sönümleyicisi kullanımıyla iyileştirilmesi

Akın OKTAV, Çetin YILMAZ, Günay ANLAŞ

Kesir dereceli PI denetleyici içeren zaman gecikmeli bir bölgeli yük frekans kontrol sisteminin kazanç ve faz payı tabanlı kararlılık analizi

Saffet AYASUN, Şahin SÖNMEZ

Toz enjeksiyon kalıplamada krom arayüzeyi kullanılarak montajlı parça imalatının araştırılması

Oguz YİLMAZ, Kamran SAMET, Harun KOCAK, Cetin KARATAS