___

• Bai Y., “Pipelines and Risers”, Elsevier, Oxford, UK, (2001).
• Baek J. H., Kim Y. P., Kim K., Kim C.M., Kim W.S. and Seok C. S., , "Effects of pre-strain on the Mechanical Properties of API 5L X65 Pipe" Materials Science and Engineering(A), 527: 1473-1479, (2010).
• Baek J., Kima Y., Kima W., Koo J., Seok C., “Load bearing capacity of API X65 pipe with dent defect under internal pressure and in-plane bending”, Materials Science and Engineering A 540 : 70–82, (2012).
• Cosham A., Hopkins P., “The effect of dents in pipelines guidance in the pipeline defect assessment manual”, International Journal of Pressure Vessels and Piping, 81:127– 139, (2004).
• Ada H., Aksöz S., Fındık T., Çetinkaya C., Bostan B. and Candan İ., “The investigation of effect of welding process on the microstructure and mechanical properties of API 5L X65 steel welded with gas metal arc welding method”, 4th International Conference on Welding Technologies and Exhibition, pp. 674 – 683, Gaziantep, (2016).
• Aksöz S., Ada H., Fındık T., Çetinkaya C., Bostan B. and Candan İ., “The investigation of effect of welding process on the microstructure and mechanical properties of API 5L X65 steel welded with electric arc welding method”, 4th International Conference on Welding Technologies and Exhibition, pp. 684 – 693, Gaziantep, (2016).
• API Specifications 5L, “Specifications for Line Pipe”. 45th Edition, American Petroleum Institute, USA, (2012).
• Hashemi S.H., "Strength - hardness statistical correllation in API X65 steel", Mater. Sci. Eng. A 528 : 1648–1655, (2011).
• Hashemi S.H., Mohammadyani D., “Characterisation of weldmenthardness, impactenergyandmicrostructure in API X65 steel”, Int. J. Pressure Vessels Piping, 98 : 8–15, (2012).
• Rakhshkhorshid M., Hashemi S.H., “Experimental study of hot deformation behavior in API X65 steel”, Materials Science & Engineering A 573 :37–44, (2013).
• N.Bajicand V. Šijaki-Žeravi, “The analysis of change of structural and mechanical properties of welded joints of microalloyed Nb/V steel grade by changing the composition of filler material”, Internat. Conf. On Welding, Belgrade (2003).
• Bajic, N.,Sijacki-Zeravcic, V., Rakin, M.andKovacevic, K., “Structure optimization of weld metal and HAZ in microalloyed high strength steel welded joints”, YUCOMAT 2005, HercegNovi, (SBN: 86-80321-08-7), pp. 193–200, (2005).
• Radovic, A.,Bajic, N., and Grabulov, V., “Specific quality of the weld metal of welded joints of fine-grained microalloyed steels”, Zavarivanje 96, pp. 61–72, Belgrade, (1996).
• Ada, H. "Petrol ve doğalgaz boru hatları için üretilen boruların toz altı ve spiral kaynak yöntemiyle kaynaklanabilirliği ve mekanik özelliklerinin incelenmesi", Yüksek Lisans Tezi, Gazi Üniversitesi Fen Bilimleri Enstitüsü, (2006).
• Migahed M.A., Al-Sabagh A.M., Khamis E.A., Zaki E.G., “Quantum Chemical calculations, synthesis and corrosion inhibition efficiency of ethoxylated-[2-(2-{2-[2-(2-benzenesulfonylaminoethylamino)-ethylamino]-ethylamino}-ethylamino)-ethyl]-4-alkylbenzenesulfonamide on API X65 steel surface under H2S environment”, Journal of Molecular Liquids, 212 : 360–371, (2015).
• Rani, Amitha B.E. and Basu, Bharathibai J., “Green corrosion inhibitors - an overview”, Technical Report, National Aerospace Laboratories, Bangalore, India, (2009).
• Kaya, Y., Kahraman, N., Durgutlu, A., Gülenç, B., “Toz altı ark kaynağı ile birleştirilen farklı kalınlıktaki Grade A gemi saclarının mekanik özelliklerinin araştırılması”, J. New World Sci. Acad. Eng. Sci., 1A0088, 5(2): 348-357, (2010).
• Çetinkaya, C., “Orta karbonlu çeliklerin toz altı ark kaynak yöntemi ile kaynak edilebilirliği ve mekanik özelliklerin incelenmesi”, Politeknik Dergisi, 1(3-4): 61-67, (1998).
• Alizadeh M., Bordbar S., “The influence of microstructure on the protective properties of the corrosion product layer generated on the welded API X70 steel in chloride solution”, Corrosion Science, 70 : 170–179, (2013).
• Kahraman, N., Gülenç, B., Durgutlu, A., “Toz altı ark kaynağı ile kaynaklanan düşük karbonlu çeliklerde serbest tel uzunluğunun mikroyapı ve mekanik özelliklere olan etkisinin araştırılması”, Gazi Üniversitesi Fen Bilimleri Dergisi, 18 (3): 473-480 (2005).
• Deniz A, Çeliklerde Tane Boyutunun Ultrasonik Yöntemle İncelenmesi, Doktora Tezi, Afyon Kocatepe Üniversitesi Fen Bilimleri Enstitüsü, sf 40, Ağustos, (2012).
• Kara R., Tane Boyutunun HMK Kafesli Metallerin Temel Mekanik Özelliklerine Etkisi, Yüksek lisans Tezi, Afyon Kocatepe Üniversitesi Fen Bilimleri Enstitüsü, Afyon, (2005).
• Chen S., Daehn G.S., Vivek A.,Liu B., Hansen S.R., Huang J. and Lin S., “Interfacial microstructures and mechanical property of vaporizing foil actuator welding of aluminum alloy to steel”, Materials Science & Engineering A, 659 : 12–21, (2016).
• Bilmes, P.D., Solari, M., Llorente, C.L. “Characteristics and effects of austenite resulting from tempering of 13Cr–NiMo martensitic steel weld metals. Materials Charac., 46(4), 285–296, (2001).
• Thibault, D., et al., “Reformed austenite transformation during fatigue crack propagation of 13%Cr–4%Ni stainless steel”, Mater. Sci. Eng. A, 528(21), 6519–6526, (2011).
• Özer, A., Aksöz, S., Ada, H., Candan, İ., “Investigation of Metallurgical and Mechanical Properties of Welded Region of API 5L X80 Steel Merged By Electric Arc Welding Method”, 2nd International Multidisciplinary Congress of Eurasia, Odessa, Ukrain, (2016).
• Ada, H., Aksöz, S., Özer, A., Candan İ., "Investigation Of Metallurgical And Mechanical Properties Of Welded Region Of API 5L X80 Steel Merged By Submerged Arc Welding Method", ICAT 2016 International Conference On Advances Technology and Science, Konya, (2016)
• Ada H., Aksöz S., Fındık T., Çetinkaya C., Gülsün M., “Tozaltı Kaynak Yöntemiyle Birleştirilen Petrol ve Doğalgaz Borularının Mikroyapi ve Mekanik Özelliklerinin İncelenmesi”, Politeknik Dergisi, 19;3; 275-282, (2016).
• Ada, H., Aksöz, S., Özer, A., “Investigation of Metallurgical and Mechanical Properties of Welded Region of API 5L X80 Steel Merged By Gas Metal Arc Welding Method”, 2nd International Multidisciplinary Congress of Eurasia, Odessa, Ukrain, (2016).
• Eroğlu M, Aksoy M, “15Mo3 Çeliğinin Kaynağında Enerji Girişinin Kaynak Bölgesinin Mîkroyapısı ve Mekanik Özelliklerine Etkisi”, Kaynak Teknolojisi 2. Ulusal Kongresi, sf 38, (2002).