___

• 1. Perelaer J, Smith PJ, Mager D, Soltman D, Volkman SK, Subramanian V, et al. Printed electronics: the challenges involved in printing devices, interconnects, and contacts based on inorganic materials. Journal of Materials Chemistry. 2010 June 25;: p. 8446-8453.
• 2. Gamota D, Brazis P, Kalyanasund K, Zhang J. Printed organic and molecular electronics Berlin: Springer; 2004.
• 3. Karabulut Y., Eklemeli imalat yöntemiyle üretilen farklı cidar kalınlıklarında üretilen inconel 718 alaşım malzemesine uygulanan ikincil işlemlerin malzemenin mekanik özelliklerine etkisinin incelenmesi. Marmara Üniversitesi, fen bilimleri Enstitüsü, 2020.
• 4. Kantola V, Kulovesi J, Lahti L, Lin R, Zavodchikova M, Coatanea E. Printed electronics, Now and Future. Bit Bang. 2009;: p. 63-105.
• 5. Gebel M., (2018). Polimer matrisli sürekli fiber takviyeli kompozit parça üretimi için bir eklemeli imalat yönteminin geliştirilmesi. Yüksek lisans tezi. Kahramanmaraş Sütçü İmam Üniversitesi Fen Bilimleri Enstitüsü, Kahramanmaraş.
• 6. Özdoğan S., (2021). Eklemeli imalat yöntemleriyle üretilen parçaların baskı parametrelerinin üç-nokta-eğilme davranişlarina etkisinin incelenmesi. Yüksek lisans tezi. Necmettin Erbakan Üniversitesi Fen Bilimleri Enstitüsü, Konya.
• 7. Song, P., Wang, G., & Zhang, Y. (2021). Preparation and performance of graphene/carbon black silicone rubber composites used for highly sensitive and flexible strain sensors. Sensors and Actuators, A: Physical, 323, 112659. https://doi.org/10.1016/j.sna.2021.112659
• 8. İnternet: https://3d3teknoloji.com/blog/3d-baski-organ-en-umut-verici-projeler/
• 9. İnternet: https://teknolojiprojeleri.com/3d-yazici/biyo-yazici-nedir-organ-uretimi
• 10. Fu, H. (2018). Rotational Energy Harvesting for Low Power Electronics. Thesis, February.
• 11. Internet:https://www.google.com/search?q=ak%C4%B1ll%C4%B1+saat&sxsrf=ALeKk00lqiD3xPg9xp4ihLwfP5jkfBIPEA:1629193563143&source=lnms&tbm=isch&sa=X&ved=2ahUKEwi2vOf84rfyAhVD_rsIHb4ADVsQ_AUoAnoECAEQBA&biw=1366&bih=625#imgrc=2Xs82z2l53s-fM
• 12. Zhou, Z., He, Z., Yin, S., Xie, X., & Yuan, W. (2021). Adhesive, stretchable and antibacterial hydrogel with external/self-power for flexible sensitive sensor used as human motion detection. Composites Part B: Engineering, 220(April), 108984. https://doi.org/10.1016/j.compositesb.2021.108984
• 13. Shen, X., Zhao, S., & Wan, A. (2021). A sensitive and flexible sensor enhanced by constructing graphene-based polyaniline conductive networks. Sensors and Actuators, A: Physical, 330, 112862. https://doi.org/10.1016/j.sna.2021.112862
• 14. Zhang, Y., & Cui, Y. (2019). A flexible calligraphy-integrated in situ humidity sensor. Measurement: Journal of the International Measurement Confederation, 147, 106853. https://doi.org/10.1016/j.measurement.2019.106853
• 15. Annabestani, M., Esmaili-dokht, P., Olianasab, S. A., Orouji, N., & Alipour, Z. (n.d.). A novel fully 3D , microfluidic-oriented , gel-based and low cost stretchable soft sensor. 1–11.
• 16. Zhang, R., Lv, A., Ying, C., Hu, Z., Hu, H., Chen, H., Liu, Q., Fu, X., Hu, S., & Wong, C. P. (2020). Facile one-step preparation of laminated PDMS based flexible strain sensors with high conductivity and sensitivity via filler sedimentation. Composites Science and Technology, 186(October 2019), 1–7. https://doi.org/10.1016/j.compscitech.2019.107933
• 17. Xiong y., Shen Y. Tian L., Hu Y., Zhu P., Sun. R., Wong C. P.(2020). A flexible, ultra-highly sensitive and stable capacitive pressure sensor with convex microarrays for motion and health monitoring. Nano energy. 70 (October 2020), 104436.
• 18. Sobolewski P.,, Goszczyńska A.,, Aleksandrzak M., Urbaś K., Derkowska J., Bartoszewska A., Podolski J., Mijowska E. and El Fray M., ‘’ A biofunctionalizable ink platform composed of catechol-modified chitosan and reduced graphene oxide/platinum nanocomposite’’
• 19. Van Driessche, I., Feys, J., Hopkins, S. C., Lommens, P., Granados, X., Glowacki, B. A., Ricart, S., Holzapfel, B., Vilardell, M., Kirchner, A., & Bäcker, M. (2012). Chemical solution deposition using ink-jet printing for YBCO coated conductors. Superconductor Science and Technology, 25(6). https://doi.org/10.1088/0953-2048/25/6/065017
• 20. Jabari, E., & Toyserkani, E. (2015). Micro-scale aerosol-jet printing of graphene interconnects. Carbon, 91, 321–329. https://doi.org/10.1016/j.carbon.2015.04.094
• 21. Sukeshini A., M., Meisenkothen, F., Gardner, P., & Reitz, T. L. (2013). Aerosol Jet® Printing of functionally graded SOFC anode interlayer and microstructural investigation by low voltage scanning electron microscopy. Journal of Power Sources, 224, 295–303. https://doi.org/10.1016/j.jpowsour.2012.09.094
• 22. Zhang, H., Choi, J. P., Moon, S. K., & Ngo, T. H. (2020). A hybrid multi-objective optimization of aerosol jet printing process via response surface methodology. Additive Manufacturing, 33(December 2019), 101096. https://doi.org/10.1016/j.addma.2020.10109
• 23. Allanurov, A. M., Zdrok, A. Y., Loschilov, A. G., & Malyutin, N. D. (2014). Problem of Ink Evaporation while Using Plotter Systems to Manufacture Printed Electronic Products. Procedia Technology, 18(September), 19–24. https://doi.org/10.1016/j.protcy.2014.11.006
• 24. Zang, Z., Tang, X., Liu, X., Lei, X., & Chen, W. (2014). Fabrication of high quality and low cost microlenses on a glass substrate by direct printing technique. Applied Optics, 53(33), 7868. https://doi.org/10.1364/ao.53.007868
• 25. Larson, B. J., Gillmor, S. D., & Lagally, M. G. (2004). Controlled deposition of picoliter amounts of fluid using an ultrasonically driven micropipette. Review of Scientific Instruments, 75(4), 832–836. https://doi.org/10.1063/1.1688436
• 26. Demiröz Ö. B., (2021). Eklemeli imalat ile yüzeyi güçlendirilen termoelektrik modül yüzeyindeki ısı dağılım etkisinin analizi. Yüksek lisans tezi. İstanbul Gedik Üniversitesi. İstanbul.
• 27. Aktürk M., (2021). Eklemeli imalat yöntemi ile üretilmiş AlSi10Mg malzemesinin malzeme yapısal parametrelerinin belirlenmesi ve sonlu elemanlar yöntemiyle doğrulanması. Yüksek Lisans Tezi. Karabük Üniversitesi Fen Bilimleri Enstitüsü, Karabük.
• 28. Wang, H., Du, W., Zhao, Y., Wang, Y., Hao, R., & Yang, M. (2021). Joints for treelike column structures based on generative design and additive manufacturing. Journal of Constructional Steel Research, 184, 106794. https://doi.org/10.1016/j.jcsr.2021.106794
• 29. Top N., (2019). Doku mühendisliği için eklemeli imalat kullanılarak yeni bir kemik iskelesi tasarımı ve üretimi. Yüksek lisans tezi. Gazi Üniversitesi Fen Bilimleri Enstitüsü, Ankara.
• 30. Claudia, E., Fischer, D., & Nickel, D. (2021). Challenges in electroplating of additive manufactured ABS plastics. 68(June), 1378–1386. https://doi.org/10.1016/j.jmapro.2021.06.037
• 31. Tsushima, N., Tamayama, M., Arizono, H., & Makihara, K. (2021). Geometrically nonlinear aeroelastic characteristics of highly flexible wing fabricated by additive manufacturing. Aerospace Science and Technology, 117, 106923. https://doi.org/10.1016/j.ast.2021.106923
• 32. ATALAY Y., (2020). Hybrid additive manufacturing by shaped metal deposition. Yüksek lisans tezi. Gaziantep Üniversitesi Fen Bilimleri Enstitüsü, Gaziantep.
• 33. Mohanavel, V., Ali, K. S. A., Ranganathan, K., Jeffrey, J. A., Ravikumar, M. M., & Rajkumar, S. (2021). Materials Today : Proceedings The roles and applications of additive manufacturing in the aerospace and automobile sector. Materials Today: Proceedings, xxxx. https://doi.org/10.1016/j.matpr.2021.04.596
• 34. Bhatia, A., & Sehgal, A. K. (2021). Materials Today : Proceedings Additive manufacturing materials , methods and applications : A review. Materials Today: Proceedings, xxxx. https://doi.org/10.1016/j.matpr.2021.04.379
• 35. Hashmi, A. W., & Meena, A. (2021). Materials Today : Proceedings Improving the surface characteristics of additively manufactured parts : A review. Materials Today: Proceedings, xxxx. https://doi.org/10.1016/j.matpr.2021.04.223
• 36. Izadifar, M., Chapman, D., Babyn, P., Chen, X., & Kelly, M. E. (2018). UV-Assisted 3D Bioprinting of Nanoreinforced Hybrid Cardiac Patch for Myocardial Tissue Engineering. Tissue Engineering - Part C: Methods, 24(2), 74–88. https://doi.org/10.1089/ten.tec.2017.0346.
• 37. Invernizzi, M., Natale, G., Levi, M., Turri, S., & Griffini, G. (2016). UV-assisted 3D printing of glass and carbon fiber-reinforced dual-cure polymer composites. Materials, 9(7). https://doi.org/10.3390/MA9070583.
• 38. Mantelli, A., Romani, A., Suriano, R., Diani, M., Colledani, M., Sarlin, E., Turri, S., & Levi, M. (2021). Uv-assisted 3d printing of polymer composites from thermally and mechanically recycled carbon fibers. Polymers, 13(5), 1–15. https://doi.org/10.3390/polym13050726.
• 39. Postiglione G. (2021). Uv-assisted 3d printing of polymer composites from thermally and mechanically recycled carbon fibers. Polymers, 13(5), 1–15.
• 40. Barkane, A., Platnieks, O., Jurinovs, M., & Gaidukovs, S. (2020). Thermal stability of UV-cured vegetable oil epoxidized acrylate-based polymer system for 3D printing application. Polymer Degradation and Stability, 181, 109347. https://doi.org/10.1016/j.polymdegradstab.2020.109347
• 41. Kim, Y. C., Hong, S., Sun, H., Kim, M. G., Choi, K., Cho, J., Choi, H. R., Koo, J. C., Moon, H., Byun, D., Kim, K. J., Suhr, J., Kim, S. H., & Nam, J. Do. (2017). UV-curing kinetics and performance development of in situ curable 3D printing materials. European Polymer Journal, 93(February), 140–147. https://doi.org/10.1016/j.eurpolymj.2017.05.041
• 42. Hong, S. Y., Kim, Y. C., Wang, M., Kim, H. I., Byun, D. Y., Nam, J. Do, Chou, T. W., Ajayan, P. M., Ci, L., & Suhr, J. (2018). Experimental investigation of mechanical properties of UV-Curable 3D printing materials. Polymer, 145, 88–94. https://doi.org/10.1016/j.polymer.2018.04.067
• 43. Lee, S., Kim, Y., Park, D., & Kim, J. (2021). The thermal properties of a UV curable acrylate composite prepared by digital light processing 3D printing. Composites Communications, 26(May), 100796. https://doi.org/10.1016/j.coco.2021.100796
• 44. Li, Y., Zhong, J., Wu, L., Weng, Z., Zheng, L., Peng, S., & Zhang, X. (2019). High performance POSS filled nanocomposites prepared via UV-curing based on 3D stereolithography printing. Composites Part A: Applied Science and Manufacturing, 117(July 2018), 276–286. https://doi.org/10.1016/j.compositesa.2018.11.024
• 45. Putra, N. E., Leeflang, M. A., Taheri, P., Fratila-Apachitei, L. E., Mol, J. M. C., Zhou, J., & Zadpoor, A. A. (2021). Extrusion-based 3D printing of ex situ-alloyed highly biodegradable MRI-friendly porous iron-manganese scaffolds. Acta Biomaterialia, 134(xxxx), 774–790. https://doi.org/10.1016/j.actbio.2021.07.042
• 46. Lin, Z., Jiang, T., Kinsella, J. M., Shang, J., & Luo, Z. (2021). Assessing roughness of extrusion printed soft materials using a semi-quantitative method. Materials Letters, 303(July), 130480. https://doi.org/10.1016/j.matlet.2021.130480
• 47. Diba, M., Koons, G. L., Bedell, M. L., & Mikos, A. G. (2021). 3D printed colloidal biomaterials based on photo-reactive gelatin nanoparticles. Biomaterials, 274(April), 120871. https://doi.org/10.1016/j.biomaterials.2021.120871
• 48. Kim, M. H., & Nam, S. Y. (2020). Assessment of coaxial printability for extrusion-based bioprinting of alginate-based tubular constructs. Bioprinting, 20(July), e00092. https://doi.org/10.1016/j.bprint.2020.e00092
• 49. ong, K., Zhang, D., Yin, J., & Huang, Y. (2021). Computational study of extrusion bioprinting with jammed gelatin microgel-based composite ink. Additive Manufacturing, 41(January), 101963. https://doi.org/10.1016/j.addma.2021.101963
• 50. Gospodinova, A., Nankov, V., Tomov, S., Redzheb, M., & Petrov, P. D. (2021). Extrusion bioprinting of hydroxyethylcellulose-based bioink for cervical tumor model. Carbohydrate Polymers, 260(January), 117793. https://doi.org/10.1016/j.carbpol.2021.117793
• 51. Sakai, S., Yoshii, A., Sakurai, S., Horii, K., & Nagasuna, O. (2020). Silk fibroin nanofibers: a promising ink additive for extrusion three-dimensional bioprinting. Materials Today Bio, 8(July). https://doi.org/10.1016/j.mtbio.2020.100078
• 52. Ginestra, P. S., Rovetta, R., Fiorentino, A., & Ceretti, E. (2020). Bioprinting process optimization: Evaluation of parameters influence on the extrusion of inorganic polymers. Procedia CIRP, 89, 104–109. https://doi.org/10.1016/j.procir.2020.05.125
• 53. Kim, M. H., Lee, Y. W., Jung, W. K., Oh, J., & Nam, S. Y. (2019). Enhanced rheological behaviors of alginate hydrogels with carrageenan for extrusion-based bioprinting. Journal of the Mechanical Behavior of Biomedical Materials, 98(February), 187–194. https://doi.org/10.1016/j.jmbbm.2019.06.014
• 54. Liu, S., Mo, L., Bi, G., Chen, S., Yan, D., Yang, J., Jia, Y. G., & Ren, L. (2021). DLP 3D printing porous β-tricalcium phosphate scaffold by the use of acrylate/ceramic composite slurry. Ceramics International, 47(15), 21108–21116. https://doi.org/10.1016/j.ceramint.2021.04.114
• 55. Zhang, J., Huang, D., Liu, S., Dong, X., Li, Y., Zhang, H., Yang, Z., Su, Q., Huang, W., Zheng, W., & Zhou, W. (2019). Zirconia toughened hydroxyapatite biocomposite formed by a DLP 3D printing process for potential bone tissue engineering. Materials Science and Engineering C, 105(July), 110054. https://doi.org/10.1016/j.msec.2019.110054
• 56. Preobrazhenskiy, I. I., Tikhonov, A. A., Evdokimov, P. V., Shibaev, A. V., & Putlyaev, V. I. (2021). DLP printing of hydrogel/calcium phosphate composites for the treatment of bone defects. Open Ceramics, 6(April), 100115. https://doi.org/10.1016/j.oceram.2021.100115
• 57. Foerster, A., Annarasa, V., Terry, A., Wildman, R., Hague, R., Irvine, D., De Focatiis, D. S. A., & Tuck, C. (2021). UV-curable silicone materials with tuneable mechanical properties for 3D printing. Materials and Design, 205, 109681. https://doi.org/10.1016/j.matdes.2021.109681
• 58. Xing, H., Zou, B., Lai, Q., Huang, C., Chen, Q., Fu, X., & Shi, Z. (2018). Preparation and characterization of UV curable Al2O3 suspensions applying for stereolithography 3D printing ceramic microcomponent. Powder Technology, 338, 153–161. https://doi.org/10.1016/j.powtec.2018.07.023
• 59. Jones, C. S., Lu, X., Renn, M., Stroder, M., & Shih, W. S. (2010). Aerosol-jet-printed, high-speed, flexible thin-film transistor made using single-walled carbon nanotube solution. Microelectronic Engineering, 87(3), 434–437. https://doi.org/10.1016/j.mee.2009.05.034
• 60. Zhao, D., Liu, T., Park, J. G., Zhang, M., Chen, J. M., & Wang, B. (2012). Conductivity enhancement of aerosol-jet printed electronics by using silver nanoparticles ink with carbon nanotubes. Microelectronic Engineering, 96, 71–75. https://doi.org/10.1016/j.mee.2012.03.004
• 61. Sukeshini A., M., Meisenkothen, F., Gardner, P., & Reitz, T. L. (2013). Aerosol Jet® Printing of functionally graded SOFC anode interlayer and microstructural investigation by low voltage scanning electron microscopy. Journal of Power Sources, 224, 295–303. https://doi.org/10.1016/j.jpowsour.2012.09.094
• 62. Eckstein, R., Hernandez-Sosa, G., Lemmer, U., & Mechau, N. (2014). Aerosol jet printed top grids for organic optoelectronic devices. Organic Electronics, 15(9), 2135–2140. https://doi.org/10.1016/j.orgel.2014.05.031
• 63. Seifert, T., Baum, M., Roscher, F., Wiemer, M., & Gessner, T. (2015). Aerosol Jet Printing of Nano Particle Based Electrical Chip Interconnects. Materials Today: Proceedings, 2(8), 4262–4271. https://doi.org/10.1016/j.matpr.2015.09.012
• 64. Tait, J. G., Witkowska, E., Hirade, M., Ke, T. H., Malinowski, P. E., Steudel, S., Adachi, C., & Heremans, P. (2015). Uniform Aerosol Jet printed polymer lines with 30 μm width for 140 ppi resolution RGB organic light emitting diodes. Organic Electronics, 22, 40–43. https://doi.org/10.1016/j.orgel.2015.03.034
• 65. Jabari, E., & Toyserkani, E. (2016). Aerosol-Jet printing of highly flexible and conductive graphene/silver patterns. Materials Letters, 174, 40–43. https://doi.org/10.1016/j.matlet.2016.03.082
• 66. Wang, K., Chang, Y. H., Zhang, C., & Wang, B. (2016). Conductive-on-demand: Tailorable polyimide/carbon nanotube nanocomposite thin film by dual-material aerosol jet printing. Carbon, 98, 397–403. https://doi.org/10.1016/j.carbon.2015.11.032
• 67. Goh, G. L., Agarwala, S., Tan, Y. J., & Yeong, W. Y. (2018). A low cost and flexible carbon nanotube pH sensor fabricated using aerosol jet technology for live cell applications. Sensors and Actuators, B: Chemical, 260, 227–235. https://doi.org/10.1016/j.snb.2017.12.127
• 68. Laurent, P., Stoukatch, S., Dupont, F., & Kraft, M. (2018). Electrical characterization of Aerosol Jet Printing (AJP) deposited conductive silver tracks on organic materials. Microelectronic Engineering, 197(April), 67–75. https://doi.org/10.1016/j.mee.2018.06.002
• 69. Khan, S., Nguyen, T. P., Lubej, M., Thiery, L., Vairac, P., & Briand, D. (2018). Low-power printed micro-hotplates through aerosol jetting of gold on thin polyimide membranes. Microelectronic Engineering, 194(March), 71–78. https://doi.org/10.1016/j.mee.2018.03.013
• 70. He, C., Jin, N., Yu, H., Lin, J., & Ma, C. Q. (2019). The electrical sintering and fusing effects of Aerosol-Jet printed silver conductive line. Materials Letters, 246, 5–8. https://doi.org/10.1016/j.matlet.2019.03.016
• 71. Zhang, H., Choi, J. P., Moon, S. K., & Ngo, T. H. (2020). A hybrid multi-objective optimization of aerosol jet printing process via response surface methodology. Additive Manufacturing, 33(December 2019), 101096. https://doi.org/10.1016/j.addma.2020.101096
• 72. Chen, Y. D., Nagarajan, V., Rosen, D. W., Yu, W., & Huang, S. Y. (2020). Aerosol jet printing on paper substrate with conductive silver nano material. Journal of Manufacturing Processes, 58(January), 55–66. https://doi.org/10.1016/j.jmapro.2020.07.064
• 73. Ćatić, N., Wells, L., Al Nahas, K., Smith, M., Jing, Q., Keyser, U. F., Cama, J., & Kar-Narayan, S. (2020). Aerosol-jet printing facilitates the rapid prototyping of microfluidic devices with versatile geometries and precise channel functionalization. Applied Materials Today, 19. https://doi.org/10.1016/j.apmt.2020.100618
• 74. Deneault, J. R., Bartsch, C., Cook, A., Grabowski, C., Berrigan, J. D., Glavin, N., & Buskohl, P. R. (2020). Conductivity and radio frequency performance data for silver nanoparticle inks deposited via aerosol jet deposition and processed under varying conditions. Data in Brief, 33, 106331. https://doi.org/10.1016/j.dib.2020.106331
• 75. Phuah, E. W. C., Hart, W. L., Sumer, H., & Stoddart, P. R. (2020). Patterning of biomaterials by aerosol jet printing: A parametric study. Bioprinting, 18(August 2019), e00081. https://doi.org/10.1016/j.bprint.2020.e00081
• 76. Zhu, Y., Yu, L., Wu, D., Lv, W., & Wang, L. (2021). A high-sensitivity graphene ammonia sensor via aerosol jet printing. Sensors and Actuators, A: Physical, 318, 112434. https://doi.org/10.1016/j.sna.2020.112434
• 77. Rahman, M. T., & Panat, R. (2021). Aerosol jet 3D printing and high temperature characterization of nickel nanoparticle films. Manufacturing Letters, 29, 5–10. https://doi.org/10.1016/j.mfglet.2021.04.006
• 78. Jing, Q., Pace, A., Ives, L., Husmann, A., Ćatić, N., Khanduja, V., Cama, J., & Kar-Narayan, S. (2021). Aerosol-jet-printed, conformable microfluidic force sensors. Cell Reports Physical Science, 2(4). https://doi.org/10.1016/j.xcrp.2021.100386
• 79. Secor, E. B. (2021). Light scattering measurements to support real-time monitoring and closed-loop control of aerosol jet printing. Additive Manufacturing, 44(April), 102028. https://doi.org/10.1016/j.addma.2021.102028
• 80. Baù, M., Ferrari, M., Tonoli, E., & Ferrari, V. (2011). Sensors and energy harvesters based on piezoelectric thick films. Procedia Engineering, 25, 737–744. https://doi.org/10.1016/j.proeng.2011.12.182
• 81. Aminayi P. (2016). Development and evaluation of matrix material formulations for potentıal ıntegratıon ınto ımmunodıagnostıc bıosensorswestern Michigan University, Doctoral thesis.
• 82. Shancheng Y. (2016), Wavelength tuning of the soft approached whispering gallery mode microlasers for display and sensing, Nanyang Technologıcal Unıversıty, Doctoral thesis.
• 83. Sobolewski, P., Goszczynska, A., Aleksandrzak, M., Urbas, K., Derkowska, J., Bartoszewska, A., Podolski, J., Mijowska, E., & Fray, M. El. (2017). A biofunctionalizable ink platform composed of catechol-modified chitosan and reduced graphene oxide/platinum nanocomposite. Beilstein Journal of Nanotechnology, 8(1), 1508–1514. https://doi.org/10.3762/bjnano.8.151
• 84. Rohit A.(2017). Optimization and characterization of a capillary contact micro-plotter for printed electronic devices, Master of Science,
• 85. Molazemhosseini, A., Magagnin, L., Vena, P., & Liu, C. C. (2017). Single-use nonenzymatic glucose biosensor based on CuO nanoparticles ink printed on thin film gold electrode by micro-plotter technology. Journal of Electroanalytical Chemistry, 789, 50–57. https://doi.org/10.1016/j.jelechem.2017.01.041
• 86. Wang, Y., Zhao, C., Wang, C., Cerica, D., Baijot, M., Xiao, Q., Stoukatch, S., & Kraft, M. (2018). A mass sensor based on 3-DOF mode localized coupled resonator under atmospheric pressure. Sensors and Actuators, A: Physical, 279, 254–262. https://doi.org/10.1016/j.sna.2018.06.028
• 87. Holeman T. 2018. The systematic approach to microplotter printing of perovskite precursors, Master of Science, Ohio University.
• 88. Kwon, K. S., Rahman, M. K., Phung, T. H., Hoath, S. D., Jeong, S., & Kim, J. S. (2020). Review of digital printing technologies for electronic materials. Flexible and Printed Electronics, 5(4). https://doi.org/10.1088/2058-8585/abc8ca
• 89. Zymelka, D., Yamashita, T., Sun, X., & Kobayashi, T. (2020). Printed strain sensors based on an intermittent conductive pattern filled with resistive ink droplets. Sensors (Switzerland), 20(15), 1–14. https://doi.org/10.3390/s20154181
• 90. Li, Q., & Liu, J. (2020). Combined Printing of Highly Aligned Single-Walled Carbon Nanotube Thin Films with Liquid Metal for Direct Fabrication of Functional Electronic Devices. Advanced Electronic Materials, 6(9). https://doi.org/10.1002/aelm.202000537