Determination of Petrophysical Parameters of Ilam Formation in Abteimoor Oilfield

ISSN: 2587-2680
Yayın Aralığı: Yılda 4 Sayı
Başlangıç: 2002
Yayıncı: SİVAS CUMHURİYET ÜNİVERSİTESİ > FEN FAKÜLTESİ

Abstract. In this study, petrophysical parameters of Ilam Formation have been studied using well logs, two selected wells from Aabteimoor oil field and specialized GEOLOG 6.7 software with probability statistics method (Probabilistic). Petrophysical parameters were determined from well log diagrams. Accordingly, there are appropriate porosity and water saturation in this horizon, such that the average effective porosity and water saturation are 21.2 and 30.2 %, respectively. Based on Neutron- density cross-plot, it is determined that Ilam Formation lithology is composed of limestone, dolomite and in some intervals, shale. Also shale volume is low according to CGR charts so that its mean value is 0.65%.

Keywords:

oil field in the Aabteimoor, Elam Formation petrophysical parameters, wireline well logs,

PDF

___

Motiee, H. 1387. Petroleum Geology of Carbonate Rocks, the Aryan Press, Vol. I, page 402.
Arian, M. 1389. The geological history of Iranian oil, precious publications, first edition, page271.
Hearst, J. R., Nelson, P.H., and Paillet, F.L., 2000, Well logging for physical properties, John Wiley & Sons Ltd,. Chilchester., 411-439.
Schlumberger, (1989). Log interpretation Chart, Huston Texas, 121-123.
Tiab, D., (2000). Advances in petrophysics,university of Oklaho, 129-169.
Fertle, W. H., (1981). Open Hole cross-Plots Concepts-A Power-ful Technique in Well log Analysis, J.Pet.Tech, March, 535-549.
Archie, G. E.,. (1950). Introduction to Petrophysics of Reservoir Rocks, Am.Assoc.Pet. Geol. Bul., 943-961.
Poupon, A., and leveaux, J., (1971), evaluation of water saturation in shaly formations, trans. SPWLA 12th annual logging symposium, o1-2.