EFFECT OF WC REINFORCED ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF CUALMN ALLOYS PRODUCED BY HOT PRESSING METHOD

Öz In this study, the effect of WC reinforcing particles on the microstructure and mechanical properties of CuAlMn and CuAlMn-WC alloy produced by powder metallurgy method was investigated by adding 5 %, 10 % and 15 % by volume WC to CuAlMn alloy. Cu, Al, Mn and WC powders of approximately 99.9 % purity with a grain size of 325 mesh were used in the production of the alloys. The samples were produced by hot pressing method at 900 ℃ temperatures under 35 MPa pressure for 6 minutes. Microstructure, phase formation, hardness and corrosion properties of the samples were investigated in detail. Scanning electron microscopy (SEM) was used for microstructure analysis and X-ray diffractogram (XRD) was used for phase formation detection. The hardness measurements of the samples were measured by microhardness measuring device. The corrosion tests were performed potentiodynamic polarization curves of the composite materials in 3.5% NaCl solution. As a result, it has been determined that the mechanical properties of WC reinforcing particles added to CuAlMn matrix increase with increasing volume ratio.

Kaynakça

Referans33 Liu, J., Chang, L., Liu, H., Li, Y., Yang, H. and Ruan, J. (2017). Microstructure, mechanical behavior and biocompatibility of powder metallurgy Nb-Ti-Ta alloys as biomedical material. Materials Science and Engineering: C, 71, 512-519.

Referans36 Ji, X., Wang, Q., Yin, F., Cui, C., Ji, P. and Hao, G. (2018). Fabrication and properties of novel porous CuAlMn shape memory alloys and polymer/CuAlMn composites. Composites Part A: Applied Science and Manufacturing, 107, 21-30.

Kaynak Göster

Bibtex @araştırma makalesi { ejt697601, journal = {European Journal of Technique (EJT)}, issn = {2536-5010}, eissn = {2536-5134}, address = {INESEG Yayıncılık Dicle Üniversitesi Teknokent, Sur/Diyarbakır}, publisher = {Hibetullah KILIÇ}, year = {2020}, volume = {10}, pages = {173 - 183}, doi = {10.36222/ejt.697601}, title = {EFFECT OF WC REINFORCED ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF CUALMN ALLOYS PRODUCED BY HOT PRESSING METHOD}, key = {cite}, author = {Çetin, Tayfun and Akkaş, Mehmet} }
APA Çetin, T , Akkaş, M . (2020). EFFECT OF WC REINFORCED ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF CUALMN ALLOYS PRODUCED BY HOT PRESSING METHOD . European Journal of Technique (EJT) , 10 (1) , 173-183 . DOI: 10.36222/ejt.697601
MLA Çetin, T , Akkaş, M . "EFFECT OF WC REINFORCED ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF CUALMN ALLOYS PRODUCED BY HOT PRESSING METHOD" . European Journal of Technique (EJT) 10 (2020 ): 173-183 <https://dergipark.org.tr/tr/pub/ejt/issue/54746/697601>
Chicago Çetin, T , Akkaş, M . "EFFECT OF WC REINFORCED ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF CUALMN ALLOYS PRODUCED BY HOT PRESSING METHOD". European Journal of Technique (EJT) 10 (2020 ): 173-183
RIS TY - JOUR T1 - EFFECT OF WC REINFORCED ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF CUALMN ALLOYS PRODUCED BY HOT PRESSING METHOD AU - Tayfun Çetin , Mehmet Akkaş Y1 - 2020 PY - 2020 N1 - doi: 10.36222/ejt.697601 DO - 10.36222/ejt.697601 T2 - European Journal of Technique (EJT) JF - Journal JO - JOR SP - 173 EP - 183 VL - 10 IS - 1 SN - 2536-5010-2536-5134 M3 - doi: 10.36222/ejt.697601 UR - https://doi.org/10.36222/ejt.697601 Y2 - 2020 ER -
EndNote %0 European Journal of Technique EFFECT OF WC REINFORCED ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF CUALMN ALLOYS PRODUCED BY HOT PRESSING METHOD %A Tayfun Çetin , Mehmet Akkaş %T EFFECT OF WC REINFORCED ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF CUALMN ALLOYS PRODUCED BY HOT PRESSING METHOD %D 2020 %J European Journal of Technique (EJT) %P 2536-5010-2536-5134 %V 10 %N 1 %R doi: 10.36222/ejt.697601 %U 10.36222/ejt.697601
ISNAD Çetin, Tayfun , Akkaş, Mehmet . "EFFECT OF WC REINFORCED ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF CUALMN ALLOYS PRODUCED BY HOT PRESSING METHOD". European Journal of Technique (EJT) 10 / 1 (Haziran 2020): 173-183 . https://doi.org/10.36222/ejt.697601
AMA Çetin T , Akkaş M . EFFECT OF WC REINFORCED ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF CUALMN ALLOYS PRODUCED BY HOT PRESSING METHOD. EJT. 2020; 10(1): 173-183.
Vancouver Çetin T , Akkaş M . EFFECT OF WC REINFORCED ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF CUALMN ALLOYS PRODUCED BY HOT PRESSING METHOD. European Journal of Technique (EJT). 2020; 10(1): 173-183.
IEEE T. Çetin ve M. Akkaş , "EFFECT OF WC REINFORCED ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF CUALMN ALLOYS PRODUCED BY HOT PRESSING METHOD", European Journal of Technique (EJT), c. 10, sayı. 1, ss. 173-183, Haz. 2020, doi:10.36222/ejt.697601