M. ASGAR, E. AFJEI, M. M. MAHMOODI, A. R. BAHRAMI, E. Z. ALIABADI

A Double-Stator Switched Reluctance Motor for Direct-Drive Washing Machine Application

Abstract. Switched reluctance motors (SRMs) are known as an economical solution by several unique features such as: simple structure and low cost maintenance. Furthermore, due to the lack of permanent magnet, powerful and economical structure of these types of motors, they are proposed as a good choice for use in household appliances. In this paper, a high power flat-type double-stator SRM with low operating voltage in direct-drive system is introduced. Initially, proportional to the intended application, the acceptable attribute of SRM structure is selected, and was followed by the calculation of the motor design. Next, the magnetic characteristics are analyzed by finite element method (FEM) to determine the efficiency of the motor. Finally, the collection of experimental data is tested to confirm the calculated values and the simulation results and ensure the proper functioning of the obtained collection.

Keywords:

Switched reluctance motors, Şnite element analysis, double-stator motors, direct-drive, washing machine,

PDF

___

Mosallanejad, A. (2014), “Analyses of the Effect of Length Difference between Plunger and Winding on Tubular Linear Reluctance Motor Performance,” International Transactions on Electrical Energy Systems, pp. n/a-n/a,
Labak, A. and Kar, N. C. (2013), “Designing and Prototyping a Novel Five-Phase Pancake- Shaped Axial-Flux SRM for Electric Vehicle Application Through Dynamic FEA Incorporating Flux-Tube Modeling,” IEEE Transactions on Industry Applications, vol. 49, issue 3, pp. 1276– 1288.
Zhang, H. Xu, W. Wang, S. et al. (2014), “Optimum Design of Rotor for High-Speed Switched Reluctance Motor Using Level Set Method,” IEEE Transactions on Magnetics, under publication vol. 50, issue 2.
Torkaman, H. Afjei, E. and Toulabi, M. S. (2012), “New Double-Layer-per-Phase Isolated Switched Reluctance Motor: Concept, Numerical Analysis, and Experimental Confirmation,” IEEE Transactions on Industrial Electronics, vol. 59, no. 2, pp. 830-838.
Jun, C. Zhiquan, D. and Rongguang, H. (2014), “Position Signal Faults Diagnosis and Control for Switched Reluctance Motor,” IEEE Transactions on Magnetics, vol. 50, no. 9, pp. 1- 11.
Yu, Q. and Gerling, D. (2013), “Analytical Modeling of a Canned Switched Reluctance Machine with Multilayer Structure,” IEEE Transactions on Magnetics, vol. 49, no. 9, pp. 5069- 5082.
Isfahani, A. H. and Fahimi, B. (2014), “Comparison of Mechanical Vibration between a Double-Stator Switched Reluctance Machine and a Conventional Switched Reluctance Machine,” IEEE Transactions on Magnetics, vol. 50, no. 2, pp. 293-296.
Da-Woon, C. Sang-In, B. and Yun-Hyun, C. (2014), “A Study on the Maximum Power Control Method of Switched Reluctance Generator for Wind Turbine,” IEEE Tran. On Magnetics, vol. 50, no. 1, pp. 1-4.
Magnet CAD package, (2007), “User manual,”Infolytica Corporation Ltd.
Peter Balazovic and Roman Filka, (2011), “Sensorless PMSM Control for an H-axis Washing Machine Drive," Freescale Semiconductor.
Bojoi, R. He, B. Rosa, F. et al., (2011), “Sensorless Direct Flux and Torque Control for Direct-drive Washing Machine Applications,” IEEE in Energy Conversion Congress and Exposition (ECCE), pp. 347-354.
Murray, A. Palma, M. and Husain, A. (2008), “Performance Comparison of Permanent Magnet Synchronous Motors and Controlled Induction Motors in Washing Machine Applications Using Sensorless Field Oriented Control,” IEEE In Industry Applications Society Annual Meeting, IAS'08., pp. 1-6.