THE EFFECTS OF HIGH DENSITY POLYETHYLENE ADDITION TO LOW DENSITY POLYETHYLENE POLYMER ON MECHANICAL, IMPACT AND PHYSICAL PROPERTIES

Polyethylene materials are the most widely used polymers which we encountered everywhere in our daily life. Some of the advantages of the polyethylenes are the diversity of production types, corrosion resistance, electrical insulation and recyclability. The main production methods are compression molding, transfer molding, rotational molding, injection molding, gas-assisted injection molding, extrusion and blown film extrusion techniques. It is possible to increase the mechanical properties of low density polyethylene materials by addition of high density polyethylene materials. Both polymer has same monomers but their chemical structure and bonding properties are different. Their physical properties can change with their chemical structure and bonding properties. In this study, 25%, 50% and 75% by weight of high density polyethylene were added to low density polyethylene. Granules were pre-mixed with a mechanical mixer before production of the samples. Plastic injection molding machine was used for specimen preparation. Density, hardness, tensile test, three-point bend test, compression test, tear test and Izod impact tests were performed. Densities and hardness values of the polymer blends decrease by the increasing amount of low density polyethylene. In general, it was observed that the mechanical properties of the polymer blends increase as the high density polyethylene content increase.

___

  • [1] Saçak, M., Polimer Kimyası (Polymer Chemistry), Gazi Kitabevi, Ankara, TR, 2008.
  • [2] Akkurt, S., Plastik Malzeme Bilimi Teknolojisi ve Kalıp Tasarımı (Plastic Material Science Technology and Mold Design), Birsen Yayınevi, İstanbul, TR, 2007.
  • [3] Akdoğan, E. and Yurtseven, R. (2016). The Effects of Ammonium Polyphosphate and Boron Containing Flame Retardants on Mechanical Properties of Thermoplastic Polyurethane Materials. 16th International Materials Symposium (IMSP'2016), Denizli, TR, 262-270.
  • [4] Taşdemir, M., Polimer Karışımları ve Uygulamaları (Polymer Blends and Applications), Seçkin Yayıncılık, Ankara, TR, 2016.
  • [5] Shebani, A., Klash, A., Elhabishi, R., Abdsalam, S., Elbreki, H. and Elhrari, W., (2018). The Influence of LDPE Content on the Mechanical Properties of HDPE/LDPE Blends, Research & Development in Material Science, 7(5), 1-7.
  • [6] Sarkhel, G., Banerjee, A. and Bhattacharya, P., (2006). Rheological and Mechanical Properties of LDPE/HDPE Blend, Polymer-Plastics Technology and Engineering, 45, 713-718.
  • [7] Cho, K., Lee, B.H., Hwang, K., Lee, H., and Choe, S., (1998). Rheological and Mechanical Properties in Polyethylene Blends, Polymer Engineering and Science, 38(12), 1969-1975.
  • [8] Li, D., Zhou, L., Wang, X., and Yang, X., (2019). Effect of Crystallinity of Polyethylene with Different Densities on Breakdown Strength and Conductance Property, Materials, 12(11), 1746-1758.
  • [9] Ren, Y., Shi, Y., Yao, X., Tang, Y., and Liu, L.Z., (2019). Different dependence of tear strength on film orientation of LLDPE made with different co-monomer. Polymers, 11(3), doi:10.3390/polym11030434.
  • [10] ASTM D256, Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics, ASTM International, West Conshohocken, PA, U.S.A., (2013).
  • [11] ASTM D618, Standard Practice for Conditioning Plastics for Testing, ASTM International, West Conshohocken, PA, U.S.A., (2013).
  • [12] ASTM D624, Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers, ASTM International, West Conshohocken, PA, U.S.A., (2012).
  • [13] ASTM D638, Standard Test Method for Tensile Properties of Plastics, ASTM International, West Conshohocken, PA, U.S.A., (2014).
  • [14] ASTM D790, Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials, ASTM International, West Conshohocken, PA, U.S.A., (2017).
  • [15] ASTM D792, Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement, ASTM International, West Conshohocken, PA, U.S.A., (2013).
  • [16] ASTM D2240, Standard Test Method for Rubber Property-Durometer Hardness, ASTM International, West Conshohocken, PA, U.S.A., (2015).