Doku Mühendisliğinde Doku İskelesi Tasarımında Kullanılan Güncel 3 Boyutlu Yazdırma Teknolojileri

Bu çalışmada günümüzde kullanılan 3 boyutlu yazdırma teknolojileri incelenmiş ve biyoyazdırma için kullanılan yazdırma teknolojileri arasında en uygun doku iskelesi inşa edenler tanımlanmıştır. Araştırma kapsamında üretilmesi hedeflenen doku yapısına göre kullanılacak olan biyomalzemelere uygun 3 boyutlu yazıcıların özellikleri, 3 boyutlu yazıcıların doku mühendisliği için gerekli olan gözeneklilik, yapısal dayanım, pürüzsüzlük, biyoçözünürlük kalitesini sağlama koşullarına yer verilmiştir. Bu araştırmada özetlenmiş olan bulgular, Doku İskelesi Tasarımı ve 3 Boyutlu Yazdırma Teknolojileri gibi biyoyazdırma uygulamaları ile ilgilenen akademik ve sanayi çevre için yararlı olacaktır.

Anahtar Kelimeler:

3 Boyutlu yazdırma, doku iskelesi, doku mühendisliği

Current 3 Dimensional Printing Technologies Used in Scaffold Design in Tissue Engineering

In this study, current 3 dimensional printing technologies have been critically reviewed and most suitable printer technologies for tissue scaffold building used in bioprinting has been identified. The specifications of 3 dimensional printers appropriate for biomaterials used in building artificial tissue structures include the bioplotter’s ability to provide porosity, structural strength, smoothness and biodegradability conditions required for tissue engineering. The findings outlined in this paper can be useful to both academic and industry followers interested in bioprinting applications such as Scaffold Design and manufacturing by 3 Dimensional Printer Technologies.

Keywords:

3 Dimensional printing, scaffold, tissue engineering,

PDF

___

Bajaj, P., et al., 3D Biofabrication Strategies for Tissue Engineering and Regenerative Medicine. Annual Review of Biomedical Engineering, 2014. 16(1): p. 247-276.
Xiaohong, W., et al., 3D Bioprinting Technologies for Hard Tissue and Organ Engineering. Materials (1996-1944), 2016. 9(10): p. 1-23.
Melchels, F.P.W., et al., Additive manufacturing of tissues and organs. Progress in Polymer Science, 2012. 37(8): p. 1079-1104.
O'Brien, F.J., Biomaterials and scaffolds for tissue engineering. Materials Today, 2011. 14(3): p. 88-95.
Hutmacher, D.W., Scaffolds in tissue engineering bone and cartilage. Biomaterials, 2000. 21(24): p. 2529-2543.
Leckart, S. How 3-D Printing Body Parts Will Revolutionize Medicine. Popular Science, 2013.
Chen, A.A., et al., 3-D Fabrication Technology for Tissue Engineering. BioMEMS and Biomedical Nanotechnology, 2007: p. 23-38.
Gu, B.K., et al., 3-dimensional bioprinting for tissue engineering applications. Biomater Res, 2016. 20: p. 12.
Abdelaal, O.A. and S.M. Darwish, Fabrication of Tissue Engineering Scaffolds Using Rapid Prototyping Techniques. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 2011: p. 2317-2325.
Sun, W., et al., Computer Aided Tissue Engineering: Overview, Scope and Challenges. Biotechnology Applied Biochemistry, 2004: p. 29-47.
Sing, S.L., et al., Laser and electron-beam powder-bed additive manufacturing of metallic implants: A review on processes, materials and designs. Journal of Orthopaedic Research, 2016. 34(3): p. 369 - 385.
Murphy, S.V. and A. Atala, 3D bioprinting of tissues and organs. Nat Biotechnol, 2014. 32(8): p. 773-85.
Tasoglu, S. and U. Demirci, Bioprinting for stem cell research. Trends Biotechnol, 2013. 31(1): p. 10-9.
Kim, J.D., et al., Piezoelectric inkjet printing of polymers: Stem cell patterning on polymer substrates. Polymer, 2010. 51(10): p. 2147-2154.
Fang, Y., et al., Rapid generation of multiplexed cell cocultures using acoustic droplet ejection followed by aqueous two-phase exclusion patterning. Tissue Eng Part C Methods, 2012. 18(9): p. 647-57.
Miranda, P., et al. Sintering and robocasting of beta-tricalcium phosphate scaffolds for orthopaedic applications. 2005 [cited 2016 October]; Available from: http://escholarship.org/uc/item/7b08w22z.
Selimis, A. and M. Farsari, Laser-Based 3D Printing and Surface Texturing. 2016: p. 111-136.